1
C1000/3x00 Hardware / Error: "device Is Not Ready" Why?
« on: November 27, 2006, 08:22:22 am »
Just a bunch of files which are >2GB all together.
Select language:
News:
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
C1000/3x00 Hardware / Error: "device Is Not Ready" Why?
« on: November 27, 2006, 07:33:18 am »
I reboot Z It does not help.
2Gb is not one big file this is plenty small ones for example tons of .MP3 or .JPG
I think it not a Windows USB mistake.
Old Hitachi 4Gb microdrive works well with 2gb and more data copying.
Also If in "PC link" set SD as internal storage copying passes well.
Also about it speaks that fact that after reformating /dev/hdc3 problem temporarily fixed.
Seems that a problem in integrity FAT or time delays in work of the Zaurus internal disk controller
which windows estimate as unavailability(not ready).
2Gb is not one big file this is plenty small ones for example tons of .MP3 or .JPG
I think it not a Windows USB mistake.
Old Hitachi 4Gb microdrive works well with 2gb and more data copying.
Also If in "PC link" set SD as internal storage copying passes well.
Also about it speaks that fact that after reformating /dev/hdc3 problem temporarily fixed.
Seems that a problem in integrity FAT or time delays in work of the Zaurus internal disk controller
which windows estimate as unavailability(not ready).
3
C1000/3x00 Hardware / Error: "device Is Not Ready" Why?
« on: November 26, 2006, 03:54:42 pm »
Hi!
I us Cacko 1.23 on 3100.
I have replaced internal hard disk with Transcend 8 Gb CF.
fdisk -l:
Disk /dev/hdс: 8320 MB, 8320499712 bytes
16 heads, 63 sectors/track, 16122 cylinders
Units = cylinders of 1008 * 512 = 516096 bytes
Device Start End Blocks ID System
/dev/hdc1 1 20 10048+ 83 Linux
/dev/hdc2 21 2000 997920 83 Linux
/dev/hdc3 2001 16122 7117488 с W95 FAT32 (LBA)
All works well and quickly. Except one thing:
When I try to copy files from PC through USB to internal disk (USB Storage mode)
some time all goes well but after copying approximately 2 Gb
Windows give out Error: "Device is not ready".
And it is more anything to write on internal disk it is impossible.
Copying between SD and internal disk is Ok.
...
I delete /dev/hdc3,
create it again,
mkfs.vfat -F 32 it again.
Same thing happen.
Some time all goes well... and:
Error: "Device is not ready"
I us Cacko 1.23 on 3100.
I have replaced internal hard disk with Transcend 8 Gb CF.
fdisk -l:
Disk /dev/hdс: 8320 MB, 8320499712 bytes
16 heads, 63 sectors/track, 16122 cylinders
Units = cylinders of 1008 * 512 = 516096 bytes
Device Start End Blocks ID System
/dev/hdc1 1 20 10048+ 83 Linux
/dev/hdc2 21 2000 997920 83 Linux
/dev/hdc3 2001 16122 7117488 с W95 FAT32 (LBA)
All works well and quickly. Except one thing:
When I try to copy files from PC through USB to internal disk (USB Storage mode)
some time all goes well but after copying approximately 2 Gb
Windows give out Error: "Device is not ready".
And it is more anything to write on internal disk it is impossible.
Copying between SD and internal disk is Ok.
...
I delete /dev/hdc3,
create it again,
mkfs.vfat -F 32 it again.
Same thing happen.
Some time all goes well... and:
Error: "Device is not ready"
4
C1000/3x00 General discussions / Genesis Neogeo Snes Turbografx Nes Gameboy Emu
« on: August 09, 2006, 02:00:31 pm »
Hi!
Try to play with these joystik enabled versions :
sms-sdljoy
snes9x-sdljoy
dgen-sdljoy
znester-sdljoy
From :
http://web.mol.ru/~zaurus/feed/
Here the good link for those who searches ROMs :
http://www.emu-land.net/
Cresho!
There can be it good idea to include
in your good selection emulator of
Sega Master System (sms-sdljoy)
It is simple but it is useful.
Many thanks people for this topic!
Try to play with these joystik enabled versions :
sms-sdljoy
snes9x-sdljoy
dgen-sdljoy
znester-sdljoy
From :
http://web.mol.ru/~zaurus/feed/
Here the good link for those who searches ROMs :
http://www.emu-land.net/
Cresho!
There can be it good idea to include
in your good selection emulator of
Sega Master System (sms-sdljoy)
It is simple but it is useful.
Many thanks people for this topic!
5
User Request for Applications / How To Save And Load A Game State In Dgen?!
« on: December 06, 2005, 09:06:14 am »
How to save and load a game state in DGen?!!
Pages: [1]