Messages

1

OpenBSD / Just A Suggestion For Openbsd Zaurus Site

« on: February 09, 2007, 07:35:30 am »

Just a suggestion for OpenBSD zaurus site http://www.openbsd.org/zaurus.html

It would be good to have some dates on the changes and latest news on the main page, and where possible on sub-pages in future so that those of us who come in to check on changes or are thinking of trying it out know in a glance if there were any significant changes and if the current build is something we've not tried.

Anyway, hope to see OpenBSD and NetBSD work out!
[div align=\"right\"][a href=\"index.php?act=findpost&pid=152809\"][{POST_SNAPBACK}][/a][/div]

here is my vote for this

2

OpenBSD / New Install On Sl-c3200

« on: January 08, 2007, 11:48:43 pm »

Hi Hus,

you mentioned in an earlier post the Ambicom WL1100C-CF. Just saw it on
ebay - how was your experience with this card since then?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=149486\"][{POST_SNAPBACK}][/a][/div]

Hello mondrian,

sorry it was a long new year

yes the card is fine, works on both Linux and OpenBSD out of the box

3

OpenBSD / New Install On Sl-c3200

« on: December 29, 2006, 12:08:56 pm »

Hi,

I just ran into the same trouble. After following this thread, it would
probably the best for me to get a new wireless, too. Or did happen
anything new in this respect during the last half year?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=149427\"][{POST_SNAPBACK}][/a][/div]

Hi mondrian,

i didn't test this card again, but i believe still not working under openbsd

4

Zaurus - pdaXrom / 1.1.0r121 Is Out!

« on: September 23, 2006, 12:49:44 am »

The following worked on my 3100 after I reached the emergency system

Code: [Select]

# mount /dev/hdc1 /mnt/cf
# cd /mnt/cf
# ./autoboot.sh /mnt/cfnot as much typing for the lazy

good luck
webslngr
[div align=\"right\"][a href=\"index.php?act=findpost&pid=142078\"][{POST_SNAPBACK}][/a][/div]

Great! that's save the time looking to autoboot.sh script and copy&paste proccess
ok now we have a bootable system let's get down to fix minor issues and optimize it, do u have a flickiring screen when overclocking to 520? also it seems i can't get rid of screen shadow with any value i have tried to adj screen: any recomended values?

by the way there are no guides or tips regard using pdaxrom with internal 6GB hard drive, just wondering how to utilize a good HD scheme to wotk with pdaXrom.


thanks for the tip about autooboot.sh script

5

Zaurus - pdaXrom / 1.1.0r121 Is Out!

« on: September 22, 2006, 01:05:14 pm »

Tested on SL-C3200 works fine, no problems so far, the installation a bit tricky and i had to do it manualy. great to have on sl-c3200
[div align=\"right\"][a href=\"index.php?act=findpost&pid=141934\"][{POST_SNAPBACK}][/a][/div]

How did you go about installing it manually?  I can get to the point where I flash the new emergency system, but then on reboot there is no activity or charging light.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=141945\"][{POST_SNAPBACK}][/a][/div]

boot to emergency system

and do the installation manually ( i use cf card ) so

Code: [Select]

mount /dev/hdc1 /mnt/cf
cd /mnt/cf
nandlogical /dev/mtd1 WRITE 0x5a0000 0x160000 kernel.img
flash_eraseall /dev/mtd2
nandwrite /dev/mtd2 rootfs.img
reboothave fun

6

Zaurus - pdaXrom / 1.1.0r121 Is Out!

« on: September 21, 2006, 03:45:45 am »

Tested on SL-C3200 works fine, no problems so far, the installation a bit tricky and i had to do it manualy. great to have on sl-c3200

7

OpenBSD / 4.0 Appearing In Snapshots

« on: August 06, 2006, 11:35:36 am »

Fully up on snapshots now
X is there :>

8

OpenBSD / Openbsd Zaurus Screenshots

« on: August 05, 2006, 03:18:44 am »

Cool screenshots mathemajikian!, yeah that the OpenBSD as it should be

By the way did you tried to compile the new ettercap NG 7.3, i tried with no luck, it will be awesome if hand a help here.

PS: Zaurus looks cool without those screen stickers on it

9

Accessories / Anyone Has Try A Usb To Eth Adaptor On C1000?

« on: August 05, 2006, 03:10:18 am »

Wich module load it ?

THANKS

Bye

P.S. Work without the supplied USB HUB  ?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=137130\"][{POST_SNAPBACK}][/a][/div]

aaah! so sorry for late replay, i was busy lately with my research!

in openbsd it appear as ause0, no need a USB HUB

but as i said it throw lots of errors and after while stop and i need to unplug it and plug it again. (software issue it may because of my configuration)

10

Accessories / Anyone Has Try A Usb To Eth Adaptor On C1000?

« on: August 01, 2006, 05:25:56 am »

Hello, i bougth a C1000 and i would buy this accessories :

http://cgi.ebay.it/USB-to-LAN-RJ45-Etherne...1QQcmdZViewItem

Someone has try this periferic ? Work ?

THANKS

Bye
[div align=\"right\"][a href=\"index.php?act=findpost&pid=137127\"][{POST_SNAPBACK}][/a][/div]

it looks exactly the same one i have, (not sure about the brand) but it looks the same

i use it with *SL-C3200* works ok, with OpenBSD works but the screen throwing lots of errors and after while it looks up the connection

11

OpenBSD / 4.0 Appearing In Snapshots

« on: July 29, 2006, 01:52:24 pm »

fine. ill hop on a plane for the next 26 hours and meet you on brunswick street... or will you be at the wickham? haha kidding :)
[div align=\"right\"][a href=\"index.php?act=findpost&pid=136874\"][{POST_SNAPBACK}][/a][/div]

So close :) just start your kismet there and look for SSID "zaurus"

the nwkey 0xf412345678, then in web browser goto URL "http://10.1.1.50:40" in the text box write "0p3nB2D" now the ssh port unlocked, do ssh 10.1.1.50

user: zaurus
pass: onlyBSD

when you login you will be asked to fill the following:

----------------- MOTD

Welcome to zaurus underground spot number: 621 | Location: Brisbane-City

your name: ******
your new password: ****
Confirm password: ****
Sex: M/F
Age: **

E-Mail: ***@***
Confirm Email: ***@***

You may now surf the internet, please check your email ASAP for your assignment details.

--------------------- The E-Mail part will be look like this

Greeting Mate!

Your mission, should you decide to accept it, is to implement OpenBSD boot loader that free us "Your PEOPLE" from Linux! consider that the /boot & kernel should be in the flash area.

This zaurus will self-destruct in 5 seconds! unless you do the octopus move "Reset + D+M"

Good luck Mate!

------------------------------------ EOF

<==- That's what you end up with after the 7th beer :> ** PARTY TIME**

12

OpenBSD / Sl-c3200 Full Hd “openbsd Hallelujah”

« on: July 29, 2006, 09:41:13 am »

Before i forgot! here is some tunning tips and starting xdm at startup, i'll drop them here and if you wonder what they do try to search the forum and google ( the guys who posted them they provide a lot of explanation specially Andy posts here regard fine tunning OpenBSD

***** NOTE: it's just to give an idea it may not reflect to what do u have in your config files, i just collect it from this forum and internet to boot to gui and gain little speed ******

Code: [Select]

vi /etc/sysctl.conf

vm.swapencrypt.enable=0
kern.stackgap_random=0

machdep.kbdreset=1
machdep.apmwarn=5
machdep.maxspeed=520

net.inet.tcp.recvspace=65536
net.inet.tcp.sendspace=65536
starting apmd, xdm and hotplugd

Code: [Select]

vi /etc/rc.conf

apmd_flags=""
hotplugd_flags=""
xdm_flags=""
adding softdep & noatime **depend on ur configuration not exactly the same**

Code: [Select]

vi /etc/fstab

/dev/wd0a / ffs rw,softdep,noatime 1 1
/dev/wd0b none swap sw 0 0
Turnning off ttyC0 and 1 to use xdm

Code: [Select]

vi /etc/ttys

ttyC0 "/usr/libexec/getty Pc" vt220 off secure
ttyC1 "/usr/libexec/getty Pc" vt220 off secure
finally the malloc thing in the console

Code: [Select]

ln -s 'azjgpHR' /etc/malloc.conf
AS I SAID B4 to have an idea you may search for more info
i'm not sure if that will give problems, but for me it looks ok (i only have a suspend problem) and it boots to xdm

13

OpenBSD / Sl-c3200 Full Hd “openbsd Hallelujah”

« on: July 29, 2006, 09:11:28 am »

Got it installed!! Thanks for all the help! Works like a champ. I think I messed up the first time by selecting a mount point for partition a and not changing the config files correctly. I dont know. I'm off to build fluxbox! THANKS!!!!!!!!!!!!!!!!!
[div align=\"right\"][a href=\"index.php?act=findpost&pid=136834\"][{POST_SNAPBACK}][/a][/div]

Congrats! and welcome to FREE world :> (Keep it secret don't tell anyone it's free OS)

14

OpenBSD / 4.0 Appearing In Snapshots

« on: July 29, 2006, 06:01:53 am »

Ok for this good news going to start a party tonight in the middle of Brisbane City!!

Great News!!! thanks guys

15

OpenBSD / Sl-c3200 Full Hd “openbsd Hallelujah”

« on: July 29, 2006, 05:58:28 am »

cacko mounts /dev/mtdblock2 to / according to fstab. I cd /etc/pcmcia and did a 'more config'. I looked over everything that had ide mentioned and everything was already edited? There was nothing in the form ide-cs. I have attached the config file to this post. Let me know if you see anything wrong.

 [ Invalid Attachment ]
[div align=\"right\"][{POST_SNAPBACK}][/a][/div]

wait!! you are using cacko? not the full HD install (tiny-rom) and files provided by Andy (iamasmith) in his guide?

if you want to use cacko and OpenBSD better to follow the official install guide here [a href=\"ftp://ftp.openbsd.org/pub/OpenBSD/3.9/zaurus/INSTALL.zaurus]zaurus.INSTALL[/url]

basiclly install the ipk provided to install OpenBSD.

What i have mentioned it in this topic is the installation for FULL HD using small cutom rom been submeted by Andy here https://www.oesf.org/forums/index.php?showtopic=17213
using the file he provides and simple edit i have explain it in this post.

try to go back to iamasmith (Andy) guide and see what you have missed.