Messages

1

Angstrom & OpenZaurus / Java For Oz 3.5.2

« on: December 26, 2004, 07:33:22 am »

Hi,

I have installed jeode on my (standard) openzaurus rom 3.5.2. The only thing "odd" is that you have to tell the libcompat layout the evm executable needs to be "emulated".
I cannot remember installing anything else for this rom.

Maybe there is a difference in default installation between hentges and the default one?

2

5x00 General discussions / Help - Bricked Sl5000d ??

« on: December 09, 2004, 08:16:40 am »

When my 5000D died after an incorrect flash. I removed the battery (and of course the power) for half a day orso. After putting back the battery and powerplug I was able to flash it again with a correct rom this time

This happened a long time ago though.. So I can't remember what I did wrong to freeze my zaurus.

3

Angstrom & OpenZaurus / Oz 3.5.2 Coming Any Minute Now.

« on: December 01, 2004, 12:33:34 pm »

We forgot to add the devel feed to the default ipkg.conf. libstdc++6 is in there - just add the feed.

that worked .. thanks...

I noticed in the opie installer that sometimes linking does not work (when I install a package on my sd card).
reinstalling this package somethis does the trick. Is this a known issue?

4

Angstrom & OpenZaurus / Oz 3.5.2 Coming Any Minute Now.

« on: December 01, 2004, 07:47:04 am »

Hi,

I must say I am really impressed by this new version. I was a bit afraid to try 3.5.1 so I thought to give 3.5.2 a change. Networking and installation does not seem to be a problem.
Except one thing. When I try to install libmicrokcal it complains that it cannot find libstdc++6 (>=3.4.2).
Anyone have a clue?
Thanks

5

Software / KDE-Pim/Pi 1.9.6 Release

« on: October 06, 2004, 05:40:06 am »

Since the latest version (1.9.6) I am having troubles importing birthdays.
I tried to run kopi from the konsole to see if there are any error messages diplayed. but I could not find one.

The problem is that birthdays I enter in the addressbook just do not appear in kopi.
Is anyone else having the same problems? Or is it just a wierd setting on my side?

PS: the dialog that asks if I want to import birthdays appears. And after that .... nothing

Thanks

I am sorry , that I did not mention it:

We have changed the internal application communication and import birtdays is not yet implemented again.

z.

Well.. that explains a lot

Any ideas on when this feature will be reintroduced?

Thanks

6

Software / KDE-Pim/Pi 1.9.6 Release

« on: October 06, 2004, 03:12:17 am »

Since the latest version (1.9.6) I am having troubles importing birthdays.
I tried to run kopi from the konsole to see if there are any error messages diplayed. but I could not find one.

The problem is that birthdays I enter in the addressbook just do not appear in kopi.
Is anyone else having the same problems? Or is it just a wierd setting on my side?

PS: the dialog that asks if I want to import birthdays appears. And after that .... nothing

Thanks

7

Software / KDE-Pim/Pi 1.9.6 Release

« on: September 22, 2004, 06:24:37 am »

OZ 3.5.1 contain KDEPIM/PI in version 1.9.5 - kopi, kapi, kopi-applet are packaged:

Cool!
Since this application made my zaurus usable for the firsttime, I might think about upgrading OZ.

It would be nice if version 1.9.6 will become available though since it supports addressbook syncing.

Thanks

8

Software / KDE-Pim/Pi 1.9.6 Release

« on: September 22, 2004, 04:26:50 am »

I have a Zaurus 5000D with the full kdepim/pi stuff installed on SD card. Otherwise I have not enough space/memory left. The 5000D is the smallest zaurus available memory wise that is.

So far I have no problems running it from SD using OZ 3.3.5.
(Wondering though if this package will work on OZ 3.5.1)

9

Software / KDE-Pim/Pi 1.9.6 Release

« on: September 22, 2004, 02:17:04 am »

The bug I previously encountered where re-opening closed TODOs caused a crash has been fixed! Yay!. However, since I've got "fastload" on for KO/PI, I've now got no way of closing it down. Which is very irritating when I've changed a config setting that requires a restart... (I have to kill the kopi process; choosing "Save&Exit" only does the save part of the equation and hides the app...
Too early to say for sure, but it does look like it's still fairly memory-hungry...

Disabeling fastload should "unload" that specific program. So that might be a solution you can try..

10

Software / KDE-Pim/Pi 1.9.6 Release

« on: September 21, 2004, 09:46:30 am »

Kopi has syncing available over ssh (as wel as ka/pi has).

Select remote file  in the profile kind groupbox (go to synchronization preferences).
Than you can select scp/ftp to use syncing.
You need to add the public key of your zaurus to the machine you are syncing with.
And as far as I can tell you can only start syncing on the zaurus.

I really would like a way to start that from my desktop machine since navigation on that one is a lot easier

Hope this helps..

11

Software / KDE-Pim/Pi 1.9.6 Release

« on: September 21, 2004, 09:04:41 am »

COOL!

Thanks for this new version.

So far something that would be nice is that addressbook would (just like korganizer) have a filter (default) to disable showing the sync events. Now every user has to do that for himself.

Anothing this is after pressing edit categories in kaddressbook (through edit contact) the previous selection of categories is lost.

Furthermore I have to say I am very pleased with this realease..

Thanks

12

Software / KDE-Pim/Pi 1.9.4 Release

« on: September 20, 2004, 10:27:18 am »

Hi,

I was wondering (since I finally am able to use the USB networking) if it is possible to start the the sync through a command line. This way it would be possible to just place the zaurus in my cradle to sync my calendar stuff.

Thanks,
One happy zaurus user

13

Software / KDE-Pim/Pi 1.9.4 Release

« on: September 17, 2004, 02:27:07 am »

When a add an entry to my korganizer on my kde desktop machine (using kde version 3.3) and sync with ko/pi I seem to loose this newly added entry.

Is this a known problem or am I doing something wrong here?

Hmmm.. I am the one to blame here. I made a typo in the scp command from my desktop to my zaurus

But can it be a good idea to use the following fields:
desktop location (textfield, for example: /home/zaurususer/.kde/share/apps/korganizer/std.ics)
zaurus location: (textfield, for example /tmp/mycalendar.ics)
user: (textfield, for example zaurususer)
type: ftp/scp (radiobutton?)

This way it is a lot easier to configure imho.

Please let me know what you think.

14

Software / KDE-Pim/Pi 1.9.4 Release

« on: September 16, 2004, 04:33:59 am »

Hi,

I am currently using 1.9.5. version (not the updated ones... sorry cannot seem to keep up with them  ) And I have a question about syncing ko/pi.
When a add an entry to my korganizer on my kde desktop machine (using kde version 3.3) and sync with ko/pi I seem to loose this newly added entry.

Is this a known problem or am I doing something wrong here?

Thanks for your help...

15

Software / KDE-Pim/Pi 1.9.4 Release

« on: September 15, 2004, 02:59:56 am »

Hi,

About configuration settings saving in ka/pi. I noticed it only is saving the changes when pressing the OK button in the lower left of the screen.
So NOT the one in the top right that is part of the windowing system.

Please verify so that zautrix is able to fix this...

Everything else seems ok.. except maybe a small translation error?
In ka/pi it says emport (instead of export?).

Thanks for this new version though!

-Roy


edited:... of course the button is on the lower left on the screen  duh...