Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - Ling

Pages: [1] 2 3
1
Ubuntu / Help Installing Zubuntu 2.0 On Sl-c3200
« on: September 27, 2009, 02:34:44 pm »
I was able to get Zubuntu running from my SD card. Two problems so far:

1) A lot of key bouncing, meaning duplicate characters. Can I adjust this?
2) I can't get a wlan card to work with dhcp. I am trying my Linksys 802.11b cf card (WCF12) working. Flashing lights, but no networks in wicd and no IP address. I tried editing /etc/network/interfaces and adding my gateway and essid. I have fooled with ifconfig and iwconfig, but no joy. I tried setting wicd to use wlan0 and wifi0 both of which show via dmesg. I also found the post about changing permissions on dhcp in /etc/password to '0'. Cortez said it was verified as working so I must be missing something.

Any ideas.

2
Zaurus - pdaXrom / Supported Usb Lan Dongle
« on: March 25, 2007, 07:35:10 am »
Can anyone recommend an inexpensive USB LAN adapter that will work with pdaXrom/ii13? I want one that is supported in both the 2.4 and 2.6 versions. Smarter folks that I have tried to get the driver for my DM9601-based adapter working with no luck. I thought with the manufacturer providing linux drivers it would be easier, but obviously not. I would like to get a working USB LAN adapter before my next trip. Thanks.

3
Zaurus - pdaXrom / Setting Up A Usb Nic
« on: March 10, 2007, 05:46:31 pm »
Meanie was good enought to compile the driver for my DM9601 based USB NIC. I have not set one up before. I imagine that I need to copy the driver to the appropriate location, then I think I need to add an entry to the file that lists all the NIC types to tell it to use my dm9601.0 driver for that type of nic. Help.

4
Site Suggestions, Requests, and Updates / New Zaurus Forums
« on: March 04, 2007, 11:18:53 am »
In an effort to get us back to discussion, I have created a new forum with similar structure at:

http://zaurus.freeforums.org

Don't want to start a food fight and not interested in competition, just tired of no discussion and no updates. You can also check out the discussion at Antikx site at:

http://www.tyrannozaurus.com

Have a good weekend.

5
Zaurus - pdaXrom / Pdaxii13 5.3 Ans Usb Keyboard
« on: February 19, 2007, 08:08:46 pm »
Just like the scroll mouse, I know my Fellowes USB stowaway keyboard was working. Before I just plugged it in. I tried the USB Keyboard app under system settings and it doesn't seem to do anything. Is there any way tomake it work?

** Hello, anyone? Do you know how to make the USB keyboard work?

6
Zaurus - pdaXrom / Xfce Under Pdaxii13 5.3 Anyone?
« on: February 19, 2007, 07:32:16 am »
Looks like IceWM takes a bit too much tweaking. I tried running startxfce and actually got xfce running, but it was rotated and out of whack. If you are running xfce with pdaXii13, I would appreciate your sharing your configuration and what is working/not working. Thanks.

7
Zaurus - pdaXrom / Pdaxii13 5.3 - Usb Mouse Scroll Wheel?
« on: February 18, 2007, 11:50:42 am »
I thought that this was working previously. Maybe I am thinking of another version/distro. I am trying to get my Z set up as my traveling machine and this would be helpful.

8
Zaurus - pdaXrom / Pdaxii13 5.3 - No Right Click/tap
« on: February 18, 2007, 11:06:39 am »
I can't seem to right out how to right click/tap with the stylus. i thought that I held the alt key (the one to the right of the Ctrl key) and tapped and that gave me a right click. However, no joy. I have restarted X and rebooted, but still no joy. When I plug in my USB mouse, right click works. Any ideas?

9
Accessories / Video Scan Device
« on: February 11, 2007, 10:15:43 am »
I am wondering if some posts/threads were lost in the recent upgrades. I was pretty sure that within the last few weeks we discussed a device that laid over the screen and scanned the screen to TV. I think it was intended for PS2 or Nintendo. Seems like Antikx was in on the discussion. I have searched with every combination I can think of and looked through the folders, but no go. If it is still here and someone would provide a link, I would appreciate it. Thanks.

10
Zaurus - pdaXrom / X11vnc Gui W/ Pdaxii13 5.2
« on: January 20, 2007, 10:47:27 am »
I can run x11vnc from the command line and it works. When I use the x11vnc control gui and select start x11vnc, a terminal window labeled passwd pops up and then nothing, I can't connect. I assume that I need to do some configuration somewhere. How? Thanks.

11
Off Topic forum / Did Anyone Else Lose Money To Bitpass?
« on: January 20, 2007, 10:07:26 am »
I got an email from them saying they were going out of business and that I had a week to make purchases and clean out my account. When I signed I found that last month they charged an "account maintenance fee" that cleaned out my account. Looks like a sinking ship taking all they can get. Anyone else get similarly stuck?

12
Zaurus - pdaXrom / Pdaxii13 And Nfs
« on: January 15, 2007, 09:00:02 pm »
The only NFS package I found in the default feed was nfs-utils. I installed it, but still can't connect to an nfs share. I used the same fstab line as is working in my other boxes, but when I issue mount -a, it hangs forever. No errors, but no drive mapping either. Do I need another package or is this one not working? Thanks.

13
Zaurus - pdaXrom / Udav Support In Pdaxrom?
« on: January 06, 2007, 01:12:00 pm »
I picked up a usb nic. When plugged in to the usb host, lsusb says:

oa46:9601 Davicom Semiconductor, Inc.

A little research says that this is a Davicom DM9601 device and is supported on the Z with OpenBSD using the udav driver. Is there a way to get udav support into pdaXrom? I looked in the file listing from the community page and didn't see anything. I have done some googling, but can't find any references other than openbsd. I probably should have done more research before I bought. Any assistance is appreciated.

14
Zaurus - pdaXrom / Gpe-contacts + Import = Seg Fault
« on: January 02, 2007, 09:37:18 pm »
Like the subject says, I have installed gpe-contacts (and calendar, etc) and gotten it to run. However, when I tap the Import button, it seg faults and crashes. Is there a fix?

15
Site Suggestions, Requests, and Updates / Old Posts Don't Load
« on: January 01, 2007, 02:18:45 pm »
I am having a lot of timeouts when trying to load the older posts (6 months or more). Thanks.

Pages: [1] 2 3