Messages

1

C1000/3x00 General discussions / All The Original Files On The C3200 Internal Drive

« on: February 19, 2008, 08:26:58 am »

actually its all in a 70k zip file

http://trisoft.de/en_c3200howto.htm
scroll down to "Restore the harddisk"

instructions are inside the zip file.

2

C1000/3x00 Hardware / Dead C3200 :(

« on: February 19, 2008, 04:09:07 am »

also it says its looking for SYSC3200.DBK when infact the file name should be SYSC320.DBK

that one caught me out for a while.

3

Angstrom & OpenZaurus / Oe Glib-2.0-native Problem

« on: February 17, 2008, 05:26:31 pm »

great work. are you able to write a bitbake recipe?

no idea.
the entirety of my compiling skills is ./configure and make

4

Angstrom & OpenZaurus / Oe Glib-2.0-native Problem

« on: February 17, 2008, 09:47:57 am »

yay got rt73-k2wrlz-2.0.1 compiled, installed and it works fine o/

p.s.
no replies to my post on angstrom-devel

5

Angstrom & OpenZaurus / Oe Glib-2.0-native Problem

« on: February 17, 2008, 08:56:03 am »

after much googleing and luck it looks like i've got it working now, decided to start from scratch in a fresh ubuntu gutsy install in vmware.
pretty much all of the problems i had was figuring out dependancys OE needed which don't seem to be listed including one accident where installing kfind apparently added the app or library my current OE sticking point was.
another was qemu-native failing to compile which was solved by just installing it from repos and adding one line to local.conf.
its still downloading and compiling away so fingers crossed.


so the angstrom and OE setup instructions are very basic.

6

Angstrom & OpenZaurus / Oe Glib-2.0-native Problem

« on: February 16, 2008, 02:07:54 pm »

ok sent to devel list, though please be gentle i'm not a developer only building this becouse no one it seems wanted to reply to my request of building rt73-k2wrlz on the devel or user list.

7

Angstrom & OpenZaurus / Oe Glib-2.0-native Problem

« on: February 16, 2008, 10:18:12 am »

been trying all morning to get this to work but no luck
host machine is ubuntu gutsy x86
target is Zaurus C3200 spitz

Code: [Select]

moon@sakura:~/OE/build$ bitbake base-image
NOTE: Handling BitBake files: \ (4965/4965) [100 %]
NOTE: Parsing finished. 4739 cached, 0 parsed, 226 skipped, 0 masked.
NOTE: build 200802161508: started

OE Build Configuration:
BB_VERSION     = "1.8.8"
OE_REVISION    = "ae6e884558b73791ef6c6aa8d6c2dff00277dfdc"
TARGET_ARCH    = "arm"
TARGET_OS      = "linux-gnueabi"
MACHINE        = "spitz"
DISTRO         = "angstrom"
DISTRO_VERSION = "2007.12-r4"
TARGET_FPU     = "soft"

NOTE: Resolving missing task queue dependencies
NOTE: Preparing runqueue
NOTE: Executing runqueue
NOTE: Running task 190 of 1353 (ID: 1027, /home/moon/OE/org.openembedded.angstrom-2007.12-stable/packages/glib-2.0/glib-2.0-native_2.12.4.bb, do_compile)
NOTE: Running task 191 of 1353 (ID: 922, /home/moon/OE/org.openembedded.angstrom-2007.12-stable/packages/python/python-native_2.5.1.bb, do_patch)
NOTE: package glib-2.0-native-2.12.4: started
NOTE: package glib-2.0-native-2.12.4-r1: task do_compile: started
NOTE: package python-native-2.5.1: started
NOTE: package python-native-2.5.1-ml1: task do_patch: started
NOTE: Applying patch 'bindir-libdir.patch'
NOTE: Applying patch 'cross-distutils.patch'
ERROR: function do_compile failed
ERROR: log data follows (/home/moon/OE/build/tmp/angstrom/work/i686-linux/glib-2.0-native-2.12.4-r1/temp/log.do_compile.27152)
| NOTE: make -j4
| make  all-recursive
| make[1]: Entering directory `/home/moon/OE/build/tmp/angstrom/work/i686-linux/glib-2.0-native-2.12.4-r1/glib-2.12.4'
| Making all in .
| make[2]: Entering directory `/home/moon/OE/build/tmp/angstrom/work/i686-linux/glib-2.0-native-2.12.4-r1/glib-2.12.4'
| make[2]: Nothing to be done for `all-am'.
| make[2]: Leaving directory `/home/moon/OE/build/tmp/angstrom/work/i686-linux/glib-2.0-native-2.12.4-r1/glib-2.12.4'
| Making all in m4macros
| make[2]: Entering directory `/home/moon/OE/build/tmp/angstrom/work/i686-linux/glib-2.0-native-2.12.4-r1/glib-2.12.4/m4macros'
| make[2]: Nothing to be done for `all'.
| make[2]: Leaving directory `/home/moon/OE/build/tmp/angstrom/work/i686-linux/glib-2.0-native-2.12.4-r1/glib-2.12.4/m4macros'
| Making all in glib
| make[2]: Entering directory `/home/moon/OE/build/tmp/angstrom/work/i686-linux/glib-2.0-native-2.12.4-r1/glib-2.12.4/glib'
| make  all-recursive
| make[3]: Entering directory `/home/moon/OE/build/tmp/angstrom/work/i686-linux/glib-2.0-native-2.12.4-r1/glib-2.12.4/glib'
| Making all in libcharset
| make[4]: Entering directory `/home/moon/OE/build/tmp/angstrom/work/i686-linux/glib-2.0-native-2.12.4-r1/glib-2.12.4/glib/libcharset'
| make[4]: Nothing to be done for `all'.
| make[4]: Leaving directory `/home/moon/OE/build/tmp/angstrom/work/i686-linux/glib-2.0-native-2.12.4-r1/glib-2.12.4/glib/libcharset'
| make[4]: Entering directory `/home/moon/OE/build/tmp/angstrom/work/i686-linux/glib-2.0-native-2.12.4-r1/glib-2.12.4/glib'
| if /bin/bash ../i686-linux-libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -DG_LOG_DOMAIN=\"GLib\" -DG_DISABLE_CAST_CHECKS -DG_DISABLE_ASSERT -DG_DISABLE_CHECKS -DG_DISABLE_DEPRECATED -DGLIB_COMPILATION   -isystem/home/moon/OE/build/tmp/angstrom/staging/i686-linux/include -pthread  -isystem/home/moon/OE/build/tmp/angstrom/staging/i686-linux/include -Os -Wall -MT gconvert.lo -MD -MP -MF ".deps/gconvert.Tpo" -c -o gconvert.lo gconvert.c; \
|       then mv -f ".deps/gconvert.Tpo" ".deps/gconvert.Plo"; else rm -f ".deps/gconvert.Tpo"; exit 1; fi
|  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -DG_LOG_DOMAIN=\"GLib\" -DG_DISABLE_CAST_CHECKS -DG_DISABLE_ASSERT -DG_DISABLE_CHECKS -DG_DISABLE_DEPRECATED -DGLIB_COMPILATION -isystem/home/moon/OE/build/tmp/angstrom/staging/i686-linux/include -pthread -isystem/home/moon/OE/build/tmp/angstrom/staging/i686-linux/include -Os -Wall -MT gconvert.lo -MD -MP -MF .deps/gconvert.Tpo -c gconvert.c  -fPIC -DPIC -o .libs/gconvert.o
| gconvert.c:48:2: error: #error GNU libiconv not in use but included iconv.h is from libiconv
| gconvert.c:92: warning: 'visibility' attribute ignored on non-class types
| make[4]: *** [gconvert.lo] Error 1
| make[4]: Leaving directory `/home/moon/OE/build/tmp/angstrom/work/i686-linux/glib-2.0-native-2.12.4-r1/glib-2.12.4/glib'
| make[3]: *** [all-recursive] Error 1
| make[3]: Leaving directory `/home/moon/OE/build/tmp/angstrom/work/i686-linux/glib-2.0-native-2.12.4-r1/glib-2.12.4/glib'
| make[2]: *** [all] Error 2
| make[2]: Leaving directory `/home/moon/OE/build/tmp/angstrom/work/i686-linux/glib-2.0-native-2.12.4-r1/glib-2.12.4/glib'
| make[1]: *** [all-recursive] Error 1
| make[1]: Leaving directory `/home/moon/OE/build/tmp/angstrom/work/i686-linux/glib-2.0-native-2.12.4-r1/glib-2.12.4'
| make: *** [all] Error 2
| FATAL: oe_runmake failed
NOTE: Task failed: /home/moon/OE/build/tmp/angstrom/work/i686-linux/glib-2.0-native-2.12.4-r1/temp/log.do_compile.27152
NOTE: package glib-2.0-native-2.12.4-r1: task do_compile: failed
ERROR: TaskFailed event exception, aborting
NOTE: package glib-2.0-native-2.12.4: failed
ERROR: Build of /home/moon/OE/org.openembedded.angstrom-2007.12-stable/packages/glib-2.0/glib-2.0-native_2.12.4.bb do_compile failed
ERROR: Task 1027 (/home/moon/OE/org.openembedded.angstrom-2007.12-stable/packages/glib-2.0/glib-2.0-native_2.12.4.bb, do_compile) failed
NOTE: Waiting for 1 active tasks to finish
NOTE: 1: /home/moon/OE/org.openembedded.angstrom-2007.12-stable/packages/python/python-native_2.5.1.bb, do_patch (27153)
NOTE: Applying patch 'dont-modify-shebang-line.patch'
NOTE: Applying patch 'default-is-optimized.patch'
NOTE: package python-native-2.5.1-ml1: task do_patch: completed
NOTE: package python-native-2.5.1: completed
NOTE: Tasks Summary: Attempted 189 tasks of which 189 didn't need to be rerun and 1 failed.
ERROR: '/home/moon/OE/org.openembedded.angstrom-2007.12-stable/packages/glib-2.0/glib-2.0-native_2.12.4.bb' failed
moon@sakura:~/OE/build$
any ideas?

8

Sharp ROMs / Hostap Drivers 0.4.9 With Packet Injection

« on: January 28, 2008, 02:30:30 pm »

did this shared library problem get resolved?

9

C1000/3x00 General discussions / Thinking Of Trying Angstrom

« on: January 26, 2008, 08:26:29 am »

decided to install it this morning, had a few problems with Cf wifi.
i could connect but no response from ping, i had a guess all the usb net interfaces were the cause of my problems so removed them in the network tool and all is working.

10

C1000/3x00 General discussions / Thinking Of Trying Angstrom

« on: January 25, 2008, 06:11:10 pm »

thinking of trying Angstrom.
any spitz owners have any opinion on the state of it atm compared to pdaXrom?

11

Deals and Great Z Buys / Socket Bluetooth Cf Revision K On Ebay

« on: August 19, 2007, 04:20:17 am »

i bought a Belkin CF F8T020 ver.2 new for £25 on amazon works fine in with pdaxii3.
http://www.amazon.co.uk/exec/obidos/ASIN/B...7043125-9102358

12

Zaurus - pdaXrom / Skipstone As An Alternative Web Browser ?

« on: July 16, 2007, 04:34:23 pm »

anyone tried building this?

13

Zaurus - pdaXrom / Pidgin

« on: July 06, 2007, 09:49:31 am »

2.0.2-1 worked for me.

14

Zaurus - pdaXrom / Pidgin

« on: July 03, 2007, 10:51:08 am »

see the new package announcement thread. i compiled a pidgin 2.0.2 for stock beta3 which requires no package upgrades and also pdaXii13...
[div align=\"right\"][a href=\"index.php?act=findpost&pid=164186\"][{POST_SNAPBACK}][/a][/div]

get this when i run that version

Code: [Select]

root-:) pidgin
Pidgin has segfaulted and attempted to dump a core file.
This is a bug in the software and has happened through
no fault of your own.

If you can reproduce the crash, please notify the developers
by reporting a bug at:
http://developer.pidgin.im/newticket/

Please make sure to specify what you were doing at the time
and post the backtrace from the core file.  If you do not know
how to get the backtrace, please read the instructions at
http://developer.pidgin.im/wiki/GetABacktrace

If you need further assistance, please IM either SeanEgn or
LSchiere (via AIM).  Contact information for Sean and Luke
on other protocols is at
http://developer.pidgin.im/wiki/DeveloperPages
H Aborted
root-:)

15

Off Topic forum / Downloading Attachment Files From Oesf Forum

« on: May 24, 2007, 09:44:11 am »

its a forum problem right click and use "save as", it will be probably named as a php file but just rename to what it should be and it will be fine.