Messages

1

C1000/3x00 General discussions / Bluetooth On The Sl-3000?

« on: May 27, 2005, 03:19:52 am »

Yes, I am sorry that I forgot to mention what bit hasn't worked...
I am able to pair the devices. But I am not able to connect or send files between them. The network application (with bluetooth applet installed) has been set, but when I try to dial it, the phone does not respond at all. The zaurus just continues to say "initializing modem" but it never gets beyond that point.

I checked in /tmp/ and there was a file called "bluetooth-pppd-log". Inside the file was only the following line:
"Failed to open /dev/rfcomm1: Host is down".

----

Well which bit hasn't worked?

Has your phone paired?

Did the GPRS connection fail? If it did fail, please post the contents of /tmp/qpe-ppp-log .

You don't need any extra packages to get basic Bluetooth working. The qtopia--bluetoothnetworkapplet package doesn't need Java.

You do need to to a 'sdptool browse' to find the actual channel of the DUN profile of your phone as this can differ from model to model.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=78862\"][{POST_SNAPBACK}][/a][/div]

2

C1000/3x00 General discussions / Bluetooth On The Sl-3000?

« on: May 09, 2005, 07:16:46 am »

Can anyone please give corrections/comments/advice about why the steps below have not worked for me? Or should this configuration work?

SL-C3000 + Socket BT card (Version F) + Nokia 702NK/6630  phone?
----------------------------------------------------------------------------------------------------------------

1) download--> bluez_zaurus_2.12_2.4.20_alpha4_arm.ipk ( 211.87k )
[https://www.oesf.org/forums/index.php?act=Attach&type=post&id=279]
- Remember to rename the download and change some of those underscores (_) to bluez-zaurus_2.12-2.4.20-alpha4_arm.ipk


2) alpha4 (plus additional packages) installation:
- Removed the csr package and the alpha2 package.
- Installed alpha4 package.
-Install additional packages (not part of alpha4):
   -Install bluez libs??
   -Install bluez utils??
   -Install qtopia-bluetoothnetworkapplet (*Java installation required first)
-reboot.

3) Settings in Zaurus SL-C3000
-eject and reinsert BT card
#cardctl ident (check that card is recognized by zaurus)
#hciconfig (get BT mac address of zaurus side--> xx:xx:xx:xx:xx:xx)
    not necessary --> #sdptool browse (scan to find mac id)
# hcitool scan (scan for BT mac address of phone side--> xx:xx:xx:xx:xx:xx)
   -Service name : dial-up network ==> channel 1.


- re-entered settings in /etc/bluetooth/rfcomm.conf
- initial insertion of the Socket rev H card did not register with hcitool dev
- tried /etc/rc.d/init.d/bluetooth start --> didn't work either
- re-inserted the card. hcitool dev finally found the card.


vi /home/zaurus/Applications/Network/modules/IRDA.conf
find IRDA code --> IRDAxxxxxxxxxxx
vi /etc/ppp/peers/IRDAxxxxxxxxxxx
   -add '/dev/rfcomm0' at top line

4) Phone side settings (Vodafone in Japan, using Nokia 6630 phone with BT)
-Connect your phone via USB or BT and put setting to the phone:
   Access point: vodafone (Tools->Settings->Connection->
     Packet data->Access point)

5) Pairing between Zaurus and phone (use common pin numbers such as 1234 and then set for auto-pairing...)

6) Zaurus dial-up network settings (for Vodafone network in Japan)
User name: ai@vodafone
Pass word:vodafone
Dial: *99#
[div align=\"right\"][a href=\"index.php?act=findpost&pid=73446\"][{POST_SNAPBACK}][/a][/div]
[/quote]

3

C1000/3x00 General discussions / Bluetooth On The Sl-3000?

« on: April 04, 2005, 06:17:14 am »

Would it be possible for someone to make an overall summary of setup instructions for this topic? Eg. SL-C3000 + Socket BT card + Nokia 6630 (or other Symbian series 60 model) phone?
------------------------------------

Here is a first try at the proper sequence of actions. But I failed after trying this, so additional steps are probably required.... Please feel free to add on you own knowledge. Please!!!
----

1) download--> bluez_zaurus_2.12_2.4.20_alpha4_arm.ipk ( 211.87k )
[https://www.oesf.org/forums/index.php?act=Attach&type=post&id=279]
- Remember to rename the download and change some of those underscores (_) to bluez-zaurus_2.12-2.4.20-alpha4_arm.ipk


2) alpha4 (plus additional packages) installation:
- Removed the csr package and the alpha2 package.
- Installed alpha4 package.
-Install additional packages (not part of alpha4):
   -Install bluez libs??
   -Install bluez utils??
   -Install qtopia-bluetoothnetworkapplet (*Java installation required first)
-reboot.

3) Settings in Zaurus SL-C3000
-eject and reinsert BT card
#cardctl ident (check that card is recognized by zaurus)
#hciconfig (get BT mac address of zaurus side--> xx:xx:xx:xx:xx:xx)
    not necessary --> #sdptool browse (scan to find mac id)
# hcitool scan (scan for BT mac address of phone side--> xx:xx:xx:xx:xx:xx)
   -Service name : dial-up network ==> channel 1.


- re-entered settings in /etc/bluetooth/rfcomm.conf
- initial insertion of the Socket rev H card did not register with hcitool dev
- tried /etc/rc.d/init.d/bluetooth start --> didn't work either
- re-inserted the card. hcitool dev finally found the card.


vi /home/zaurus/Applications/Network/modules/IRDA.conf
find IRDA code --> IRDAxxxxxxxxxxx
vi /etc/ppp/peers/IRDAxxxxxxxxxxx
   -add '/dev/rfcomm0' at top line

4) Phone side settings (Vodafone in Japan, using Nokia 6630 phone with BT)
-Connect your phone via USB or BT and put setting to the phone:
   Access point: vodafone (Tools->Settings->Connection->
     Packet data->Access point)

5) Pairing between Zaurus and phone (use common pin numbers such as 1234 and then set for auto-pairing...)

6) Zaurus dial-up network settings (for Vodafone network in Japan)
User name: ai@vodafone
Pass word:vodafone
Dial: *99#

4

C1000/3x00 General discussions / Bluetooth On The Sl-3000?

« on: March 22, 2005, 10:18:24 am »

Would it be possible for someone to make an overall summary of setup instructions for this topic? Eg. SL-C3000 + Socket BT card + Nokia 6630 (or other Symbian series 60 model) phone?

I have tried all of the tricks and tips on this and other sites, but I still cannot get it to work. Previously, I had an SL-C760 + Nokia 7600 that paired and connected successfully with the Socket BT card, but I am utterly confused with the new Zaurus.

Current ZUG Howto document ( under SL-Cxxx) on this topic is outdated....

Thanks in advance.