Messages

1

Angstrom & OpenZaurus / Angstrom And Dm9601 Module

« on: January 16, 2008, 10:28:24 am »

Thanx a lot Capn_Fish!
However the ipk cannot be installed with ipkg, but after manual installation (ar -x ..., cp dm9601 ... , depmod) the module just works!
I tested it on SL-C1000 and SL-C3200, Angstrom 2007.12, kernel 2.6.23,
and some noname usb dongle (costs ~15E)
lsusb says:
[div class=\'codetop\']CODE[/div][div class=\'codemain\' style=\'height:200px;white-space:pre;overflow:auto\']
  idVendor           0x0a46 Davicom Semiconductor, Inc.
  idProduct          0x9601
  bcdDevice            1.01
  iManufacturer           1 DM9601 USB NNC  
  iProduct                2 Davicom CO., LTD        
  iSerial                 3 9601
  bNumConfigurations      1
[/div]

2

Angstrom & OpenZaurus / Angstrom And Dm9601 Module

« on: January 15, 2008, 08:45:10 am »

I now have a DM9601 Spitz module, if somebody's interested.

Hey, Capn_Fish, i'd like to test this module on my Z. Could you publish it?

3

C1000/3x00 Hardware / Usb Ethernet For C1000/cacko1.23?

« on: October 17, 2007, 11:59:41 am »

Hi Folks!

I've tested these myself:
D-Link  DUB-E100  
LinkSys  USB200M  
They both work with Cacko, plug-n-play.

Bad news (at least for me).
I've  just bought a Z SL-C3200 and D-Link DUB-E100  (H/W Ver.:B1) and tried both with Cacko 1.23.
I use the usb-network-modules-2.4.20_arm.ipk provided by the original cacko feed and the eth adaptor isn't recognized.
dmesg says:

[div class=\'codetop\']CODE[/div][div class=\'codemain\' style=\'height:200px;white-space:pre;overflow:auto\']
usbh: hotplug_schedule_bh: schedule bh
hotplug_schedule_bh: schedule bh
usbh: hotplug_bh:
usbh: udc_connected: ACTIVE_LOW: 1<7>usbh: monitor_connected: 1
usbh: monitor_restore: RESTORE_LOADED
usbh: monitor_hotplug: agent: usbh interface: monitor action: restore-loaded
new hp status=0
hotplug_bh:
monitor_connected: 1
monitor_restore: RESTORE_LOADED
monitor_hotplug: agent: usbd interface: monitor action: restore-loaded
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usbdcore: usbdcore 0.1 035 2002-06-12 20:00 (dbg="")
usb-ohci.c: USB OHCI at membase 0xfe000000, IRQ 3
net_fd 0.1 035 2002-06-12 20:00 (dbg="",alwaysup=0,OUT=64,IN=64)
vendorID: 4dd productID: 9031
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
pxa27x_bi 0.1-alpha 035 2002-06-12 20:00 (dbg="")
bi_modinit: call udc_startup_events
bi_device_event: call udc_enable
bi_device_event: call udc_all_interrupts
udc_connect: host cable connected.
hub.c: new USB device -2, assigned address 2
usb.c: USB device 2 (vend/prod 0x2001/0x3c05) is not claimed by any active driver.
[/div]

Somewhere in the Linux forum I read, that support for the B1 HW version of the adapter was added to the asix minidriver in 2006, so I tried to find a newer version, but I didn't succeed.
Do you have any idea what can I do in order to make the adapter work with my Cacko powered Z?


Thanks in advance