Messages

1

Sharp ROMs / Planex Gw-cf11x On Cacko 1.22a

« on: July 11, 2005, 03:29:53 am »

Well, while I wait for next Cacko 1.22 release I'm working with the original Sharp ROM it is the fastest way to have my wifi card working

Montero,

I think it is neccesary to flash the rom of this card. If you open sharp's ipk it contains some .hex files that contain the new rom data.

I will try that as soon as they fix my zaurus in bicamera. It died!

Also I was thinking about using cacko 21 and installing sharp's ipk. cacko 21 didn't use hostap_cs drivers, it used wlang-ng drivers so that might work.

Hi zetile

I already tried sharp driver under cacko and also this one http://digit.que.ne.jp/visit/index.cgi?Lin...%E9%A5%A4%A5%D0
both with identical results, card recognized but no led light and no connection.
typing cardctl status in the console I get that the state is [suspended] but I can't get it ready with cardctl resume

hopeless   

[div align=\"right\"][a href=\"index.php?act=findpost&pid=84859\"][{POST_SNAPBACK}][/a][/div]

[div align=\"right\"][a href=\"index.php?act=findpost&pid=84872\"][{POST_SNAPBACK}][/a][/div]

2

Sharp ROMs / Planex Gw-cf11x On Cacko 1.22a

« on: June 19, 2005, 05:14:24 am »

Hi zetile

I already tried sharp driver under cacko and also this one http://digit.que.ne.jp/visit/index.cgi?Lin...%E9%A5%A4%A5%D0
both with identical results, card recognized but no led light and no connection.
typing cardctl status in the console I get that the state is [suspended] but I can't get it ready with cardctl resume

hopeless  

 

Montero:

I have the same issue with the same card.  Sharp released the wlan-ng drivers in the update that supports this wf card in the stock rom, but these drivers were removed from cacko 1.22. The readme says that the drivers are available as a separate download but I cannot find them.

Any luck?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=84231\"][{POST_SNAPBACK}][/a][/div]

3

Sharp ROMs / Planex Gw-cf11x On Cacko 1.22a

« on: May 26, 2005, 06:54:41 am »

Hi all,

Recently I bought a PLANEX GW-CF11X, I downloaded the last prism3 drivers from sharp website, with these drivers in the original Sharp ROM everything worked perfectly but in cacko ROM the card is recognized and no led blinks at all, after cardctl status I see that is suspended but it doesn't change its status after cardctl resume, any hint?

I tried also OZ and it worked even if it was recognized as another kind of card. The problem is that I need Japanese support and cacko 1.22 rom is the one that suits me the best

Thanx

4

Sharp ROMs / Cacko Rom 1.22 Hotfix A Is Available!

« on: May 21, 2005, 01:50:52 am »

Hi Maslovsky, thanx for cacko 1.22A, I've tried also OZ and pdaXrom and since I need both Japanese and English support  this rom matches perfectly for me.

But, I've got still a little problem solving this will make mi Z c760 work 100% . I bought a PLANEX GW-CF11X, downloaded the last prism3 drivers from sharp website, with these drivers in the original Sharp ROM everything worked perfectly but in cacko ROM the card is recognized and no led blinks at all, after cardctl status I see that is suspended but it doesn't change its status after cardctl resume, any hint?

Thanx again

Hotfix A package is released. It can be installed on both full and lite ROM versions and available for download here: http://cacko.oesf.org/downloads/rom/1.22/c...x_1.22a_arm.ipk

Important: The hotfix package has been updated again to fix the issue with Backup/Restore application! Please, download hotfix package again and reinstall it. Check ROM version after install, it should include 0103090205

 - Updated Polish keymap (hopefully)
 - Fixed entry for SMC card
 - Added entry for Corega WiFi card

Have more fun!

------------------

CACkO Zaurus Qtopia ROM 1.22a 0103090205 (SL-C7x0) "Lisa"
Mon Feb 09 01:03 MSD 2004

1.22a Release Notes:

Bluetooth:

 - Added support for Ambicom BT2000C CF Card
 - Added OPD (Obex Push Daemon) and obextool - this allows to send/recieve PIM data and files via bluetooth
 - Updated dialup and pan bluetooth network applets

Networking:

 - Updated configuration for the following network cards:
   
   - Linksys WCF11 v2.5
   - Linksys WCF-12
   - Prolink WL201/Wisgo NL-2511CF(ETSI)
   - Sony PEGA-WL100
   - D-Link DWL-650/660 CF Cards
   - SanDisk Wireless CF Card
   - Trendnet TEW-22CF
   - Zcomax XI-325H
   - BUFFALO WLI2-CF-S11
   
 - Added generation of missing RSA key for SSH v1
 - Updated support for Audiovox GPRS CF card

ROM:

 - Fixed the __udivsi3 undefined symbol problem with zsh, vim and some other applications
 - Created link libpcap 0.7.0 -> libpcap 0.8.3
 - Created link bzip2 -> bunzip2
     
Qtopia:

 - Fixed missing "?" in Deutsch leymap
 - Fixed problem wirh Polish keymap not being loaded by keyboard applet
 - Fixed missing unicode keyboard input method
 - Updated handwriting input method
 - Added missing screen shot sound
[div align=\"right\"][a href=\"index.php?act=findpost&pid=65577\"][{POST_SNAPBACK}][/a][/div]