Topics

1

Sharp ROMs / Gpsdrive On Pdaxqtrom

« on: September 21, 2006, 07:26:37 am »

I'm running the latest version of pdaxqtrom on a C3000 running Cacko rom beta. For the most part it appears to be working well. I've trying to use gpsdrive with my garmin gps. When the gpsdrive app starts up the screen size is much bigger than the physical screen and hence not all the screen is visible. I haven't found a setting to change this behavior. Other apps i.e abiword, etc display with the window maximized within the physical screen.
Another problem I have is when I start gpsd from within gpsdrive it doesn't appear to start gpsd and hence I have no communication with the gps. I have qpeqps running under qtopia, it starts gpsd and communites with the gps unit without a problem.
Any thoughts?
Thanks,
 Randy

2

Sharp ROMs / Cacko 1.23 For The C3000 (spitz)

« on: August 03, 2006, 07:00:57 am »

I remember reading a month or so ago about a release of Cacko 1.23 for the C3000. I believe Anton was going to work on it after release the 3200 version. I haven't seen anything posted relative to this so I was just wondering what the status was and if we could expect seeing a release in the near future.
Thanks,
 Randy

3

Angstrom & OpenZaurus / Suspend Problem With 3.5.4.1 On C3000

« on: July 18, 2006, 07:28:55 am »

I've recently moved from Cacko to the new OZ release (3.5.4.1) for the Spitz. I'm running the Opie Rom and have been experiencing a problem where I can not resume after a suspend. You press the power button but the screen remains blank I do see lights flashing on my bluetooth usb dongle but that's it. The only way to recover is to removing the battery and reboot with the power cord connected.

I did some testing and the suspend / resume seems to work okay so long as the power cord is connected to the Z. I did noticed the following message with dmesg.
hci_usb 1-2:1.0:no suspend for driver hci_usb

If I suspend with power connected and then remove power and resume it does resume but a few seconds (maybe 15) later the screen goes dark and I can't get it to come alive with out removing the battery. Even plugging in the a/c connection has no effect (charging light doesn't even come on unless you reset).

I've seen resports of similar problems but no solutions. Should I enter this as a problem on the bugtracker?

Thanks,
 Randy

More investigation has indicated that this behavior is independent of my usb bluetooth dongle. I removed the dongle and suspended while on battery power. I then resumed and it came back to life. I closed the lid put it down, a minute later picked it up and trying to power it on and no response. It was back to removing the battery and connecting the power cable. Seems the only mode this works in is with the power cord connected

4

Angstrom & OpenZaurus / Opie Hentges Rom

« on: July 08, 2006, 07:55:46 am »

I only see a GPE Hentges image for the new OZ 3.5.4.1 for the Spitz.
Is there an OPIE image available?

Thanks,
Randy