1
Zaurus - pdaXrom / My Updated Beta3
« on: May 15, 2008, 11:15:31 pm »
Very google resouce, a lot of api need to be compiled again since gtk code has been upgrade.
Select language:
News:
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
3
Debian / [new] Kernel 2.6.24.4 With Cpufreq
« on: March 30, 2008, 03:26:38 am »
I have never seen a kernel 2.6 change cpu freq of zaurus very well. So we can not get any solution worked.
It is may the best way to reading the kernel 2.4's source related with VCORE and CCCR.
It is may the best way to reading the kernel 2.4's source related with VCORE and CCCR.
4
Debian / Dualbooting/multiplebooting With Kexec!
« on: March 28, 2008, 11:32:17 pm »
The updater.sh is not suitable for C1000. You may use attach file which come from angstrom.
After install and set nand access, it corrupted my pdaxii13 root file.
To ZDevil:
Could you paste the content include how to access NAND? I need this to remove those modules and package.
Really like kexec for pdaxrom, pdaxii13 is more suitable for daily use. Debian need more test and adjust now.
After install and set nand access, it corrupted my pdaxii13 root file.
To ZDevil:
Could you paste the content include how to access NAND? I need this to remove those modules and package.
Really like kexec for pdaxrom, pdaxii13 is more suitable for daily use. Debian need more test and adjust now.
5
Debian / [new] Kernel 2.6.24.4 With Cpufreq
« on: March 28, 2008, 03:31:04 am »
I am not sure the LCD Clock is related to Calibrating or not.
Since PXA270, we should change LCD Clock when cpu clock changed.
The following config is used in mb-applet-powerctrl. They are very stable stable in C1000, C3XXX.
[PXA270]
# do not change below
PathCCCR=/proc/zaurus/CCCR
PathVCORE=/proc/zaurus/VCORE
MaxFreq=5
DefaultFreq=3
#cpu clock, CCCR, VCORE
freq0=104,2000204,4,1
freq1=208,2000206,6,1
freq2=312,2000208,8,1
freq3=416,2000210,a,1
#2000210: CPU clock 416MHz system bus 208MHz LCD104MHz(default)
freq4=520,2000214,c,1
#freq4=520,2000290,c,1
#a000214: CPU clock 520MHz system bus 260MHz LCD130MHz
#2000290: CPU clock 520MHz system bus 208MHz LCD104MHz
#2000214: CPU clock 520MHz system bus 260MHz LCD 64MHz
freq5=624,2000218,e,1
#freq5=624,2000310,e,1
#a000218: CPU clock 624MHz system bus 312MHz LCD156MHz
#2000310: CPU clock 624MHz system bus 208MHz LCD104MHz
#2000218: CPU clock 624MHz system bus 312MHz LCD 78MHz
Since PXA270, we should change LCD Clock when cpu clock changed.
The following config is used in mb-applet-powerctrl. They are very stable stable in C1000, C3XXX.
[PXA270]
# do not change below
PathCCCR=/proc/zaurus/CCCR
PathVCORE=/proc/zaurus/VCORE
MaxFreq=5
DefaultFreq=3
#cpu clock, CCCR, VCORE
freq0=104,2000204,4,1
freq1=208,2000206,6,1
freq2=312,2000208,8,1
freq3=416,2000210,a,1
#2000210: CPU clock 416MHz system bus 208MHz LCD104MHz(default)
freq4=520,2000214,c,1
#freq4=520,2000290,c,1
#a000214: CPU clock 520MHz system bus 260MHz LCD130MHz
#2000290: CPU clock 520MHz system bus 208MHz LCD104MHz
#2000214: CPU clock 520MHz system bus 260MHz LCD 64MHz
freq5=624,2000218,e,1
#freq5=624,2000310,e,1
#a000218: CPU clock 624MHz system bus 312MHz LCD156MHz
#2000310: CPU clock 624MHz system bus 208MHz LCD104MHz
#2000218: CPU clock 624MHz system bus 312MHz LCD 78MHz
6
Debian / [new] Kernel 2.6.24.4 With Cpufreq
« on: March 28, 2008, 12:28:34 am »
After change cpu clock, dmesg shows:
Set frequeny to 62400 with L:16, 2N:6, B:1, Turbo Mode, A:1
Calibrating delay loop.. 622.59 BogoMIPS(lpj=3112960)
sharpsl-pm sharps-pm: Waring: Can not read main battery!
Problems:
1. Calibrate is not work since change cpu freq. I have to reboot to get it working again.
2. Battery status is wrong.
Sometimes I get message:
Unkwnon HZ value! (87) Assume 100.
Why?
Set frequeny to 62400 with L:16, 2N:6, B:1, Turbo Mode, A:1
Calibrating delay loop.. 622.59 BogoMIPS(lpj=3112960)
sharpsl-pm sharps-pm: Waring: Can not read main battery!
Problems:
1. Calibrate is not work since change cpu freq. I have to reboot to get it working again.
2. Battery status is wrong.
Sometimes I get message:
Unkwnon HZ value! (87) Assume 100.
Why?
8
Debian / [new] Kernel 2.6.24.4 With Cpufreq
« on: March 27, 2008, 04:14:07 am »Quote from: ZDevil
Now running this new kernel (hda1) with overclocking (416 mhz -> 624 mhz). Works great. Thank you!
Is it possible to down clocking? And how to change CPU clock?
9
Zaurus - pdaXrom / voice recorder for pdaxrom ?
« on: March 20, 2008, 11:29:50 am »
KHdRecord is good choice. You can find it in beat3 feed.
Have fun.
Have fun.
10
Zaurus - pdaXrom / Can Not Find Zgcc-3.4.6.squashfs For Pdaxii13v2?
« on: March 17, 2008, 02:58:57 am »
http://www.tyrannozaurus.com/feed/pdaXii13...-3.4.6.squashfs
is broken
Since move to pdaxii13v2, a lots of base environment like gtk and glib are upgraded. It is impossible to compile api by older zgcc.3.4.6.squashfs.
Chinese user have to upgrade to pdaxii13v2 because pdaxii13 do not open IM modules.
is broken
Since move to pdaxii13v2, a lots of base environment like gtk and glib are upgraded. It is impossible to compile api by older zgcc.3.4.6.squashfs.
Chinese user have to upgrade to pdaxii13v2 because pdaxii13 do not open IM modules.
11
Zaurus - pdaXrom / Pdaxng
« on: March 13, 2008, 02:49:42 am »
zaurus is total different with iphone.
iphone is modern, suitable for end user, supported by commercial company now.
As a linuxer, those advantages of iphone is not the whole world.
iphone is modern, suitable for end user, supported by commercial company now.
As a linuxer, those advantages of iphone is not the whole world.
12
Zaurus - pdaXrom / Capn_fish's Feed
« on: March 12, 2008, 11:14:23 pm »
SL-C3100 with custom Angstrom image
How about Angstrom image? Is it stable? Is it support CPU scaling?
How about Angstrom image? Is it stable? Is it support CPU scaling?
13
Zaurus - pdaXrom / Make Zimage Error In Sl-6000
« on: March 12, 2008, 01:19:12 am »
According to
http://digit.que.ne.jp/visit/index.cgi?Lin...A5%EB%2FSL-6000
2004-06-10 (Thu) 21:39:34 ぴろ : CONFIG_SL_CCCR_CHANGEとlogo_langを修整しただけのパッチを上げました。
2004-06-10 (Thu) 21:38:32 ぴろ : CONFIG_SL_CCCR_CHANGE等は、if式の']'の前にスペースをあけるのを忘れてました。'make xconfig'だといけるんだけど。あとコンフィグは、うちでやっていたのとほとんど変わらないです。なんで動いたり動かなかったりしたんだろ?
2004-06-10 (Thu) 16:16:34 てつ : ぴろさん、logo_langの件、了解しました。コンフィグは裏口に置いてある通りです。なぜかCONFIG_SL_CCCR_CHANGEとCONFIG_SL_CCCR242がyにできないです。
2004-06-09 (Wed) 22:48:24 ぴろ : logo_langの件は、tc6393fb.cの'extern int logo_lang = 0;'の'= 0'を削除すればOKです。修整していませんでした。>てつさん。あと、どのあたりのコンフィグいじると動くようになりましたか?
2004-06-09 (Wed) 22:37:38 てつ : ヤマケンさん、手が空いたらご協力をお願いします。6000も含めたソースの一本化はぜひ達成したいので。
2004-06-07 (Mon) 13:22:47 ヤマケン : てつさん、おつかれさまです。私も今手掛けてる仕事が落ち着いたら6000用のカーネルいじりを再開したいと思います。
It seems logo_lang is only the variable to select a language(english/jpn) when change CCCR or something else.
Is it possible to comment logo_lang in the functions which can not be compiled?
http://digit.que.ne.jp/visit/index.cgi?Lin...A5%EB%2FSL-6000
2004-06-10 (Thu) 21:39:34 ぴろ : CONFIG_SL_CCCR_CHANGEとlogo_langを修整しただけのパッチを上げました。
2004-06-10 (Thu) 21:38:32 ぴろ : CONFIG_SL_CCCR_CHANGE等は、if式の']'の前にスペースをあけるのを忘れてました。'make xconfig'だといけるんだけど。あとコンフィグは、うちでやっていたのとほとんど変わらないです。なんで動いたり動かなかったりしたんだろ?
2004-06-10 (Thu) 16:16:34 てつ : ぴろさん、logo_langの件、了解しました。コンフィグは裏口に置いてある通りです。なぜかCONFIG_SL_CCCR_CHANGEとCONFIG_SL_CCCR242がyにできないです。
2004-06-09 (Wed) 22:48:24 ぴろ : logo_langの件は、tc6393fb.cの'extern int logo_lang = 0;'の'= 0'を削除すればOKです。修整していませんでした。>てつさん。あと、どのあたりのコンフィグいじると動くようになりましたか?
2004-06-09 (Wed) 22:37:38 てつ : ヤマケンさん、手が空いたらご協力をお願いします。6000も含めたソースの一本化はぜひ達成したいので。
2004-06-07 (Mon) 13:22:47 ヤマケン : てつさん、おつかれさまです。私も今手掛けてる仕事が落ち着いたら6000用のカーネルいじりを再開したいと思います。
It seems logo_lang is only the variable to select a language(english/jpn) when change CCCR or something else.
Is it possible to comment logo_lang in the functions which can not be compiled?
15
Zaurus - pdaXrom / Pdaxng
« on: March 11, 2008, 12:57:41 am »
I need a stable kernel 2.6 and support zaurus' special functions, like speedstep, etc.
And a native compile.
And a native compile.