1
5x00 General discussions / Howdy
« on: August 21, 2005, 09:44:09 pm »
Oh yeah, sorry I forgot you running Sharp ROM. So yeah, with the original ROM you can sync with Windows. I used too with no problems at all.
Select language:
News:
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
5x00 General discussions / Lost Links When Ejecting Sd Card
« on: August 20, 2005, 11:15:57 pm »Code: [Select]
ipkg-link mount /media/card/packages This should link everything that was linked before.
3
5x00 General discussions / Howdy
« on: August 20, 2005, 11:14:41 pm »
I'm not sure if you can use the zaurus to run applications like Office. However I do know you can use a pdf reader for e-books, xmms to play music and videos, Opera/Konqueror to surf the web and a few applications to check your email.
Again, I don't know if you will be able to sinc Outlook to your zaurus. Zaurus is *nix based system and you might know that Outlook runs on Win 32 based systems. So you might find some incompatibility there.
Good luck and post updates.
Ahh, about a ROM, I think Opie will suit your needs.
Again, I don't know if you will be able to sinc Outlook to your zaurus. Zaurus is *nix based system and you might know that Outlook runs on Win 32 based systems. So you might find some incompatibility there.
Good luck and post updates.
Ahh, about a ROM, I think Opie will suit your needs.
4
Software / Opera Issues
« on: August 20, 2005, 10:53:48 pm »
Redownload Opera and give another try.
I'm running Konqueror on my 5500 without any problems.
I'm running Konqueror on my 5500 without any problems.
5
General Discussion / How To Write File From Windows Pc To An Ext2 Sd
« on: July 28, 2005, 10:25:55 pm »
Thanks lardman, however the commands I know, but I can't execute none of them.
Perhaps I have to configure something, don't I?
Here is some output:
Perhaps I have to configure something, don't I?
Here is some output:
Quote
220 Qtopia 1.2.0 FTP Server
USER root
331 User name ok, need password
PASS rootme
230 User logged in, proceed
cd
502 Command not implemented
cd /
502 Command not implemented
cd /root
502 Command not implemented
get kismet.conf
502 Command not implemented
get kismet.conf
502 Command not implemented
cd root
502 Command not implemented
cd /root
502 Command not implemented
6
General Discussion / How To Write File From Windows Pc To An Ext2 Sd
« on: July 26, 2005, 11:02:44 pm »
Finally I got to connect to the FTP server, however it seems that no commands are enabled.
No "ls", nothing. Not even help to see the commands that I can use.
Any tips on that? And how can I put files into my zaurus and copy from it?
Thanks.
No "ls", nothing. Not even help to see the commands that I can use.
Any tips on that? And how can I put files into my zaurus and copy from it?
Thanks.
7
Software / Wellenrieter+3100
« on: July 26, 2005, 10:39:48 pm »
802.11b (eth0) 192.168.1.103
I'm using DHCP. so my wireless router releases the IP.
On Wireless Configuration I have:
General Tab:
Mode: managed
SSID: my router's connection name
MAC: my zaurus mac address
Encryption Tab:
Key1: I have the key generated by my router.
Non ecrypted packets: Accept
TCP/IP Tab:
DHCP enabled
Anyway, I don't think these settings matter, becasue when you use Wellenreiter, it asks you to disable DHCP(if you have running). So you don't actually use any of those settings from your Network Settings Tab.
And once you close Wellenreiter, it says "your wireless card should be usable again".
I'm using DHCP. so my wireless router releases the IP.
On Wireless Configuration I have:
General Tab:
Mode: managed
SSID: my router's connection name
MAC: my zaurus mac address
Encryption Tab:
Key1: I have the key generated by my router.
Non ecrypted packets: Accept
TCP/IP Tab:
DHCP enabled
Anyway, I don't think these settings matter, becasue when you use Wellenreiter, it asks you to disable DHCP(if you have running). So you don't actually use any of those settings from your Network Settings Tab.
And once you close Wellenreiter, it says "your wireless card should be usable again".
8
Software / Cracking Wep
« on: July 25, 2005, 11:51:19 pm »Quote
Belive me, if my condo's neighboors knew about mac authentication, then they would for sure enable wep on ther home routers.QuoteYeah, I have wellenreiter and Kismet. Both running like a charm.
It's weird that sometimes I try to connect to a network that wellenreiter found (keyless) and my Network Application can't connect to it.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=89029\"][{POST_SNAPBACK}][/a][/div]
Man I hope you're not in the states... Anyway wep or wpa isn't the only security measure on wireless networks. They could also be using a captive portal network, or mac authintication.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=89040\"][{POST_SNAPBACK}][/a][/div]
9
Software / Wellenrieter+3100
« on: July 25, 2005, 11:42:52 pm »
I'm running Wellenreiter in my zaurus with no problems whatsoever.
10
Software / Cracking Wep
« on: July 21, 2005, 09:08:25 am »
Yeah, I have wellenreiter and Kismet. Both running like a charm.
It's weird that sometimes I try to connect to a network that wellenreiter found (keyless) and my Network Application can't connect to it.
It's weird that sometimes I try to connect to a network that wellenreiter found (keyless) and my Network Application can't connect to it.
11
General Discussion / How To Write File From Windows Pc To An Ext2 Sd
« on: July 20, 2005, 10:36:20 pm »
Ok, I can use raw connections on my Putty to access port 4242 on my zaurus. However it won't let me login.
Also, when I scan my zaurus for open ports, I don't get port 4242 as open. Is that right?
Also, when I scan my zaurus for open ports, I don't get port 4242 as open. Is that right?
12
General Discussion / How To Write File From Windows Pc To An Ext2 Sd
« on: July 19, 2005, 11:23:24 pm »
This is what I got:
Quote
root@collie:/# ipkg list '*sftp*'
openssh-sftp - 4.0p1-r1 - Secure rlogin/rsh/rcp/telnet replacement (OpenSSH) Ssh (Secure Shell) is a program for logging into a remote machine and for ex
vsftpd - 2.0.1-r1 - Secure ftp daemon
Quote
root@collie:/# ipkg list '*scp*'So pure-ftpd is not secure?
openssh-scp - 4.0p1-r1 - Secure rlogin/rsh/rcp/telnet replacement (OpenSSH) Ssh (Secure Shell) is a program for logging into a remote machine and for ex
13
General Discussion / Weird Portmap Errors When I Install
« on: July 19, 2005, 10:38:33 pm »
Taken from IronGeek website:
Quote
If you get tired of seeing portmap error use the following command to get rif of portmap:
ipkg remove portmap
14
General Discussion / How To Write File From Windows Pc To An Ext2 Sd
« on: July 17, 2005, 10:34:24 pm »
I found this:
I was wondering if I can run a FTP server on my Zaurus.
Quote
kernel-module-ip-conntrack-ftp - 2.4.18-rmk7-pxa3-embedix-r18 - ip-conntrack-ftp kernel moduleI don't want a FTP client. I can just use tftp(busybox) to transfer files.
kernel-module-ip-nat-ftp - 2.4.18-rmk7-pxa3-embedix-r18 - ip-nat-ftp kernel module
lftp - 3.0.11-r1 - lftp is a sophisticated command line based file transfer program. Supported protocols include FTP, HTTP, and FISH.
ncftp - 3.1.8-r0 - A sophisticated console ftp client
netkit-ftp - 0.17-r0 - netkit-ftp includes a commandline ftp client.
netkit-tftp - 0.17-r0 - netkit-tftp includes a commandline tftp client.
obexftp - 0.10.3-r0 - OBEX Ftp Client
openssh-sftp - 4.0p1-r1 - Secure rlogin/rsh/rcp/telnet replacement (OpenSSH) Ssh (Secure Shell) is a program for logging into a remote machine and for ex
opie-ftp - 1.2.0-r0 - Opie-Ftp
I was wondering if I can run a FTP server on my Zaurus.
15
Security and Networking / What Is The Best Wireless Cf Card For Sl-5500
« on: July 17, 2005, 09:28:17 pm »
Spectrum24 High Rate (Symbol). Works like a charm.