Messages

1

C1000/3x00 General discussions / C1000: Which Rom Would Best Fit To My Needs?

« on: November 25, 2005, 11:20:36 am »

Ok, got my firmware updated, and cacko works for me. So no experimenting with roms today!

2

Sharp ROMs / D-link Dcf-660w Not Working With Cacko 1.23

« on: November 25, 2005, 11:17:08 am »

Hey, now I got it working:
http://bryandeluca.com/cacko/bugs/bug.php?...&bugid=67&pos=0

Posted By: my-zaurus at narod dot ru
Date: 7:39 AM 11-25-2005
Make sure the card is not suspnded - type "cardctl scheme qpewlan0; cardctl reset" before trying to update the firmware

And that did the trick. After it, I could update firmware, and it works!

3

C1000/3x00 General discussions / C1000: Which Rom Would Best Fit To My Needs?

« on: November 25, 2005, 10:51:28 am »

maybe not OZ
[div align=\"right\"][{POST_SNAPBACK}][/a][/div]

Ok. From here I got idea it might work:

[a href=\"https://www.oesf.org/forums/index.php?showtopic=16272]https://www.oesf.org/forums/index.php?showtopic=16272[/url]

4

C1000/3x00 General discussions / C1000: Which Rom Would Best Fit To My Needs?

« on: November 25, 2005, 10:11:30 am »

well both pdaxrom and OZ have X GUIs so take your choice.  Since you are in an experimental mood, I guess you could try both.

edit: I see someone has a possible solution in that other thread
[div align=\"right\"][a href=\"index.php?act=findpost&pid=104825\"][{POST_SNAPBACK}][/a][/div]

No, I'm not experimental mood at all, I would like easy and fast way to get everything working. Unfortunately upgrading FW is not possible. prism2_srec does not work unless kernel driver is talking properly with card. And my problem it isn't, so back to square 1. Maybe I try OZ.

5

Sharp ROMs / D-link Dcf-660w Not Working With Cacko 1.23

« on: November 25, 2005, 10:06:07 am »

Hmm, url for firmware update? Is it from dlink on somewhere else?
[div align=\"right\"][{POST_SNAPBACK}][/a][/div]

Ok, I got links:

[a href=\"http://linux.junsun.net/intersil-prism/]http://linux.junsun.net/intersil-prism/[/url]
http://www.red-bean.com/~proski/firmware/

Unfortunately doesn't help, since prism2_srec says:

ioctl: connection timed out
Missing wlan component info
Could not read wlan RIDs

So I would need more recent FW to update FW. :-(

6

Sharp ROMs / D-link Dcf-660w Not Working With Cacko 1.23

« on: November 24, 2005, 02:17:21 pm »

Firmware update. Use the last firmware. Worked for me.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=104823\"][{POST_SNAPBACK}][/a][/div]

Hmm, url for firmware update? Is it from dlink on somewhere else?

Edit: I cannot find any firmware from Dlink pages, only Windows driver. I emailed dlink and asked.

7

C1000/3x00 General discussions / C1000: Which Rom Would Best Fit To My Needs?

« on: November 24, 2005, 11:17:24 am »

Is this enough to tell?

https://www.oesf.org/forums/index.php?showtopic=16264

Made even bug, and got back 'works for me':

http://bryandeluca.com/cacko/bugs/bug.php?op=show&bugid=67

Basicly, now I need to install some other rom to be sure my HW is ok. And while installing some other rom, experiimenting something which would best fit my needs would be good idea

-Tavasti

8

Sharp ROMs / D-link Dcf-660w Not Working With Cacko 1.23

« on: November 24, 2005, 08:30:25 am »

Looks like many of have wlan problems with cacko 1.23. I entered this bug to http://bryandeluca.com/cacko/bugs/query.php also

9

C1000/3x00 General discussions / Mobile Modem

« on: November 24, 2005, 07:52:03 am »

I'm using mobile phone with bluetooth. You don't mentition do you need CDMA, GSM data or GPRS?

10

C1000/3x00 General discussions / C1000: Which Rom Would Best Fit To My Needs?

« on: November 24, 2005, 06:09:18 am »

Few days ago got shiny C1000. With original rom, my bluetooth was not supported.  Switched to Cacko 1.23, and now wlan is not working. So I'd like to know which rom would best fit to my needs:

- I have C1000, Dlink dcf-660W, and planning to get some CF bluetooth (something which is available)
- Ineed ssh, web browser and some simple spreadsheet and email (ssl+imap, smtp+ssl+auth)
- I would like to have X support, for some future needs

So which rom would best fit for my needs?

-Tavasti

11

Sharp ROMs / D-link Dcf-660w Not Working With Cacko 1.23

« on: November 23, 2005, 11:42:45 am »

Looks like my D-link DCF-660W is not working with cacko 1.23. I'm not sure, but with original ROM I got my C1000 if might been working. At least wireless monitor was showing some values, now with cacko, nothing. Here is what dmesg says when I plug card in:

hostap_crypt: registered algorithm 'NULL'
hostap_cs: 0.3.7 - 2005-02-12 (Jouni Malinen <jkmaline@cc.hut.fi>)
hostap_crypt: registered algorithm 'WEP'
hostap_cs: setting Vcc=33 (constant)
hostap_cs: CS_EVENT_CARD_INSERTION
hostap_cs: setting Vcc=33 (from config)
Checking CFTABLE_ENTRY 0x01 (default 0x01)
IO window settings: cfg->io.nwin=1 dflt.io.nwin=1
io->flags = 0x0046, io.base=0x0000, len=64
hostap_cs: Registered netdevice wifi0
hostap_cs: index 0x01: Vcc 3.3, irq 135, io 0xf6000000-0xf600003f
prism2_hw_init: initialized in 210 ms
wifi0: NIC: id=0x800c v1.0.0
wifi0: PRI: id=0x15 v1.1.1
wifi0: STA: id=0x1f v1.7.4
wifi0: registered netdevice wlan0
prism2: wlan0: operating mode changed 3 -> 2
hostap_cs: CS_EVENT_PM_SUSPEND
hostap_cs: CS_EVENT_RESET_PHYSICAL
pxa_pcmcia_suspend(0)
wifi0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wifi0: hfa384x_cmd_issue - timeout - reg=0x8888
wifi0: hfa384x_cmd: entry still in list? (entry=c24be520, type=0, res=-1)
wifi0: hfa384x_cmd: interrupted; err=-110
wifi0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fd51, len=6)
wifi0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wifi0: hfa384x_cmd_issue - timeout - reg=0x8888
wifi0: hfa384x_cmd: entry still in list? (entry=c24be5e0, type=0, res=-1)
wifi0: hfa384x_cmd: interrupted; err=-110
wifi0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fd51, len=6)

This continues forever. Ideas what to do?

-Tavasti