1
C1000/3x00 General discussions / Announcing Zgrom 0.1
« on: December 16, 2012, 04:53:52 pm »
Just installed this in my SL-C1000. Very good job!
Select language:
News:
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Zaurus - pdaXrom / Looking For Transmission Ipk
« on: August 20, 2011, 07:35:26 am »
Hello
Does anybody have the bittorrent client transmission lying around. It was compiled by kkazakov13 but the feeds dissapeared long time ago.
Thank you
Does anybody have the bittorrent client transmission lying around. It was compiled by kkazakov13 but the feeds dissapeared long time ago.
Thank you
3
Off Topic forum / I Don't Get It, No Body Posts But Ussually About 20 Users Online?
« on: August 16, 2011, 08:24:10 pm »
I also come here and check the latest messages once a week.
saddly, my Zaurus has been in a drawer for many months. Lately, I've been thinking into turning it into a torrent downloading machine, will post about it when I start.
saddly, my Zaurus has been in a drawer for many months. Lately, I've been thinking into turning it into a torrent downloading machine, will post about it when I start.
4
Ubuntu / How Do You Input Function Keys?
« on: April 20, 2009, 01:50:19 pm »
nope, no funtion key work at all. Do they work for you?
5
Ubuntu / How Do You Input Function Keys?
« on: April 19, 2009, 03:33:17 pm »
Yes, I have those lines in xmodmap. I'm using that Jaunty zubuntu install.
I've even tried to put "F10" at those positions on all the number keys, unsuccessfully.
Finally. I had to map it to the right shift key. But of course I can only access F10. Unfortunately, openMSX on the zaurus is too slow to be usable at the moment.
I guess Xbindkeys has something to do with this problem. But even if I kill it, function keys still don't work.
I've even tried to put "F10" at those positions on all the number keys, unsuccessfully.
Finally. I had to map it to the right shift key. But of course I can only access F10. Unfortunately, openMSX on the zaurus is too slow to be usable at the moment.
I guess Xbindkeys has something to do with this problem. But even if I kill it, function keys still don't work.
6
Ubuntu / How Do You Input Function Keys?
« on: April 14, 2009, 04:18:42 pm »
Yes, changing standard letters work perfectly.
I supposed that pressing "Fn" + 1-0 would send F1-F10, but it doesn't. Is that the correct key combination?
Thanks
I supposed that pressing "Fn" + 1-0 would send F1-F10, but it doesn't. Is that the correct key combination?
Thanks
7
Ubuntu / How Do You Input Function Keys?
« on: April 14, 2009, 05:25:51 am »
I need to press F10 for entering a program option (openMSX), but I'm lost. I've tried modifying keymaps and modmaps with no luck
I haven't found the way either witht the zaurus keyboard or an external USB keyboard.
Any clue?
I haven't found the way either witht the zaurus keyboard or an external USB keyboard.
Any clue?
8
Spain / Aun Queda Vida
« on: January 05, 2009, 04:52:04 pm »Quote from: ipenido
¿Cuantos usuarios españoles (aunque prefiero abrir el cero a todos los hispanohablantes) activos quedan que la conserven y cuantos que la usen habitualmente?
Yo tengo una C1000 en casa para ebooks y trastear. Y Una C3100 que llevo a casi todos lados, conectandola al movil con BT la uso para el correo electronico, web, etc.
9
C1000/3x00 General discussions / C1000 No Rom Upload
« on: April 13, 2008, 02:45:42 pm »
Go to this site :
http://trisoft.de/en_c1000howto.htm
and follow the instructions in the section : In case a backup won't work (and only then !)
That should restore the zaurus to an usable state.
http://trisoft.de/en_c1000howto.htm
and follow the instructions in the section : In case a backup won't work (and only then !)
That should restore the zaurus to an usable state.
10
Accessories / Sitecom CN-501 Bluetooth card, working?
« on: March 31, 2008, 01:57:55 pm »
Hi,
It works fine in PDAXii13 after modifying this line in /etc/bluetooth/bt-uart.conf
"Compact Flash", "Bluetooth Card", "", "":/dev/ttyS3 -s 921600 bcsp:/dev/ttyS3 baud_base 921600
and deleting the second line with "Compact Flash", "Bluetooth Card",......
It works fine in PDAXii13 after modifying this line in /etc/bluetooth/bt-uart.conf
"Compact Flash", "Bluetooth Card", "", "":/dev/ttyS3 -s 921600 bcsp:/dev/ttyS3 baud_base 921600
and deleting the second line with "Compact Flash", "Bluetooth Card",......
11
Android / Google Android M5-rc14 Installable Image Available!
« on: March 04, 2008, 11:35:57 am »Quote from: zogs
ok it's normal but don't start , I'm waiting for a long time...I'm can see just the red line
Same thing here.
I'm getting this errors on the console:
PANIC: handle_group_exit: xxxx leader xxxx
repeated, where xxxx are different everytime.
attached is the log-init file with the lowest number. there are many after a while.
12
Zaurus - pdaXrom / Bluetooth In R198
« on: June 24, 2007, 12:07:26 pm »Quote
actually, with SP8 installed, all that is set for you automatically...
/etc/rc.d/init.d/bluetooth start or stop will do the trick
[div align=\"right\"][a href=\"index.php?act=findpost&pid=163640\"][{POST_SNAPBACK}][/a][/div]
That isn't working for me. I still had to enter those commands for it to work.
There are two entries for "Compact Flash", "Bluetooth Card", "", "" in bt-uart.conf , could that be the reason?
13
Zaurus - pdaXrom / Bluetooth In R198
« on: June 24, 2007, 09:00:33 am »
It is working for me here with a Sitecom Compact Flash Bluetooth adaptor.
Installed r198
Installed SP8
inserted card
setserial /dev/ttyS3 baud_base 921600
hciattach -s 921600 /dev/ttyS3 bcsp
Then you can use hcitool scan, etc.
Thanks for your help!
Installed r198
Installed SP8
inserted card
setserial /dev/ttyS3 baud_base 921600
hciattach -s 921600 /dev/ttyS3 bcsp
Then you can use hcitool scan, etc.
Thanks for your help!
14
SIMpad forum / Simpad Sl4 Replacement Screen
« on: June 07, 2007, 01:32:24 pm »
I did exactly that, put a WP50 screen in a SL4. It works fine, at least for 1 year or so , when it developed the same problem i had with the original touch screen, completely innacurate, with strange cursor jumps.
15
Zaurus - pdaXrom / D-link Dcf-660w With R198
« on: June 05, 2007, 09:59:36 am »
I'm having a hard time trying to figure out what's wrong with my card, hope you can help me.
I have a SL-C1000 with r198 installed and Meanie's SP4 applied.
I define all the network settings before plugging in the card as wlan0.
when I plug it in, it connects fine for some 30 seconds and then disconnects. from that point, nothing makes sense to me.
sometimes it shows up with lspcmcia/pccardctl, sometimes it doesn't.
many times, the screen turns white until I unplug the card.
lsmod shows that orinoco, orinoco_cs, hermes, hostap_cs, hostap all are loaded.
in /sys/bus/pcmcia/drivers, there are hostap, ide_cs and orinoco subfolders.
there are only three files in /etc/pcmcia/ shouldn't there be a lot of .opts files there?
Here's a part of my dmesg after pluggind the card
Again, sometimes it works fine for 15-20 minutes and suddenly the light turns off.
I've tried to trace the problem, but, in my ignorance, nothing makes sense to me.
Help!
TIA
I have a SL-C1000 with r198 installed and Meanie's SP4 applied.
I define all the network settings before plugging in the card as wlan0.
when I plug it in, it connects fine for some 30 seconds and then disconnects. from that point, nothing makes sense to me.
sometimes it shows up with lspcmcia/pccardctl, sometimes it doesn't.
many times, the screen turns white until I unplug the card.
lsmod shows that orinoco, orinoco_cs, hermes, hostap_cs, hostap all are loaded.
in /sys/bus/pcmcia/drivers, there are hostap, ide_cs and orinoco subfolders.
there are only three files in /etc/pcmcia/ shouldn't there be a lot of .opts files there?
Here's a part of my dmesg after pluggind the card
Code: [Select]
pccard: PCMCIA card inserted into slot 0
pcmcia: registering new device pcmcia0.0
ieee80211_crypt: registered algorithm 'NULL'
hostap_cs: 0.4.4-kernel (Jouni Malinen )
hostap_cs: setting Vcc=33 (constant)
hostap_cs: setting Vcc=33 (from config)
Checking CFTABLE_ENTRY 0x01 (default 0x01)
IO window settings: cfg->io.nwin=1 dflt.io.nwin=1
io->flags = 0x0046, io.base=0x0000, len=64
hostap_cs: Registered netdevice wifi0
hostap_cs: index 0x01: Vcc 3.3, irq 137, io 0xc4820000-0xc482003f
prism2: wifi0: operating mode changed 3 -> 2
prism2_hw_init: initialized in 320 ms
wifi0: hfa384x_cmd: entry still in list? (entry=c1cdb3a0, type=0, res=0)
wifi0: hfa384x_cmd: command was not completed (res=0, entry=c1cdb3a0, type=0, cmd=0x0121, param0=0xfc00, EVSTAT=8000 INTEN=0010)
wifi0: hfa384x_set_rid: CMDCODE_ACCESS_WRITE failed (res=-110, rid=fc00, len=2)
ieee80211_crypt: registered algorithm 'WEP'
wifi0: NIC: id=0x800c v1.0.0
wifi0: PRI: id=0x15 v1.1.1
wifi0: STA: id=0x1f v1.7.4
wifi0: registered netdevice wlan0
wifi0: LinkStatus=1 (Connected)
wifi0: LinkStatus: BSSID=00:80:5a:31:7b:9b
orinoco 0.15rc3 (David Gibson , Pavel Roskin , et al)
orinoco_cs 0.15rc3 (David Gibson , Pavel Roskin , et al)
ADDRCONF(NETDEV_CHANGE): wifi0: link becomes ready
wifi0: invalid skb->cb magic (0x00000000, expected 0xf08a36a2)
wifi0: invalid skb->cb magic (0x00000000, expected 0xf08a36a2)
wifi0: invalid skb->cb magic (0x00000000, expected 0xf08a36a2)
wifi0: hfa384x_cmd_issue: cmd reg was busy for 5 usec
wifi0: hfa384x_cmd: entry still in list? (entry=c1cdbae0, type=0, res=0)
wifi0: hfa384x_cmd: command was not completed (res=0, entry=c1cdbae0, type=0, cmd=0x0021, param0=0xfd51, EVSTAT=8888 INTEN=8888)
wifi0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fd51, len=6)
pccard: card ejected from slot 0
wifi0: hfa384x_cmd: entry still in list? (entry=c1cdbae0, type=0, res=0)
wifi0: hfa384x_cmd: command was not completed (res=0, entry=c1cdbae0, type=0, cmd=0x0021, param0=0xfd51, EVSTAT=8888 INTEN=8888)
wifi0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fd51, len=6)
wifi0: hfa384x_cmd: entry still in list? (entry=c3e5b520, type=0, res=0)
wifi0: hfa384x_cmd: command was not completed (res=0, entry=c3e5b520, type=0, cmd=0x0002, param0=0x0000, EVSTAT=8888 INTEN=8888)
hostap_cs: Shutdown failed
wifi0: removed pending cmd_queue entry (type=1, cmd=0x0011, param0=0xf100)
wifi0: removed pending cmd_queue entry (type=0, cmd=0x0021, param0=0xfd51)
wifi0: card already removed or not configured during shutdown
wifi0: hfa384x_cmd: command was not completed (res=0, entry=c1cdbae0, type=0, cmd=0x0021, param0=0xfd51, EVSTAT=0000 INTEN=0000)
wifi0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fd51, len=6) Again, sometimes it works fine for 15-20 minutes and suddenly the light turns off.
I've tried to trace the problem, but, in my ignorance, nothing makes sense to me.
Help!
TIA