Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - mowgly

Pages: [1]
C1000/3x00 Hardware / My C3000 Won't Start
« on: April 16, 2009, 02:08:36 pm »
I forgot to answer and yes that was a NAND issue, that's now working my debian is installed I now have some CF Wifi problem but that's an hardware problem.

Anyway thank you.

Ps : I didn't know for the manual charging, thanks.

C1000/3x00 Hardware / My C3000 Won't Start
« on: April 14, 2009, 05:44:39 pm »
Thank you for your replies.

The Fn + D + M combination works, the D + M doesn't and the one I need OK + ON doesn't as well.

My SD is ready but i can't reach the Maintenance Menu (OK + ON). The thing is that if my battery has been charged, how ? I mean when i go to the Diagnostics Menu it shows Charge : OFF and my Charging Led is off, of course.

Any idea about that ?

Note that i have 2 batteries, and the same symptoms happen for both of them.

C1000/3x00 Hardware / My C3000 Won't Start
« on: April 13, 2009, 06:59:17 am »

Be sure that i read a lot of topics here about C3000 troubleshootings and key combinations.

I own a C3000 for 3 years now and i might have used it just a week, having a bunch of different problems.

The first thing i did when i owned it was to plug a custom AC adapter without taking care of the polarity, then i burned the charging circuit (i guess). Symptoms are : Z is working but only when it's plugged, the battery can handle 30 minutes max i would say.

So every 10 months when i decide to heal my Z i can't remember what was the key combination which makes my Z start, fighting for hours i finally understand that my battery has to be charged for a few hours for the Z being able to understand something (am i wrong ?).

Now my battery is kind of charging for a few hours and i can't make my Z work, the only thing which makes it react is [D] + [C] + Reset then both leds are blinking.

I tried all the key combinations of the wiki but still others parameters can interfere in the debugging process, so what i expect from you is just to guide me : tell me what keys to press, what things to check and then we can maybe find out what the problem is (if you don't already know).

Ps : How much a charger for these batteries cost and has anyone replaced fuse(s) in a C3000 ?

Thank you.

C1000/3x00 General discussions / Wifi Reconnection
« on: April 08, 2007, 02:33:11 pm »

I'm using a CF Wifi to reach the net with my Z, so I boot my PDAxrom : all is ok, my Host AP is detected, internet works.

But, when the Z is suspending, or when I unplug/replug my CF, the wireless monitor says that the Z is linked to the network "Unknown" which doesn't let me go on the net... However, the good network is detected with a "iwlist wlan0 scanning" even if the Z can't be linked to it.

I solve the problem by rebooting my Z but it's very unconvenient

If someone has a solution, I'll listen you and let you go on my Zaurus through VNC if you are motivated

Thank you

C1000/3x00 Hardware / Battery Dead ?
« on: March 30, 2007, 06:02:15 am »
Ok, I've bought a new battery but I don't want to burn it again with a polarity problem, is my polarity --> -o)+ <-- ok ?

C1000/3x00 Hardware / Battery Dead ?
« on: March 20, 2007, 05:10:46 am »

My zaurus C3K has a very bad autonomy, something like an hour... In fact when I received it, the Z didn't want to turn on, so I've changed my power supply polarity.

The problem is that I've heard that the Zaurus doesn't have polarity protection.

On my battery it's written "3.7V" and my adapter was set on 4.5V until now.
My actual polarity is -o)+.

Is it bad ?

Thank you

Zaurus - pdaXrom / Gpflash Install
« on: September 16, 2006, 08:52:17 pm »

I am trying to install gplflash as a Firefox plugin but after an 'ipkg install gplflash' this message appears :

"Installing gplflash...rm: cannot remove `/home/root/.mozilla/firefox/pluginreg.dat': No such file or directory"

I have a C3000 on Pdaxrom beta2
I tried the install with firefox 1.5 an 1.0.6

Thank you

C1000/3x00 General discussions / File:systc300.dbk Not Exist File
« on: June 16, 2006, 06:00:50 pm »
My slackware distro has been killed last day. So I have installed 'windows 98' (what an OS !) and format the SD = Now it works

Thanks for your support.

General Discussion / Combo Ok + On
« on: June 12, 2006, 08:42:10 pm »
omg it works !

I think I am stupid and i don't know how to push a button

General Discussion / Combo Ok + On
« on: June 12, 2006, 08:39:34 pm »
I just have the Power LED and yes my battery cover was locked.

General Discussion / Combo Ok + On
« on: June 12, 2006, 07:37:21 pm »

I've followed a tutorial to install the PdaX rom on my C3000 but at the 7th step :

7) Press the “OK” key and keep it pressed while pressing the “On/Off” button on the front side.

It doesn't work, I made the combo but nothing appear.
What can I do ?  

C1000/3x00 General discussions / File:systc300.dbk Not Exist File
« on: June 11, 2006, 06:44:09 pm »
Thanks for your quick answer.

I have a 256MB 'Dane-elec' SD card !

I'll add that when i format my SD I have this message :

Code: [Select]
Calling ioctl() to re-read partition table.

WARNING: Re-reading the partition table failed with error 22: Invalid argument.
The kernel still uses the old table.
The new table will be used at the next reboot.

C1000/3x00 General discussions / File:systc300.dbk Not Exist File
« on: June 11, 2006, 02:07:25 pm »

My zaurus can't be turned on, so I decided to put the original rom 'sysc300.dbk'.
I've put the file on a SD formatted in FAT16, then plugged it into my zaurus and finally clicked on 'NAND Flash Restore' in the 'Diagnostic Menu', the same message appear :

'NAND Restore from SD
not exist file'

What can i do    ?

EDIT : Someone who had the same problem has solved it by changing his SD format from 'fat32' to 'fat', but I am in FAT16 and it still doesn't work.

Pages: [1]