Messages

1

Angstrom & OpenZaurus / Problems With Sd Card On Collie (5500)

« on: March 17, 2005, 07:59:12 pm »

oh my bad.. well i am too ignorant to help, but at least this reply might bump your thread at the right time.. lol..
GL

2

Angstrom & OpenZaurus / Problems With Sd Card On Collie (5500)

« on: March 17, 2005, 04:56:25 pm »

not sure, but this thread might help here

3

Angstrom & OpenZaurus / Openzaurus 3.5.3 Pre-release

« on: March 14, 2005, 11:52:49 pm »

It's the latter. We need feedback about the current status of the ROM. It wouldn't make much sense to install old packages, would it?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=70708\"][{POST_SNAPBACK}][/a][/div]

well i have a good configuration right now, so i was basically wondering if i could link my already-installed-to-SD appz or if they would be incompatible.

nm.

4

Angstrom & OpenZaurus / Openzaurus 3.5.3 Pre-release

« on: March 14, 2005, 10:31:24 pm »

i will flash this and check it out, but i wonder first, can i install packages from 3.5.2 feeds? or is it what you see is what you get?

5

For Sale / Wanted / Sl5500 Must Sell

« on: March 13, 2005, 10:50:14 pm »

hey i just noticed you are in PDX! im in seattle! w00t
pm me if i can help you out with any software (purely to try-b4-j00-buy of course... i know this isnt a jaurez board)

<nudge nudge wink wink>

6

Angstrom & OpenZaurus / Sd Wifi Card?

« on: March 13, 2005, 10:34:58 pm »

Which device do you have?
[div align=\"right\"][{POST_SNAPBACK}][/a][/div]

its a WL11-SD

Is there any driver source available for this card? If not you may have to get hacking.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=70444\"][{POST_SNAPBACK}][/a][/div]

source? errr.. i have the driver disk.. and there are 2 drivers.. ppc2002(pocketpc) and ppc2003(windows mobile) are the respective folder names.. im hosting the manual and the driver installs [a href=\"http://www.nerdwarfare.com/WL11-SD]HERE[/url]
if you or anyone else wants to, or is willing to  take a look... but i dont think that they include the source...
ive been looking around the ambicom site, and they say that most of their cards work for nix with 3rd party drivers from sourceforge.. searched sourceforge with 0 results.. i emailed ambicom support and asked if the driver source code was available

i hope i can use this thing.. i got it for free from a friend.. and its hella cool

 i just read that thread.. bummer.. i have a 5500 guess im shit out of luck <sniff sniff>

7

For Sale / Wanted / Sl5500 Must Sell

« on: March 13, 2005, 10:03:13 pm »

are you saving to buy software or hardware?

8

Angstrom & OpenZaurus / Sd Wifi Card?

« on: March 12, 2005, 11:42:23 pm »

i just got an ambicom wl11-sd SD wifi card .. but it doesnt seem to be recognized within OZ... anyone know what steps i can take to get this thing working?

9

Angstrom & OpenZaurus / 512mb Sd (non)automount Using Hentges Rom

« on: March 11, 2005, 07:56:29 pm »

[/quote]
I found that OPIEDIR and QPEDIR are not set. But that's another thread.
                 mt
[div align=\"right\"][a href=\"index.php?act=findpost&pid=70324\"][{POST_SNAPBACK}][/a][/div]
[/quote]
i believe that is fixed by installing the service-release-1-oz.ipk from the upgrades feed

10

Angstrom & OpenZaurus / Hentges Rom

« on: March 10, 2005, 06:27:31 pm »

you can use the GUI "libraries" button in the settings tab, and then follow the prompts to the opera .desktop file,
or open up a concole window and run

Code: [Select]

makecompat operaor you can install mrSquishy's repack of 7.55 here
just be sure to follow the instructions

11

Angstrom & OpenZaurus / 512mb Sd (non)automount Using Hentges Rom

« on: March 09, 2005, 07:21:39 pm »

this info might help ya... i dunno.. but its worth a shot eh
multiple partitions on a cf/sd

12

Angstrom & OpenZaurus / 512mb Sd (non)automount Using Hentges Rom

« on: March 08, 2005, 09:50:29 pm »

ok well, it is kinda working..
it IS mounting the card at boot, but it is giving alot of output, and its not recognizing the correct partition size..
the partition is 512mb, and this can be seen thru fdisk -l and cfdisk /dev/mmcda

Code: [Select]

~# fdisk -l

Disk /dev/mmcda: 512 MB, 512229376 bytes
9 heads, 8 sectors/track, 13895 cylinders
Units = cylinders of 72 * 512 = 36864 bytes

     Device Boot      Start         End      Blocks   Id  System
/dev/mmcda1               1       13895      500216   83  Linux

Code: [Select]

  cfdisk 2.12

                             Disk Drive: /dev/mmcda
                         Size: 512229376 bytes, 512 MB
               Heads: 9   Sectors per Track: 8   Cylinders: 13895

    Name        Flags      Part Type  FS Type          [Label]        Size (MB)
 ------------------------------------------------------------------------------
    mmcda1                  Primary   Linux ext2                         512.23but when i type #df , it only tells me that there is 200 something..

Code: [Select]

/dev/mmcda1             236.4M     53.0M    171.2M  24% /media/cardi have attached a copy of the dmesg, so  you can see the output i was talking about..

13

Angstrom & OpenZaurus / 512mb Sd (non)automount Using Hentges Rom

« on: March 06, 2005, 11:14:27 pm »

thanks for taking the time to explain..
since i see you are on this board right now, i will go ahead and check things out, and edit this post in a few minutes with the outcome..

hrmm... well.. the sdcontrol worked.. but not during boot..

Code: [Select]

# /etc/sdcontrol insert

WARNING: Couldn't determine SD mount options from /etc/fstab, using defaults

Beginning SD auto-mount..:


WARNING: Trying failsafe partition mode


-> Valid SD partitions are: [mmcda1 mmcda2 mmcda3 mmcda4]

* * * * * Working on [/dev/mmcda1] * * * * *

-> Using mountpoint [/mnt/card] from fstab
-> Trying VFAT mount [noatime,sync,quiet,umask=000,iocharset=utf8]...
-> Trying ext2 mount [noatime,sync]...
-> EXT2 mount was successfull

* * * * * Working on [/dev/mmcda2] * * * * *

-> Using mountpoint [/media/card1]
-> Trying VFAT mount [noatime,sync,quiet,umask=000,iocharset=utf8]...
-> Trying ext2 mount [noatime,sync]...
-> EXT2 mount was successfull

* * * * * Working on [/dev/mmcda3] * * * * *

-> Using mountpoint [/media/card2]
-> Trying VFAT mount [noatime,sync,quiet,umask=000,iocharset=utf8]...
-> Trying ext2 mount [noatime,sync]...
/dev/mmcda3: Invalid argument
mount: you must specify the filesystem type
-> Trying failsafe mount...
/dev/mmcda3: Invalid argument
mount: you must specify the filesystem type

* * * * * Working on [/dev/mmcda4] * * * * *

-> Using mountpoint [/media/card3]
-> Trying VFAT mount [noatime,sync,quiet,umask=000,iocharset=utf8]...
-> Trying ext2 mount [noatime,sync]...
/dev/mmcda4: Invalid argument
mount: you must specify the filesystem type
-> Trying failsafe mount...
/dev/mmcda4: Invalid argument
mount: you must specify the filesystem type
ln: /home/samba/SD_Card: No such file or directory
mount:

Code: [Select]

# mount
/dev/root on / type jffs2 (rw)
proc on /proc type proc (rw)
ramfs on /dev type ramfs (rw)
tmpfs on /var type tmpfs (rw)
devpts on /dev/pts type devpts (rw)
/dev/mmcda1 on /media/card type ext2 (rw,sync,noatime)
/dev/mmcda2 on /media/card1 type ext2 (rw,sync,noatime)
Dmesg:

Code: [Select]

# dmesg | grep -i mmcda
 mmcda: mmcda1 mmcda2
 mmcda: mmcda1 mmcda2
 mmcda: mmcda1 mmcda2
 mmcda: mmcda1 mmcda2
 mmcda: mmcda1 mmcda2
 mmcda: mmcda1 mmcda2
 mmcda: mmcda1 mmcda2
 mmcda: mmcda1 mmcda2
 mmcda: mmcda1 mmcda2
 mmcda: mmcda1 mmcda2
 mmcda: mmcda1 mmcda2
 mmcda: mmcda1 mmcda2
 mmcda: mmcda1 mmcda2
 mmcda: mmcda1 mmcda2
 mmcda: mmcda1 mmcda2
 mmcda: mmcda1 mmcda2
 mmcda: mmcda1 mmcda2
 mmcda: mmcda1 mmcda2
 mmcda: mmcda1 mmcda2
 mmcda: mmcda1 mmcda2
 mmcda: mmcda1 mmcda2
sdcontrol compeject:

Code: [Select]

# /etc/sdcontrol compeject

WARNING: Couldn't determine SD mount options from /etc/fstab, using defaults

/etc/sdcontrol: 238: fuser: not found
rm: cannot remove `/home/samba/SD_Card': No such file or directory
/etc/sdcontrol: 238: fuser: not found
rm: cannot remove `/home/samba/SD_Card': No such file or directory
mount:

Code: [Select]

# mount
/dev/root on / type jffs2 (rw)
proc on /proc type proc (rw)
ramfs on /dev type ramfs (rw)
tmpfs on /var type tmpfs (rw)
devpts on /dev/pts type devpts (rw)

14

Angstrom & OpenZaurus / 512mb Sd (non)automount Using Hentges Rom

« on: March 06, 2005, 10:28:57 pm »

Here's an updated version which should correct most bugs introduced by the change from /mnt to /media. Please test.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=69523\"][{POST_SNAPBACK}][/a][/div]

so... its not an issue with size of the sd card, or manufacturer? rather, its an issue with the mountpoint? i dont follow how that would inhibit the card from being automounted..

15

Angstrom & OpenZaurus / 512mb Sd (non)automount Using Hentges Rom

« on: March 05, 2005, 11:36:38 pm »

I take it the "mount" command doesn't list mmcdaX mounted at /media/card, right?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=69431\"][{POST_SNAPBACK}][/a][/div]

Code: [Select]

/dev/root on / type jffs2 (rw)
proc on /proc type proc (rw)
ramfs on /dev type ramfs (rw)
tmpfs on /var type tmpfs (rw)
devpts on /dev/pts type devpts (rw)