Messages

1

Zaurus - pdaXrom / On Device Development?

« on: January 04, 2007, 01:20:19 pm »

Thanks guys!  

2

Zaurus - pdaXrom / On Device Development?

« on: January 04, 2007, 04:02:45 am »

Dears,

is there any possibility to install a development environment (gcc and friends) on the Z to do on-board development?

Thanks,

  Torsten

3

Sharp ROMs / Planex Wifi Card Problems With Cacko1.23

« on: December 05, 2006, 04:12:12 am »

The card is most problably not broken.

Here (Post # 16)
is described how to solve the problem for pdaXrom.
As far as I recall, the firmware files are actually present in Cacko so that the card should work without tweaking.

Had anyone success with that Card? I installed Cacko 1.23 and tried a lot of hints, but no luck at all. The log says:

Code: [Select]

pxa_pcmcia_suspend(0)
wifi0: cannot get RID fd51 (len=6) - no PRI f/w
hostap_cs: CS_EVENT_PM_RESUME
hostap_cs: CS_EVENT_CARD_RESET
wifi0: __hfa384x_cmd_no_wait(6) - timeout - reg=0xb2e9
hostap_cs: first command failed - assuming card does not have primary firmware
hostap_cs: assuming no Primary image in flash - card initialization not completed
wlan0 (WE) : Buffer for request SIOCGIWPRIV too small (16<88)
wlan0 (WE) : Buffer for request SIOCGIWPRIV too small (32<88)
wlan0 (WE) : Buffer for request SIOCGIWPRIV too small (64<88)
wlan0 (WE) : Buffer for request SIOCGIWPRIV too small (16<88)
wlan0 (WE) : Buffer for request SIOCGIWPRIV too small (32<88)
wlan0 (WE) : Buffer for request SIOCGIWPRIV too small (64<88)
wlan0 (WE) : Buffer for request SIOCGIWPRIV too small (16<88)
wlan0 (WE) : Buffer for request SIOCGIWPRIV too small (32<88)
wlan0 (WE) : Buffer for request SIOCGIWPRIV too small (64<88)
wlan0 (WE) : Buffer for request SIOCGIWPRIV too small (16<88)
wlan0 (WE) : Buffer for request SIOCGIWPRIV too small (32<88)
wlan0 (WE) : Buffer for request SIOCGIWPRIV too small (64<88)
wifi0: cannot get RID fd51 (len=6) - no PRI f/w
wlan0 (WE) : Buffer for request SIOCGIWPRIV too small (16<88)
wlan0 (WE) : Buffer for request SIOCGIWPRIV too small (32<88)
wlan0 (WE) : Buffer for request SIOCGIWPRIV too small (64<88)
wlan0 (WE) : Buffer for request SIOCGIWPRIV too small (16<88)
wlan0 (WE) : Buffer for request SIOCGIWPRIV too small (32<88)
wlan0 (WE) : Buffer for request SIOCGIWPRIV too small (64<88)
wifi0: cannot get RID fd51 (len=6) - no PRI f/w
hostap_cs: CS_EVENT_PM_SUSPEND
hostap_cs: CS_EVENT_RESET_PHYSICAL
wifi0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wifi0: hfa384x_cmd_issue - timeout - reg=0xb2e9
wifi0: hfa384x_cmd: entry still in list? (entry=c3f96c20, type=0, res=-1)
wifi0: hfa384x_cmd: interrupted; err=-110
hostap_cs: Shutdown failed
pxa_pcmcia_suspend(0)
hostap_cs: CS_EVENT_PM_RESUME
hostap_cs: CS_EVENT_CARD_RESET
wifi0: __hfa384x_cmd_no_wait(6) - timeout - reg=0xb2e9
hostap_cs: first command failed - assuming card does not have primary firmware
hostap_cs: assuming no Primary image in flash - card initialization not completed
wlan0 (WE) : Buffer for request SIOCGIWPRIV too small (16<88)
wlan0 (WE) : Buffer for request SIOCGIWPRIV too small (32<88)
wlan0 (WE) : Buffer for request SIOCGIWPRIV too small (64<88)
wlan0 (WE) : Buffer for request SIOCGIWPRIV too small (16<88)
wlan0 (WE) : Buffer for request SIOCGIWPRIV too small (32<88)
wlan0 (WE) : Buffer for request SIOCGIWPRIV too small (64<88)
wlan0 (WE) : Buffer for request SIOCGIWPRIV too small (16<88)
wlan0 (WE) : Buffer for request SIOCGIWPRIV too small (32<88)
wlan0 (WE) : Buffer for request SIOCGIWPRIV too small (64<88)
wifi0: cannot get RID fd51 (len=6) - no PRI f/w
wlan0 (WE) : Buffer for request SIOCGIWPRIV too small (16<88)
wlan0 (WE) : Buffer for request SIOCGIWPRIV too small (32<88)
wlan0 (WE) : Buffer for request SIOCGIWPRIV too small (64<88)
hostap_cs: CS_EVENT_PM_SUSPEND
hostap_cs: CS_EVENT_RESET_PHYSICAL
wifi0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wifi0: hfa384x_cmd_issue - timeout - reg=0xb2e9
wlan0 (WE) : Buffer for request SIOCGIWPRIV too small (64<88)
wlan0 (WE) : Buffer for request SIOCGIWPRIV too small (16<88)
wlan0 (WE) : Buffer for request SIOCGIWPRIV too small (32<88)
wlan0 (WE) : Buffer for request SIOCGIWPRIV too small (64<88)
wifi0: cannot get RID fd51 (len=6) - no PRI f/w
hostap_cs: CS_EVENT_PM_SUSPEND
hostap_cs: CS_EVENT_RESET_PHYSICAL
wifi0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wifi0: hfa384x_cmd_issue - timeout - reg=0xb2e9
wifi0: hfa384x_cmd: entry still in list? (entry=c3f96c20, type=0, res=-1)
wifi0: hfa384x_cmd: interrupted; err=-110
hostap_cs: Shutdown failed
pxa_pcmcia_suspend(0)
hostap_cs: CS_EVENT_PM_RESUME
hostap_cs: CS_EVENT_CARD_RESET
wifi0: __hfa384x_cmd_no_wait(6) - timeout - reg=0xb2e9
hostap_cs: first command failed - assuming card does not have primary firmware
hostap_cs: assuming no Primary image in flash - card initialization not completed
wlan0 (WE) : Buffer for request SIOCGIWPRIV too small (16<88)
wlan0 (WE) : Buffer for request SIOCGIWPRIV too small (32<88)
wlan0 (WE) : Buffer for request SIOCGIWPRIV too small (64<88)
wlan0 (WE) : Buffer for request SIOCGIWPRIV too small (16<88)                                                                    
I also tried to install the "driver" available here:

http://www.pulster.de/index.htm?sharp_zaur...00_zubehoer.htm

One has to modify the IPK, as a script inside looks for a C3000 or a C3100, but fails with a C3200. Afterwards, the card was not even switching its LED on.

If anyone had success, please post what you did to get it working.

Thanks,

  Torsten