Messages

1

5x00 Hardware / Need Nand For 5600 Pxa250 Of Sharp Original

« on: October 14, 2006, 01:20:29 pm »

Does anyone out there have a nand backup image of the original sharp stuff for a poodle with 250 cpu?? 

I found only one so far and it is a TheKompany Rom rather than original sharp. 

So you simply do a NAND restore of 'that' one and then flash the Sharp image.
[div align=\"right\"][{POST_SNAPBACK}][/a][/div]

Unless I'm missing something, I tried that and I don't get sharp coming up it still says TheKompany and I have none of the hancom software or anything.  Did I do it wrong???
[div align=\"right\"][a href=\"index.php?act=findpost&pid=143851\"][{POST_SNAPBACK}][/a][/div]

After you flash the Sharp Rom you must once again bring up the maintenance menu and select Format.

Here's the files:
[a href=\"http://www.myzaurus.com/ROMupdate6.asp]http://www.myzaurus.com/ROMupdate6.asp[/url]
[div align=\"right\"][a href=\"index.php?act=findpost&pid=143865\"][{POST_SNAPBACK}][/a][/div]

WORKED GREAT!!! thanks.  I didn't know that step was necessary.

2

5x00 Hardware / Need Nand For 5600 Pxa250 Of Sharp Original

« on: October 12, 2006, 12:26:09 pm »

Does anyone out there have a nand backup image of the original sharp stuff for a poodle with 250 cpu?? 

I found only one so far and it is a TheKompany Rom rather than original sharp. 

So you simply do a NAND restore of 'that' one and then flash the Sharp image.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=143768\"][{POST_SNAPBACK}][/a][/div]

Unless I'm missing something, I tried that and I don't get sharp coming up it still says TheKompany and I have none of the hancom software or anything.  Did I do it wrong???

3

5x00 Hardware / Need Nand For 5600 Pxa250 Of Sharp Original

« on: October 11, 2006, 05:27:15 pm »

Does anyone out there have a nand backup image of the original sharp stuff for a poodle with 250 cpu??  

I found only one so far and it is a TheKompany Rom rather than original sharp.  

Anyone???

4

Angstrom & OpenZaurus / Poodle Kernel 2.6 Preview

« on: October 09, 2006, 02:28:58 pm »

Thanks for the link, but where is the NAND images.  I thought they were there previously.  I need a 250 NAND that goes back to Sharp image.  Right now I only have the one from galacticslacker that is a TheKompany ROM.  
Any ideas???

5

Angstrom & OpenZaurus / Poodle Kernel 2.6 Preview

« on: October 07, 2006, 11:38:56 am »

I was wondering where the latest poodle kernel is?  I've been watching this thread and tried to download the july 26 and I get a 404 error...
Any ideas?

6

Angstrom & OpenZaurus / Poodle Kernel 2.6 Preview

« on: June 10, 2006, 03:34:35 pm »

Any specific place to look for current dated updates by the 2 developers doing Poodle work?  The status page on OZ gets changed but no dated information to tell when things are getting fixed.  Maybe a blog with just little notes regarding what got fixed when and by whom and if other bugs are found where to report them to and where the latest test releases can be downloaded.  

Thanks

7

Angstrom & OpenZaurus / Sl5600 Oz 354 And Socket Low Power Wifi Cf?

« on: April 12, 2006, 10:12:18 pm »

Can you ssh in while it's locked?

Si
[div align=\"right\"][a href=\"index.php?act=findpost&pid=122890\"][{POST_SNAPBACK}][/a][/div]

I don't know alot about linux.  I could use my winxp laptop to do this if I knew what program to use.  I don't even know if it is getting an IP from the router and what it is.  I guess I could check the router's IP table for that though..  sorry, just typing to myself I guess...

8

Angstrom & OpenZaurus / Is There A Wifi Sitesurvey App For Oz?

« on: April 12, 2006, 11:52:52 am »

I'm wondering if there is a site survey app for OZ.  One that can give me a full list of available wifi spots in the area and then allow me to choose which one to connect to.  standard sharp rom just seems to connect to whatever is available unless you force the networking applet to do otherwise.  
It would need to show me channel, signal strength, type of encryption and SSID.  I'm not familiar with linux very much at all, but on Windows I use a program called net stumbler because my laptop maker didn't include an app like this for windows.

9

Angstrom & OpenZaurus / Sl5600 Oz 354 And Socket Low Power Wifi Cf?

« on: April 12, 2006, 11:47:55 am »

Bumping this post....
Does anyone have an idea??

10

Angstrom & OpenZaurus / Sl5600 Oz 354 And Socket Low Power Wifi Cf?

« on: April 07, 2006, 02:15:09 pm »

I tried putting this combination together and in opie the card configuration comes up and then after that the system locks up on the next thing I click on.  In gpe the system locks upon insertion of the card.  Is there something I'm missing in regards to wifi usage here?

I know the carfd works with stock 1.32 rom.

11

5x00 General discussions / Just Got A 5600. What's Best Rom

« on: April 06, 2006, 09:18:09 pm »

I just got a 5600 and am wondering what ROM's are floating around with what features.  So tell me, what ROM do you use and WHY.

Also, you can throw in What you use your 5600 for.

12

Angstrom & OpenZaurus / Oz & 5600 Wipe Out Games And Hancom Stuff?

« on: April 06, 2006, 06:00:04 pm »

If that puts it back to original state then great.  That way if I decide not to get the thing I can put it back to sharp rom and give it back to him none the wiser.  

13

Angstrom & OpenZaurus / Oz & 5600 Wipe Out Games And Hancom Stuff?

« on: April 06, 2006, 03:56:43 pm »

I was curious about when I install OZ.  Does it wipe out the original hancom and games and such?  as I like several of those games? 

If so, is there a way to get them back .  I want to know this as the poodle isn't mine yet but I want to try OZ on it.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=122092\"][{POST_SNAPBACK}][/a][/div]

The short answer is yes, it will wipe all of the Sharp Rom stuff off. Which Games are you pining for? A lot of them also exist in the OZ feeds.

As for the Hancom stuff, it won't run on OZ, but there are some possible replacements in the feeds.

Good luck,
[div align=\"right\"][a href=\"index.php?act=findpost&pid=122093\"][{POST_SNAPBACK}][/a][/div]

What I'm looking for is if I put OZ on the unit, how do I get it back to the original state if I decide I don't like OZ or I give it back to the guy?

14

Angstrom & OpenZaurus / Oz & 5600 Wipe Out Games And Hancom Stuff?

« on: April 06, 2006, 02:44:33 pm »

I was curious about when I install OZ.  Does it wipe out the original hancom and games and such?  as I like several of those games?  

If so, is there a way to get them back .  I want to know this as the poodle isn't mine yet but I want to try OZ on it.