Messages

1

Zaurus - pdaXrom / Suspend Problem!

« on: September 08, 2009, 09:14:21 am »

I'm using zaurus sl-c3000 with pdaxii13v2

Use the Pause button, and it not working as it should, to release 'the start button, it restarts, as if I were starting the zaurus. Another thing that happens and the zaurus should disconnect the battery charging when it was full, and that he did not do, is direct loading.

I do not know what is happening!

If anyone, knows and can help me.

Thank you!

2

Angstrom & OpenZaurus / Slc3k+angstrom-several Questions_soft_lan_usb_and_others!

« on: April 15, 2009, 06:48:47 pm »

    
Sorry! I forgot that great detail. Thanks for the answer anyway, certainly will be of much use.

My system Zaurus:

SL-C3000 Rom 1.11JP
Kernel v.2.6.2.4
OS-Angstrom - Opie v.1.2.3

Sorry if I forgot something again!

3

Angstrom & OpenZaurus / Slc3k+angstrom-several Questions_soft_lan_usb_and_others!

« on: April 15, 2009, 09:38:55 am »

Hello!   After several unsuccessful attempts to activate my usb devices, I decided to install another OS.

Now, I am with the Angstrom in its newer version. Once the start I fell in love with him, but I have several questions with respect to the OS.

System Details: SLC-3000 Angstrom (New Version)

Questions:

Basic:

What are the types of applications that can install in angstrom?

Where can I get them?

What are the essential package of applications of Angstrom?

Installed some applications, they have settled, but was not added any icon on the desktop! Why?

Advanced:

I am using Buffalo Wli-CF-S11G card to access internet, it was automatically detected, attempts to communicate (LED power and link active) but not with any response. Sender my WiFi and FON (La Fonera) 100% Ok! What may be happening?

Still can not activate the mouse, or rather active, but can not see the mouse pointer! I need to install a library of icon?

There is some automounter CF / SD / USB for Angstrom?

I doubt the extra! But any help will be welcome!  

Thank you very much!

4

C1000/3x00 Hardware / Sl-c3000 - Usb Not Working !

« on: April 02, 2009, 07:10:31 pm »

 Hello! UTX! Thanks for your help up here!
I am still looking for a solution to my problem.
If I can not, try other systems, such as Openzaurus or even OpenBSD.

Again.

Thank you!

You and all who tried to help me solve this problem!

5

C1000/3x00 Hardware / Sl-c3000 - Usb Not Working !

« on: April 01, 2009, 01:49:23 am »

        
Hello! UTX! Sorry for the delay in returning, I'm trying to understand what is happening with my Zaurus.

Following your tip, I did the following.

# rmmod - all
# lsmod - to list the modules loaded
# modprobe usb-ohci
modprobe: Can not locate module usb-ohci
# modprobe usb-uhci
modprobe: Can not locate module usb-uhci
# modprobe usbserial
modprobe: Can not locate module usbserial
# modprobe usb-storage
# modprobe usbcore

# lsmod - to see changes

Hey it seems that my problem eh just software, but I do not understand why it can not find the modules ohci, uhci, serial.

The following packages are installing:

usb-camera-modules-2.4.20
usb-network-modules-2.4.20
usb-storage-modules-2.4.20
ntfs-modules-2.4.20
zmouse-0.1
usbmgr-1.0.0-2
usbutils-0.11-1

This missing some module in the list?

Right now I'm looking for in net a script to mount the storage, and only because it seems that this ok!

I do not know how that mounts in the hand in zaurus!

6

C1000/3x00 Hardware / Sl-c3000 - Usb Not Working !

« on: March 30, 2009, 06:36:59 pm »

Hello! Friend! UTX, Thank you! For me return, and be willing to help me! I am answering your questions!



Please also explain, what are you trying to do. Are you trying to get USB host (to connect e. g. USB mouse, USB memory,...)?

Yes, I am trying to get USB host, for the following items: Mouse, Keyboard, Pen-drive, external HDD and WebCam.



Are you trying to get USB networking?

Not, I'm accessing the net, using a CF card Buffalo, Wli-CF-S11G, by the way this is working correctly.



Are you trying to connect your Zaurus as a mass strorage device to your computer?

Not, today, does not pay to do that!

 

7

C1000/3x00 Hardware / Sl-c3000 - Usb Not Working !

« on: March 30, 2009, 09:35:40 am »

Hello! Friends! Sorry if I am not explaining correctly.  

My Zaurus eh:
SL-C3000 ROM v.1.11 JP
Linux Kernel v.2.4.20
Qtopia v.1.5.4
Cacko 1-23 linux SLC3Kb1

The following modules were installed:
usb-camera-modules-2
usb-network-modules-2
usb-storage-modules-2
and
zmouse_0.1
auto-c3000_0
usbmgr-1.0.0-2
usbutils-0.11-1

Now removed "all 3 modules usb's." I test all the possible ways to meet the net.

Sorry for my ignorance, but I do not have good level of understanding unix, still have much to learn.[size="2"][/size]

8

C1000/3x00 Hardware / Sl-c3000 - Usb Not Working !

« on: March 29, 2009, 12:56:29 pm »

This is a log of the system, if someone can help me, telling me what is happening, I thank you ahead! Thank you very much!  

pxa_pcmcia_suspend(0)
monitor_hotplug: agent: usbd interface: monitor action: suspend
udc_disable: ep0_urb already NULL
udc_disable: ep0_urb already NULL
usbdcore: usbdcore 0.1 035 2002-06-12 20:00 exiting
monitor_pm_event: suspend finished (rc=0)
usbh: monitor_hotplug: agent: usbh interface: monitor action: suspend
usbh: monitor_pm_event: suspend finished (rc=0)
pxa_sd_wait_response: responce time out (cmd=07 MMC_STAT=0x2142)
pxa_pcmcia_suspend(1)
sharp_sl_nand_suspend
jack=0
resume virtual_wakeup_factor=00000000 (src=9801a003)
jack=0
resume virtual_wakeup_factor=00000000 (src=9801a003)
jack=0
resume virtual_wakeup_factor=00000000 (src=9801a003)
jack=0
resume virtual_wakeup_factor=00000001 (src=9801a003)
resume logical_wakeup_factor=00000001 (src=ae000019)
FCS : CCCR = 2000210
sharp_sl_nand_resume
pxa_pcmcia_init(0)
pxa_pcmcia_init(1)
new hp status=0
pxa_sd_wait_response: responce time out (cmd=52 MMC_STAT=0x2142)
pxa_sd_wait_response: responce time out (cmd=05 MMC_STAT=0x2142)
[SD]-clustsize = 10000
usbh: hotplug_schedule_bh: schedule bh
hotplug_schedule_bh: schedule bh
usbh: hotplug_bh:
usbh: udc_connected: ACTIVE_LOW: 0<7>usbh: monitor_connected: 0
usbh: monitor_restore: RESTORE_UNLOADED
usbh: monitor_hotplug: agent: usbh interface: monitor action: restore-unloaded
hotplug_bh:
monitor_connected: 1
monitor_restore: RESTORE_LOADED
monitor_hotplug: agent: usbd interface: monitor action: restore-loaded
pxa_pcmcia_suspend(0)
usbdcore: usbdcore 0.1 035 2002-06-12 20:00 (dbg="")
storage_fd: storage_fd 0.1 035 2002-06-12 20:00 (OUT=64,IN=64)
storage_fd: vendorID: 4dd productID: 9050
pxa27x_bi 0.1-alpha 035 2002-06-12 20:00 (dbg="")
bi_modinit: call udc_startup_events
bi_device_event: call udc_enable
bi_device_event: call udc_all_interrupts
udc_connect: usb-device is not active.

9

C1000/3x00 Hardware / Sl-c3000 - Usb Not Working !

« on: March 29, 2009, 12:41:52 pm »

Hello! UTX!   Really agree with you, no jumpers, after today's show, I was thinking of opening it, I decided to do it, and soon realized that there would be jumpers, at least that was done through activation of links in the circuit, another would be through of your NAND, I utima vizita the NAND, I understand, any reference configuration for USB, but I do not remember what it was! That my visit to the NAND, I could not prove the conclusion, the setting, it got a lock on the keyboard, when I gave a check in the system, and ended up losing the Zaurus motherboard which cost me $ 160.00 on a new motherboard! But do not discount the issue of the problem is the software! Know something about this reference to USB in NAND?[size="2"][/size]

10

C1000/3x00 Hardware / Sl-c3000 - Usb Not Working !

« on: March 28, 2009, 10:10:48 pm »

    
Hello! Speculatrix! I really agree with you, yesterday I called the repair center of SHARP in Nagoya, Japan. And the only thing I reported was that the models slcs this option would have been disabled! Unlike the standard export models. Is this true? I have my doubts! But the problem is that the USB, in the case of external peripherals nothing works, even trying to mount them! I am thinking of opening it to see if any jumper ah that enable it.

11

C1000/3x00 Hardware / Sl-c3000 - Usb Not Working !

« on: March 27, 2009, 09:30:41 pm »

Please! I have a problem with my Zaurus and already tried by all the posts and not found anything! I do not see the demand for more options! If not with people who understand him better! I noticed the same problem with the User evilsocket on 18 topics to be down! I am thinking of the sharp call to see if they know something about it! If someone can help me! I am very grateful! Thank you![size="3"][/size]