Messages

1

Cxx0 Hardware / Zaurus won\'t start

« on: May 25, 2004, 04:54:40 am »

Hi!

Well, while trying to get my bluetooth card running (which I managed with a lot of help from this board) I accidently got my leg entangled in the power cord and taught my zaurus to fly... which it did very well I have to admit... just the landing was a bit rough.... well ok, it crashed into the wall and fell to the floor... We\'ll have to work on that .

The thing is it won\'t start anymore. I managed to start it right after the crash and then a bit later: nothing.... only when I attached the power cord again it booted... but it doesn\'t seem to be just the battery or anything because even with the cord I couldn\'t get it to start ever since.

I opened the thing to see if anything was obviously damaged. Without result... I didn\'t find anything.

Has anyone here had a similar problem or knows what I could try?

2

Cxx0 General discussions / Problems installing Bluetooth

« on: May 13, 2004, 06:23:43 am »

Heureka it works! I\'ve got Internet! The only strange thing is that over Bluetooth I cannot reach google... it always redirects me to the zaurus homepage. Is that probably a wrong hosts entry? Which would be strange since it works normally over LAN.

3

Cxx0 General discussions / Problems installing Bluetooth

« on: May 13, 2004, 05:42:57 am »

tumnus: You were right one zero was missing in my number... so as soon as I can start another try we\'ll see if it works... I\'d just like to know why it only worked once.

4

Cxx0 General discussions / Problems installing Bluetooth

« on: May 13, 2004, 05:13:40 am »

OK I\'ll look into that... even though it should be the right number... anyway what I don\'t quite understand is why it worked only once. All I get now is an

alarm

and a

 -- write timed out

5

Cxx0 General discussions / Problems installing Bluetooth

« on: May 13, 2004, 03:14:22 am »

Heureka I say! The Phone tried to connect! Well, only for half a second but it tried!  I\'ll post the log

May 12 08:55:47 localhost pppd[453]: pppd 2.4.0 started by root, uid 0
May 12 08:55:51 localhost chat[464]: abort on (NO CARRIER)
May 12 08:55:51 localhost chat[464]: abort on (NO DIALTONE)
May 12 08:55:51 localhost chat[464]: abort on (BUSY)
May 12 08:55:51 localhost chat[464]: send (AT+CBST=80,0,1;+CHSN=4,2,0,12^M)
May 12 08:55:51 localhost chat[464]: expect (OK)
May 12 08:55:52 localhost chat[464]: AT+CBST=80,0,1;+CHSN=4,2,0,12^M^M
May 12 08:55:52 localhost chat[464]: OK
May 12 08:55:52 localhost chat[464]:  -- got it
May 12 08:55:52 localhost chat[464]: send (ATDT107410840840222^M)
May 12 08:55:52 localhost chat[464]: expect (CONNECT)
May 12 08:55:52 localhost chat[464]: ^M
May 12 08:55:56 localhost chat[464]: ATDT107410840840222^M^M
May 12 08:55:56 localhost chat[464]: NO CARRIER
May 12 08:55:56 localhost chat[464]:  -- failed
May 12 08:55:56 localhost chat[464]: Failed (NO CARRIER)
May 12 08:55:56 localhost pppd[453]: Connect script failed
May 12 08:55:57 localhost pppd[453]: Exit.    

This is the actal log file though I have to say I couldn\'t connect a second time yet.

6

Cxx0 General discussions / Problems installing Bluetooth

« on: May 13, 2004, 02:44:32 am »

OK we don\'t have to worry about Bluetooth anymore... I just killed my little Zaurus after just one week... how that god damned power cord managed to sling itself around my foot I\'ll never know... What I do know is is that the ppor thing flew across the room and crashed against floor and wall.

Interesting about it though is that it still worked fine than... but today I tried to turn it on... nothing. It\'s just that... I curse my luck...

OK forget about that, now it works again.... I just don\'t know why.

7

Cxx0 General discussions / Problems installing Bluetooth

« on: May 11, 2004, 08:44:44 am »

Brightness, good idea... the battery should be new though... I\'ll try it.

I\'ll give you an update as soon as I have the power supply handy.

8

Cxx0 General discussions / Problems installing Bluetooth

« on: May 11, 2004, 04:26:06 am »

I found the string for a T68 but since the other phones all use the same strings I thought I\'d just try it... but now my battery is low... cool... I\'ve been charging it for about a day and all I get is 30 to 60 minutes battery life... is that normal?

9

Cxx0 General discussions / Problems installing Bluetooth

« on: May 11, 2004, 03:47:21 am »

OK so that means some googling for that init string, right?

10

Cxx0 General discussions / Problems installing Bluetooth

« on: May 11, 2004, 02:19:11 am »

Well the whole file lloks as follows:

/dev/rfcomm0
debug
noipdefault
115200
connect \'/usr/sbin/chat -s -v -t 60 ABORT \"NO CARRIER\" ABORT \"NO DIALTONE\" ABORT \"BUSY\" \"\" \"ATQ0V1S100=1\" OK \"ATDT0844844222\" CONNECT \"¥¥d¥¥d\"\'
crtscts
lock
modem
user \"xxxxxxxx\"
usepeerdns
defaultroute
mtu 576
mru 576
connect -delay 1000
remotename IRDA1084202939

That\'s it... the connect string looked like this before:

connect \'/usr/sbin/chat -s -v -t 60 ABORT \"NO CARRIER\" ABORT \"NO DIALTONE\" ABORT \"BUSY\" \"\" \"ATZ\" OK \"ATQ0V1S100=1\" OK \"ATDT0844844222\" CONNECT \"¥¥d¥¥d\"\'

Oh yeah BTW I\'m having the problem that this file is always reset, when I go in suspend mode... at least that seems to be the cause... how can I permanently change that file?

11

Cxx0 General discussions / Problems installing Bluetooth

« on: May 10, 2004, 11:53:35 am »

Is your phone indicating that the Bluetooth connection has been established? I wouldn\'t expect it to get to the chatscript if the connection to your phone was not established, so it looks like it could be a phone initialisation/network account setup issue.

What is the modem init string that you are using?

The other output you can look at is from the command (run as root)

pppd call <your peers filename goes here> -detach

e.g. pppd call DialupIrDA547634967397 -detach

The entire pppd log will then be printed to the Zaurus screen.

BTW the only thing that is returned is ATZ.

12

Cxx0 General discussions / Problems installing Bluetooth

« on: May 10, 2004, 11:52:38 am »

Where would I find this modem init string?

13

Cxx0 General discussions / Problems installing Bluetooth

« on: May 10, 2004, 10:29:19 am »

May 10 16:49:43 localhost pppd[577]: pppd 2.4.0 started by root, uid 0
May 10 16:12:00 localhost chat[583]: abort on (NO CARRIER)
May 10 16:12:00 localhost chat[583]: abort on (NO DIALTONE)
May 10 16:12:00 localhost chat[583]: abort on (BUSY)
May 10 16:12:00 localhost chat[583]: send (ATDT107410844844222^M)
May 10 16:12:00 localhost chat[583]: expect (CONNECT)
May 10 16:12:00 localhost chat[583]: ATDT107410844844222^M^M
May 10 16:12:00 localhost chat[583]: NO CARRIER
May 10 16:12:00 localhost chat[583]:  -- failed
May 10 16:12:00 localhost chat[583]: Failed (NO CARRIER)
May 10 16:13:00 localhost pppd[577]: Connect script failed
May 10 16:13:01 localhost pppd[577]: Exit.

Thats the new output.

14

Cxx0 General discussions / Problems installing Bluetooth

« on: May 10, 2004, 03:38:59 am »

It still doesn\'t work. Isn\'t there anybody who had the same problem?

15

Cxx0 General discussions / Problems installing Bluetooth

« on: May 07, 2004, 01:23:51 pm »

May  7 16:49:43 localhost pppd[3701]: pppd 2.4.0 started by root, uid 0
May  7 16:12:00 localhost chat[3703]: abort on (NO CARRIER)
May  7 16:12:00 localhost chat[3703]: abort on (NO DIALTONE)
May  7 16:12:00 localhost chat[3703]: abort on (BUSY)
May  7 16:12:00 localhost chat[3703]: send (ATDT107410844844222^M)
May  7 16:12:00 localhost chat[3703]: expect (CONNECT)
May  7 16:13:00 localhost chat[3703]: alarm
May  7 16:13:00 localhost chat[3703]: Failed
May  7 16:13:00 localhost pppd[3701]: Connect script failed
May  7 16:13:01 localhost pppd[3701]: Exit.