Messages

1

C1000/3x00 General discussions / Kino2 And Subtitles

« on: April 11, 2006, 07:23:43 pm »

Hi everybody,

I've got a c1000 for quite some time and recently I rediscovered it thanks to cresho's tutorial on how to play movies.

Now I make them with nero recode and they play amazingly well on my zaurus.
There's only one thing that bugs me it's that I don't know how to play subtitles that are in a .srt file with kino2.

Does somebody know how to do this?

edit: My bad, the file was a weird .sub where the subtitles are pictures so mplayer wouldn't even play it on my computer.
I'll try with a srt file.

2

C1000/3x00 General discussions / C1000 Windows Drivers, Please

« on: August 16, 2005, 04:13:09 pm »

Hi,

Here we go.
Unzip the attachement and follow these instructions thanks to Trisoft.
Of course you have to point Windows to the folder containing the drivers.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=91725\"][{POST_SNAPBACK}][/a][/div]

Thanks a lot everything is working now I can map my zaurus with xp as  a network drive and see both sd and cf card at once.

 

3

C1000/3x00 General discussions / C1000 Windows Drivers, Please

« on: August 13, 2005, 10:57:43 am »

Hi,

Could someone post the windows drivers for the SL-C1000 please I can't find my cd anywhere.  

I went on the Conics site but couldn't find the drivers or image cd.  

Thanks

4

C1000/3x00 General discussions / Nand Restore On C1000 With Sd

« on: August 10, 2005, 05:10:42 am »

If you have the CF card in the slot when attempting to do a NAND backup it will try to use that first.

If you want to use SD make sure the CF card is not in the zaurus

Stu
[div align=\"right\"][a href=\"index.php?act=findpost&pid=91342\"][{POST_SNAPBACK}][/a][/div]

Thanks I tried and it worked just well. At the beginning it wouldn't recognize the sd card but it was because the sd was formatted in FAT32 instead of FAT.
Anyway thank you all again.

5

C1000/3x00 General discussions / A Kernel With Everything

« on: August 10, 2005, 05:08:15 am »

Hey gjarboni,

the patching that you've done is it the same as tetsu's v18a kernel for c3000 ?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=82235\"][{POST_SNAPBACK}][/a][/div]

The last patch that I applied was this one: P16-key-chattering-fix_041226.patch. I don't remember Tetsu's version numbering for sure, but I think I am current through v17f or v17g.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=82296\"][{POST_SNAPBACK}][/a][/div]

Does your kernel work with C1000?

6

C1000/3x00 General discussions / Nand Restore On C1000 With Sd

« on: August 09, 2005, 03:54:11 pm »

Can you make a NAND restore from a SD card on the zaurus C1000?
I  only have a 128 MB cf card so I can't do it with a cf.

7

Zaurus - pdaXrom / Rc10 Out For Testing..

« on: July 21, 2005, 06:00:12 am »

Hi, I just installed RC10 Akita on my C1000 and I have come to this several bugs:

- I don't know why but each time the zaurus suspend the clock settings I have goes wrong when I return from suspend mode,

This is a problem related to the hardware clock not getting synchronised with the system clock during a suspend (or in fact ever) and also affects OpenZaurus (which I've just switched back from again ).

My solution was simply to set the hardware clock to the correct time with:

  # hwclock --systohc

however if you are using an ntp source then this needs to be done before every suspend to keep the clock accurate.

You can modify /usr/bin/apm to set the hardware clock before each suspend.  It also fixes the problem where Matchbox/Openbox can freeze after resuming due to the time shift.  See my post here: https://www.oesf.org/forums/index.php?showt...indpost&p=88799
[div align=\"right\"][a href=\"index.php?act=findpost&pid=88896\"][{POST_SNAPBACK}][/a][/div]

Thanks, JAm13's solution worked perfectly and as he said my portrait mode problem solved itself after a while so the only remaining problem is to connect my zaurus to the net via my usb-ethernet adaptater.
 I installed the driver for it but now I don't what I should do now to make it work.

Also I tried to compile the flac plug-in for Xmms on my Fedora core 4, but it won't compile it if I don't have xmms installed. So I tried to compile Xmms and it said that I don't have Glib installed but I have the glib 2.0 installed I just don't have the glib-config file. Any ideas?
The flac encoder and decoder compiled well but  the plug-in just won't compile.

8

Zaurus - pdaXrom / Rc10 Out For Testing..

« on: July 20, 2005, 02:33:29 am »

This is a problem related to the hardware clock not getting synchronised with the system clock during a suspend (or in fact ever) and also affects OpenZaurus (which I've just switched back from again ).

My solution was simply to set the hardware clock to the correct time with:

  # hwclock --systohc

however if you are using an ntp source then this needs to be done before every suspend to keep the clock accurate.

- I didn't manage to make my usblan to work I've got one with the Rtl8150 chip, the device lights are on which I suppose is a good thing but I can't ping to my router.
I've entered all the good settings in usb and in lan & wifi in system tools

I couldn't get the USB to operate in anything apart from host mode when I last used pdaXrom, which was one of the reasons I gave OpenZaurus another go.

If someone has a fix for this I'd like to hear it!
[div align=\"right\"][a href=\"index.php?act=findpost&pid=88806\"][{POST_SNAPBACK}][/a][/div]

???Ah ok, I don't think it's the same problem.
 I want to use usb host to plug a usb-ethernet device, I don't want to use the usb-pc connection to act as a bridge.
For your problem, did you try to desactivate the usb host module (as in OZ 3.5.3 perhaps usb_ohci_pxa270)?

9

Zaurus - pdaXrom / Rc10 Out For Testing..

« on: July 19, 2005, 04:25:47 am »

Hi, I just installed RC10 Akita on my C1000 and I have come to this several bugs:

- I don't know why but each time the zaurus suspend the clock settings I have goes wrong when I return from suspend mode,

- I don't know if it's normal but I can't go into portrait mode

- I didn't manage to make my usblan to work I've got one with the Rtl8150 chip, the device lights are on which I suppose is a good thing but I can't ping to my router.
I've entered all the good settings in usb and in lan & wifi in system tools

apart from that it's working great, thanks for this release, so far it beats (for me) the sharp rom or OZ in terms of look, feeling and overall working apps.

10

Zaurus - pdaXrom / Video On C1000?

« on: July 18, 2005, 08:28:18 am »

Hi, I have  just installed pdaxrom RC10 today. And I must say it's really great. I love the look and the feeling of this rom!

Now my problem is to play videos on it. I have installed vlc and Mplayer but each time I try to launch the app it crash looking for shared librairie: libavformat.so.

I tried to find it in the feed to install it but to no avail.

Can someone please tell me what I did wrong?

11

C1000/3x00 General discussions / How To Restore C3100

« on: July 18, 2005, 03:31:37 am »

sounds like you need a nand backup to reflash your device, then a restore is possible.....I think.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=88663\"][{POST_SNAPBACK}][/a][/div]

I agree, but where would i  be able to get a Nand- backup?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=88665\"][{POST_SNAPBACK}][/a][/div]

Maybe you could try to ask to conics if they can put a NAND backup of the 3100 on their site, they already have the ones for all the other models.

12

Angstrom & OpenZaurus / New Kernel Akita-20050505 Installation Pb

« on: May 17, 2005, 04:46:51 am »

You can remove the warning if you are sure that the kernel is the right one (obviously you are as you've upgraded specifically, but anyone else seeing this warning take heed!), take a look in the init scripts.


Si
[div align=\"right\"][a href=\"index.php?act=findpost&pid=80068\"][{POST_SNAPBACK}][/a][/div]

Ok thanks, everythings went well after the delay so I guess I will look in the init script to remove the warning.

13

Angstrom & OpenZaurus / New Kernel Akita-20050505 Installation Pb

« on: May 16, 2005, 06:36:13 am »

Hi,

when I tried to install this new kernel on my C1000 I got this message
"Warning
Trying to run the wrong kernel
I will go to sleep during 1 min reset and reflash kernel during that time"

What did I do wrong?
I downloaded the new kernel put it on my sd card, renamed it and flashed it as usual.
The kernel is obviously installed but why do I get this message?

14

Angstrom & OpenZaurus / Taskbar Size And Usb Host On C1000 W/ Oz 3.5.3

« on: May 12, 2005, 06:15:12 am »

Re: taskbar size: are you sure you cleaned /home/root/Settings/* before flashing OZ?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=79286\"][{POST_SNAPBACK}][/a][/div]

Thanks a lot did everything you told me to and everythings is working now.  
I will try now to get my usb-ethernet to work.

15

Angstrom & OpenZaurus / Taskbar Size And Usb Host On C1000 W/ Oz 3.5.3

« on: May 11, 2005, 12:32:43 pm »

Hi I'm a new zaurus user,

I've just installed OZ on my C1000 and here is the problems I've encountered so far:
first, usb-host isn't working.
I know it was announced and there a command to make it work but when I type "modprobe usb_ohci_pxa27x" in the console it doesn't find this module. What can I do?Please help me with that as I really want to use my usb ethernet adaptator to connect at work.
 

otherwise I must say the look of my zaurus has quite improved with OZ but I can't seem to resize the taskbar and I find it's really small.
How can I do that? I tried to search in the settings tab  but found nothing on the size of the taskbar.