Messages

1

Zaurus - pdaXrom / How Do I Press The Middle Or Right Mouse Button?

« on: August 03, 2006, 05:23:31 am »

How do I press the middle or right mouse button? in beta 4 an make to work the up arrow?
thanks

2

Spain / Openzaurus Y Wep

« on: August 03, 2006, 02:01:23 am »

como puedo configurar la clave wep en openzaurus, en el apartado de network la pongo y no me deja, he probado a poner en ascii s: delante de la clave y nada, como se puede hacer en linea de comandos?, sin clave en una red sin clave si conecta

gracias

3

Spain / Wellenreiter Y Aircrack

« on: August 02, 2006, 06:19:58 am »

hola!! en el wellenreiter la seccion de elegir sniffar en un solo canal en vez de en todos y en la seccion de inyectar paquetes viene desactivado, como se puede activar? y otra pregunta, de donde puedo conseguir el aircrack-ng para cacko que funciones?

gracias!!

4

Spain / Firefox 1.5

« on: May 25, 2006, 03:39:28 pm »

hola, de donde me podria bajar el firefox 1.5 para pdaxrom? en la pagina solo esta el 0.8 y ademas me da un error y no lo puedo instalar algun feed q funcione?

5

Spain / Problemas Al Cargar Bateria

« on: May 02, 2006, 08:09:38 am »

no es una c 860, mi pregunta es sobre una c 1000, tienen la misma placa interior?, los cargadores conlos q probe son los dos originales de sharp

6

Spain / Problemas Al Cargar Bateria

« on: April 23, 2006, 05:59:28 pm »

si, con dos baterias y dos cargadores, en una carga y en otra no,solo hasta el 33

7

Spain / Problemas Al Cargar Bateria

« on: April 22, 2006, 05:23:51 pm »

si he probado con dos baterias y en otra zaurus y se cargan bien

8

Spain / Problemas Al Cargar Bateria

« on: April 22, 2006, 10:54:16 am »

dura 20minutos y lo dejo horas y horas y el led naranja nunca se apaga, con otra zaurus se carga entera pero con esta hasta el 33

9

Spain / Problemas Al Cargar Bateria

« on: April 22, 2006, 07:24:29 am »

hola a todos , haber si alguien me puede ayudar, resulta que al poner al cargar la zaurus solo se carga al 33 porciento,he probado con dos baterias y dos cargadores, cuales son las tensiones que debe dar al ponerel cable AC en los pines donde hace contacto la bateria copn la zaurus? podria ser algo interno?diodos que hay justo antes de los pines?, se podrian dessoldar y soldar otros igales o se estropean con el calor y tiene q ser un soldado especial, tengo dos zaurus y con la otra si que se carga bien, ayuda please

salu2

10

Cxx0 Hardware / Battery

« on: April 07, 2006, 12:35:47 pm »

helllo! i have a problem ,when i try to charge my battey for hours in a zaurus and the battery only charge to 38% then i try charge this batery in other zaurus and the battery is full charged in a few hours, how it is possible?

11

C1000/3x00 General discussions / After Hard Reset C1000 Not Work

« on: January 21, 2006, 09:28:04 am »

Did you follow these exact steps and couldn't get into the Diagnostic menu?

Unplug Z and pull out battery
Press and hold D+M keys
Plug power back in while still holding D+M pressed and wait 5 seconds
[div align=\"right\"][a href=\"index.php?act=findpost&pid=111751\"][{POST_SNAPBACK}][/a][/div]

yes exactly i cant´t get into diagnostic menu

what can i do?i have try to pull out the battery for a day but not work

12

C1000/3x00 General discussions / After Hard Reset C1000 Not Work

« on: January 20, 2006, 12:28:48 pm »

the problem is that i cant go into DiagnosticsMenu

13

C1000/3x00 General discussions / After Hard Reset C1000 Not Work

« on: January 20, 2006, 10:38:48 am »

try leaving your zaurus plugged into AC for a long while.  If your battery is drained enough, it will not allow it to turn on or even the orange led to come on.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=111699\"][{POST_SNAPBACK}][/a][/div]

testing....when i plugin the ac power the led is on by 5 seconds but later is off, with the ac power plugin is off all time

14

C1000/3x00 General discussions / After Hard Reset C1000 Not Work

« on: January 20, 2006, 10:09:52 am »

try removing the battery for a couple of minutes the try the ok+on function.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=111654\"][{POST_SNAPBACK}][/a][/div]

i´ve try removing the batery and ok+on but not work, te orange led is off too in AC power connected
what can i do?

15

C1000/3x00 General discussions / After Hard Reset C1000 Not Work

« on: January 20, 2006, 02:38:31 am »

hello!!

i have a problem, i have a zaurus c-1000, i try to install openzaurus follow the indications of www.openzaurus.org
Prepare the image for flashing:

1) Download files: zImage.bin, initrd.bin, updater.sh. If the filenames are different, change them to the above or else the zaurus will not be able to find them. The filenames are somewhat case sensitive. Either use the capital I in zImage.bin, or all lower, or all caps.

2) Put files in the root directory of your CF card /mnt/cf (The flasher program asks you if you want to use CF or SD, so it is possible to use an SD instead of a CF card).

The steps to flash the C1000 from CF are(1):

1) Ensure that your C1000 machine has a standard flash partitioning (e.g. as it was originally), flashing may fail if this is not the case

2) Turn the zaurus over and flip the battery case switch to “Unlocked”. Remove the battery cover, and find the small reset microswitch on the left. The battery cover or the stylus can be used to press it.

3) Replace the battery cover and switch to “Locked”.

4) Insert the CF card with the image in the root, as described above.

5) Plug in the AC power jack. The yellow charge lamp must be on indicating external power, or you will get an error message in japanese later.

6) Press the “OK” key in front of the space bar and keep it pressed while pressing the “On/Off” button on the back side.

7) The Maintenance Screen will display. Choose “Update” this is item 4.

The next screen will ask the source, choose “CF” this is item 2.

9) The next screen asks for confirmation, choose “Yes” this is the left button

The Zaurus will now erase the flash, write the new image, then reboot to your new Operating System

Note that the flashing process does not erase your /home directory, therefore settings from other systems may remain there and possibly cause problems

(1)If flashing from SD, just replace CF with SD.

This process is almost the same as for the C7xx/C8xx series
 but in te 6 step my c-1000 not turn on, wat can i do? please help me!