Messages

1

Off Topic forum / Play Your .ogg Files In Your Car!

« on: August 13, 2006, 02:43:41 pm »

Hi everyone.
I just bought a new JVC cd/reciever for my car, and I chose one that has USB port right on the face. This is nice, it will recognice flash drives up to 4GB.
Just for fun, I put one of my SD cards full of Zaurus .ogg files into the player and was very suprised to see that it recognises and plays these files! Now I won't have to maintain a seperate library of files for the Z, everyone can share!
JVC info and user manual lists only .mp3 and .wma as supported file types.
The model is KD-G820. There is a lower model that is the same except for the color display. Crutchfield offers this for 2 bills.
Enjoy.

2

Software / tkcjabber or Gaim

« on: February 26, 2004, 04:09:16 am »

Excellent.
I\'ll give it a try later this morning, let you know how it goes!
I think part of the problem was that I didn\'t uninstall the libpng before I tried the whole thing, I must have somehow missed that part.

Will let you know!

C

3

Software / Kismet

« on: February 26, 2004, 04:06:39 am »

Cool, thanks.
Maybe I\'ll try that too.  
Link didn\'t work, but if the page is called \'modules\', I\'ll find it!

C

4

Software / tkcjabber or Gaim

« on: February 25, 2004, 08:12:26 pm »

Hi again.
I checked over the libraries, and I found libpng12 was not installed, so I installed it (from the Gaim site feed) and now it starts again, but gives me other library errors. I think I amy be close, but...
Any idea where I can find a comprehensive list of libraries?
I\'m on my way to work, I\'ll post the error in case you see something obvious, I\'ll try to have a better look later tonight and see if I can figure out what i\'m missing, exactly.
I also got a file manager program working, that should help me figure out what the heck I\'m looking at!

bash-2.05$ gaim
plugins: probing /usr/lib/gaim/libgg.so
plugins: probing /usr/lib/gaim/libirc.so
plugins: probing /usr/lib/gaim/libjabber.so
plugins: probing /usr/lib/gaim/libmsn.so
plugins: probing /usr/lib/gaim/libnapster.so
plugins: probing /usr/lib/gaim/liboscar.so
plugins: probing /usr/lib/gaim/libyahoo.so
plugins: probing /usr/lib/gaim/ssl-gnutls.la
plugins: probing /usr/lib/gaim/ssl-gnutls.so
plugins: probing /usr/lib/gaim/ssl.la
plugins: probing /usr/lib/gaim/ssl.so
prefs: Reading /home/zaurus/.gaim/prefs.xml
prefs: Error reading prefs: Failed to open file \'/home/zaurus/.gaim/prefs.xml\': No such file or directory
accounts: Error reading accounts: Failed to open file \'/home/zaurus/.gaim/accounts.xml\': No such file or directory
pounces: Error reading pounces: Failed to open file \'/home/zaurus/.gaim/pounces.xml\': No such file or directory
libpng warning: Application was compiled with png.h from libpng-1.0.9
libpng warning: Application  is  running with png.c from libpng-1.2.5
libpng error: Incompatible libpng version in application and library
QPixmap::convertFromImage: Cannot convert a null image gaim
libpng warning: Application was compiled with png.h from libpng-1.0.9
libpng warning: Application  is  running with png.c from libpng-1.2.5
libpng error: Incompatible libpng version in application and library


 (repeated many times,I removed most of thenm, same error)



libpng error: Incompatible libpng version in application and library
QPixmap::convertFromImage: Cannot convert a null image gaim
Can\'t make QGfx for null pixmap

Unable to get graphics context
Can\'t make QGfx for null pixmap

Unable to get graphics context
QPaintDevice: Cannot destroy paint device that is being painted
QPaintDevice: Cannot destroy paint device that is being painted
Can\'t make QGfx for null pixmap

Unable to get graphics context
Can\'t make QGfx for null pixmap

Unable to get graphics context
QPaintDevice: Cannot destroy paint device that is being painted
QPaintDevice: Cannot destroy paint device that is being painted
Can\'t make QGfx for null pixmap

Unable to get graphics context
Can\'t make QGfx for null pixmap

Unable to get graphics context
QPaintDevice: Cannot destroy paint device that
is being painted
Can\'t make QGfx for null pixmap
 
Unable to get graphics context
Can\'t make QGfx for null pixmap
 
Unable to get graphics context
QPaintDevice: Cannot destroy paint device that
is being painted
QPaintDevice: Cannot destroy paint device that
is being painted
Can\'t make QGfx for null pixmap
 
Unable to get graphics context
Can\'t make QGfx for null pixmap
 
Unable to get graphics context
QPaintDevice: Cannot destroy paint device that
is being painted

5

Software / Kismet

« on: February 25, 2004, 04:19:25 pm »

where do you find 3.13, and did your other stuff still work OK?
how about all your PIMs?

I\'m trying to decide what i should do, maybe upgrade too.

C

6

Accessories / Cheapest CompactFlash SD cards?

« on: February 25, 2004, 01:05:06 pm »

http://www.tigerdirect.com/applications/Ca...egory_flash.asp

Tiger ships to GB, and while I don\'t know the shipping charges, I do know their prices are pretty good. Prices with an asterisk are after a rebate.
I have a Dane-elec CF 256, which has prooved reliable so far, and is very quick.

Here is a link to their info page for international orders.
http://www.tigerdirect.com/sectors/Help/in...national.asp#i3

with +/- $1.85/ one british pound, you should be able to do pretty well, even with extra shipping costs.

Good luck!
C

7

Software / tkcjabber or Gaim

« on: February 24, 2004, 08:07:43 pm »

I\'ll have to go look, I\'ll let you know later.
(I have to go work for a few hours)

I have Sharp 3.1 ROM

I figured the colors were different file types, but how to know what\'s what?

Thanks again!
C

8

Software / Kismet

« on: February 24, 2004, 08:05:34 pm »

Yes, I was running it as root.

I don\'t know what loopback device you mean...is it software?

THanks!

C

9

Software / tkcjabber or Gaim

« on: February 23, 2004, 06:12:54 pm »

Well, I have a yahoo account, I\'ll try this later (probably tomorrow) and let you know if that part will work.
I dunno about MSN, I think that requires a few other packages and stuff for their security options, and I don\'t have an account with them to try.
I wonder if I should select all the modules, not just the oscar and yahoo ones?
I\'ll try it the short route first, I can always start over again

10

General Discussion / Can anyone point me in the right direction?

« on: February 23, 2004, 06:09:01 pm »

What a blast! I used to have a Bronco for work, and while getting to remote sites I\'d try to find the nearly impossible route. Lots of fun in deep snow with tire chains! I do my personal offroading on 2 wheels...with a BIG motor.

I\'ll have to go find your site an check out the pictures...


Thanks again for the great work here, I\'d be completely lost without everyone here.

I\'ve got to run, though...I\'ve spent too much time in here, I\'m gonna get in big trouble if my dinner gets cold again tonight!

11

Software / tkcjabber or Gaim

« on: February 23, 2004, 05:46:30 pm »

Thanks!
do you know if I should go (re)install all the packages for Gaim before doing that, or after?
I\'ll let you know how I make out, THanks for the help!
(I have to run now, if my dinner gets cold again, I\'ll be in real trouble!)

C

12

General Discussion / Can anyone point me in the right direction?

« on: February 23, 2004, 05:42:42 pm »

Offroadgeek- I took your advice on the socket ethernet card, found it cheap ($45 incl. shipping), works great! I\'ve also gotten a symbol spectrum 24 wireless ethernet card, that works fine too, except for Kismet/wellenreiter,but that\'s another story.

I\'m using the laterst Sharp ROM, and the nice thing is the backup to PC utility that I upgraded along with it. Now I have good backups in case a screw anything up. (only had to use it once)

I\'ve been messing with the terminal (console) and I\'ve really come a long way...Thanks to you and everyone here.

I have a few (slightly more educated) questions, though..maybe someone can help?

Can you restore just one part of a backup (like entries from your calendar)? and if so, how?
If I were to go to OZ, would the Sharp backup utility and file xfer work?
Is there anywhere I could find a file tree other than just stumbling around in the console?
when you\'re in the terminal, some files are colored differently. Any idea what that means?
What does one do when an application requires an executable .jar file. I transferred the file to the Z and I can see it in the GIU, but I can\'t do anything with it, and I can\'t find it from the terminal. (this is for Qtjim)
Is there a specific directory where the files you place in internal memory wind up? how about for a CF or SD card? I tried finding properties for these things by holding the stylus on them (in the \'files\' tab of the GUI), but there\'s no file or location info.

Thanks in advance...
Oh, offroad geek again, are you really an offroader?

C

13

Software / tkcjabber or Gaim

« on: February 23, 2004, 05:03:59 pm »

I\'ve uninstalled Gaim, and tried the qtjim, but I can\'t figure out how to install or execute the .jar file.

Here is what was ahppening with Gaim, maybe I can go back and try it again if anyone has any idea what I was missing..

# ln -s /home/QtPalmtop/lib/libqte.so.2.3.2 /usr/lib/libpng12.so.0
ln: /usr/lib/libpng12.so.0: File exists
# gaim
gaim: error while loading shared libraries: libopie.so.1: cannot load shared object file: No such file or directory    

Thanks,

C

14

Software / Kismet

« on: February 23, 2004, 04:57:30 pm »

Hi.
I\'ve followed the above, and I was getting the same \'can\'t connect to server error.
I then ran kismet_server from the # prompt, and now it *looks* like something is happeneing, but it still doesn\'t find anything. I have an access point right here.
I have the laterst Sharp ROM (3.1) and a Symbol spectrum 24 wireless ethernet card.
I have tried mounting and unmounting the card, and also tried all the setting for different cards in the config menu of the kismet GIU.

Below is what printed to the console after I started kismet from the prompt, and below that  is what happened when i entered the command kismet_server from root:
bash-2.05$ kismet
Server options:  none
Client options:  none
Starting server...
Suid priv-dropping disabled.  This may not be secure.
No enable sources specified, all sources will be enabled.
Source 0 (Kismet): Using prism2 to capture packets.
FATAL: Source 0 (Kismet): Prism2 open bind() failed. (Operation not permitted)
Starting UI...
NOTICE: configdir \'/home/root/.kismet/\' does not exist, making it.
FATAL:  Could not make configdir: Permission denied
Killing server...
kill: 11743: No such process
wait: No such job: %-
Terminating...
Done.  Run kismet_unmonitor or eject and re-insert your card (or restart your
 pcmcia services) to return your card to normal operation.
bash-2.05$ kismet
Server options:  none
Client options:  none
Starting server...
Suid priv-dropping disabled.  This may not be secure.
No enable sources specified, all sources will be enabled.
Source 0 (Kismet): Using prism2 to capture packets.
FATAL: Source 0 (Kismet): Prism2 open bind() failed. (Operation not permitted)
Starting UI...
NOTICE: configdir \'/home/root/.kismet/\' does not exist, making it.
FATAL:  Could not make configdir: Permission denied
Killing server...
kill: 11792: No such process
wait: No such job: %-
Terminating...
Done.  Run kismet_unmonitor or eject and re-insert your card (or restart your
 pcmcia services) to return your card to normal operation.
bash-2.05$ kismet_unmonitor
Using /usr/etc/kismet.conf sources...
Disabling monitor mode for a prism2 card on eth0
SIOCSIFFLAGS: Permission denied
SIOCSIFFLAGS: Permission denied
wlanctl-ng: No such device
You will likely need to restart your PCMCIA services to reconfigure your card
for the correct channel and SSID.
bash-2.05$ kismet
Server options:  none
Client options:  none
Starting server...
Suid priv-dropping disabled.  This may not be secure.
No enable sources specified, all sources will be enabled.
Source 0 (Kismet): Using prism2 to capture packets.
FATAL: Source 0 (Kismet): Prism2 open bind() failed. (Operation not permitted)
Starting UI...
NOTICE: configdir \'/home/root/.kismet/\' does not exist, making it.
FATAL:  Could not make configdir: Permission denied
Killing server...
kill: 12077: No such process
wait: No such job: %-
Terminating...
Done.  Run kismet_unmonitor or eject and re-insert your card (or restart your
 pcmcia services) to return your card to normal operation.
bash-2.05$  




# kismet-server
kismet-server: not found
# kismet_server
Suid priv-dropping disabled.  This may not be secure.
No enable sources specified, all sources will be enabled.
Source 0 (Kismet): Using prism2 to capture packets.
Allowing clients to fetch WEP keys.
configdir \'/home/root/.kismet/\' does not exist, making it.
SSID cloak file did not exist, it will be created.
IP track file did not exist, it will be created.
Logging networks to Kismet-Feb-23-2004-1.network
Logging networks in CSV format to Kismet-Feb-23-2004-1.csv
Logging networks in XML format to Kismet-Feb-23-2004-1.xml
Logging cryptographically weak packets to Kismet-Feb-23-2004-1.weak
Logging cisco product information to Kismet-Feb-23-2004-1.cisco
Logging gps coordinates to Kismet-Feb-23-2004-1.gps
Logging data to Kismet-Feb-23-2004-1.dump
Writing data files to disk every 300 seconds.
Filtering beacon packets.
Filtering PHY layer packets.
Reading AP manufacturer data and defaults from
/usr/etc/ap_manuf
Reading client manufacturer data and defaults from /usr/etc/client_manuf
Dump file format: wiretap (local code) dump
Crypt file format: airsnort (weak packet) dump
Kismet 2.8.1 (Kismet)
Source 0 (Kismet): Capturing packets from Prism/2 (DEPRECATED)
Logging data networks CSV XML weak cisco
Listening on port 2501.
Allowing connections from 127.0.0.1/255.255.255.255
Registering builtin client/server protocols...
Accepted interface connection from 127.0.0.1



I tried allowing my access point to broadcase the SSID, but no change. I get email and card lights flashing, but no networks are detected. Any  ideas?

15

Software / tkcjabber or Gaim

« on: February 22, 2004, 11:38:00 pm »

Anyone ever try qtjim?

I tried to get gaim working following the info here, and still no icons. I have made a text file of the reply to the  -s command, and the error message when running from the console, but i can\'t figure out how to paste it into a message from the Z!

qtjim\'s .ipk needs a .jar file. The creator gives a command to install it, but no go.

Anyone have any ideas?