Messages

1

Zaurus - pdaXrom / Got Java Plugin For Firefox Working

« on: April 28, 2006, 12:32:04 am »

anunakin,

where do you find the libconv package, beta 1 feed?

2

Zaurus - pdaXrom / Got Java Plugin For Firefox Working

« on: April 26, 2006, 04:05:15 am »

Tested, works fine for me but we need install firefox and plugins at same mount point!    
[div align=\"right\"][a href=\"index.php?act=findpost&pid=124581\"][{POST_SNAPBACK}][/a][/div]

Are you using beta 3?

3

Zaurus - pdaXrom / Got Java Plugin For Firefox Working

« on: April 25, 2006, 10:18:12 am »

did everyone install perl, jamvm 1.4.2 and classpath 0.9?

the way the plugin works is that firefox loads libgcjwebplugin.so which then invokes the gcjappletviewer perl script which in turn calls jamvm which loads classpath and gcjapplet.jar

make sure that jamvm and classpath are correctly configured and can actually run java applications
[div align=\"right\"][a href=\"index.php?act=findpost&pid=124472\"][{POST_SNAPBACK}][/a][/div]

I have installed all ipk, but ...haven't configured jamvm and classpath... do i need to change any configuration file?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=124503\"][{POST_SNAPBACK}][/a][/div]

i have use the following exports, but still fail
# export PATH=$PATH:/usr/java/jamvm/bin
# export CLASSPATH=/usr/java/jamvm/share/jamvm/classes.zip:/usr/java/classpath/share/classpath/glibj.zip

4

Zaurus - pdaXrom / Got Java Plugin For Firefox Working

« on: April 25, 2006, 10:03:56 am »

did everyone install perl, jamvm 1.4.2 and classpath 0.9?

the way the plugin works is that firefox loads libgcjwebplugin.so which then invokes the gcjappletviewer perl script which in turn calls jamvm which loads classpath and gcjapplet.jar

make sure that jamvm and classpath are correctly configured and can actually run java applications
[div align=\"right\"][a href=\"index.php?act=findpost&pid=124472\"][{POST_SNAPBACK}][/a][/div]

I have installed all ipk, but ...haven't configured jamvm and classpath... do i need to change any configuration file?

5

Zaurus - pdaXrom / Got Java Plugin For Firefox Working

« on: April 24, 2006, 12:00:13 pm »

Failed. Firefox closed automatically after browsing java website. Error message:
GLib-ERROR **: The thread system is not yet initialized.
aborting...
/usr/lib/firefox/lib/firefox-1.5/run-mozilla.sh: line 131: 5024 Aborted "$prog" ${1+"$@"}

I am using Pdaxrom beta 3
libconv is from beta 1 feed

6

C1000/3x00 General discussions / Sl-c3200?

« on: March 08, 2006, 11:26:40 pm »

just found this news:
http://www.embwise.com/new_support_sdio.htm

anyone knows what this is? is this driver for sale? I am confused

7

C1000/3x00 General discussions / Sl-c3200?

« on: March 08, 2006, 11:11:13 pm »

As I understand SDIO already supported in C1000 and C3100. What we lack of is the device driver!
http://digit.que.ne.jp/visit/index.cgi?Lin...b9%2fSL%2dC3200
http://k-tai.impress.co.jp/cda/article/new...page/28124.html

8

Zaurus - pdaXrom / Cross Compiling On Vmware Image

« on: February 26, 2006, 10:15:14 am »

I try to build the gThumb application, but the following errors appear after i issue the make command:
/opt/cross/arm/3.4.5-xscale-softvfp/armv5tel-cacko-linux/lib/libgnomeui-2.so: could not read symobls: File in wrong format

any idea what happen?

9

Zaurus - pdaXrom / Enlightenment Dr17 - Cvs

« on: February 06, 2006, 02:06:49 am »

I´ve just started to compile a new E17 build  when I found out that
someone else did the job and compilied a more recent version of E17 for pdaxrom already.
There are no major changes in this new version so far, but setting some of the options is now more easy.
(Version 0.16.999.023)

You can get the files and some short documentation here.

Maybe the author of this build will keep the packages more uptodate for those
who want to stay bleeding edge

EDIT : This build works well, but make sure you don't mix both feeds because the
          dependecies don't match the corresponding ipks.

cmpayc13: there is also no engage module in this build
[div align=\"right\"][a href=\"index.php?act=findpost&pid=113520\"][{POST_SNAPBACK}][/a][/div]

I just install it on my C1000, it works. However, when it starts an error message appeared "too many init levels. MAX=32", after pressing "ok" to continue, everything just fine.

Any idea how to solve this issue?

10

Zaurus - pdaXrom / Needsl-c7x0/860 Owner With Sd Mmc Cards Bigger 1g

« on: February 03, 2006, 04:17:01 am »

will the access time (read / write) increase with this driver?

11

Zaurus - pdaXrom / 1.1.0beta1 Is Out!

« on: February 03, 2006, 01:32:56 am »

Does anyone know whether the kernel for the C-1000 & C-3100 has been significantly changed from RC12 to Beta 1.10? I'm also assuming that since the c-1000 kernel is made from C-3100 sources they are the same.

Evidently, there are some patches required to get the Orinico drivers working properly for the Socket WiFi cards in Kismet. They work fine for connecting to a network, but seem to not be able go into monitor mode. I've posted this bug and in the mean time have tried using a C-1000 RC12 kernel that was patched by cjb http://www.neonbox.org/zaurus/index.html Unfortunately, it didn't work. My C-3100 would boot. Of course, I may have screwed up while moving the C-1000 kernel from the folder in tools.tar to the C-3100 folder, but the flash seem to go without error. Before I backup everything and try again I was hoping someone with more knowledge than I could weigh in on the issue.

Cheers,

Jerry
[div align=\"right\"][{POST_SNAPBACK}][/a][/div]

Are you using hostap driver?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=113469\"][{POST_SNAPBACK}][/a][/div]

No, I ended up recompiling the kernel without the Hermes drivers and using newer drivers compiled seperately. See [a href=\"http://mail.pdaxrom.org/contrib/docs/kernel-compile-3100.html]http://mail.pdaxrom.org/contrib/docs/kerne...mpile-3100.html[/url]

Don't tell me it would have been simplier to use the hostap drivers  

Jerry
[div align=\"right\"][{POST_SNAPBACK}][/a][/div]

I don't know, but i think it would be simplier to switch to hostap drivers to make kismet works. check the following links
[a href=\"https://www.oesf.org/forums/index.php?showtopic=7151&st=0&p=44759&#entry44759]https://www.oesf.org/forums/index.php?showt...759&#entry44759[/url]
https://www.oesf.org/forums/index.php?showtopic=15608&hl=
https://www.oesf.org/forums/index.php?showtopic=16246&hl=

12

Zaurus - pdaXrom / 1.1.0beta1 Is Out!

« on: February 02, 2006, 10:57:56 pm »

Does anyone know whether the kernel for the C-1000 & C-3100 has been significantly changed from RC12 to Beta 1.10? I'm also assuming that since the c-1000 kernel is made from C-3100 sources they are the same.

Evidently, there are some patches required to get the Orinico drivers working properly for the Socket WiFi cards in Kismet. They work fine for connecting to a network, but seem to not be able go into monitor mode. I've posted this bug and in the mean time have tried using a C-1000 RC12 kernel that was patched by cjb http://www.neonbox.org/zaurus/index.html Unfortunately, it didn't work. My C-3100 would boot. Of course, I may have screwed up while moving the C-1000 kernel from the folder in tools.tar to the C-3100 folder, but the flash seem to go without error. Before I backup everything and try again I was hoping someone with more knowledge than I could weigh in on the issue.

Cheers,

Jerry
[div align=\"right\"][a href=\"index.php?act=findpost&pid=112706\"][{POST_SNAPBACK}][/a][/div]

Are you using hostap driver?

13

Zaurus - pdaXrom / Research Some Softwares

« on: December 26, 2005, 11:46:04 pm »

then use stardict, it works on pdaxrom

14

C1000/3x00 General discussions / Zdict

« on: December 11, 2005, 08:39:43 pm »

After I install zdict to my c1000, i can't install any program to internal flash anymore. When installing program, only sd and cf location is available.

15

Zaurus - pdaXrom / For Testing: Hostap Drivers And Java Midps

« on: November 27, 2005, 02:08:26 am »

The hostap driver works
however for my Ambicom WL1100C card, it shows that it is a Z-Com XI300 card when I press the pcmica icon at the bottom panel, i need to manually put a # in front of the Z-Com card and insert the Ambicom information in the hostap_cs.conf