Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - _Psycho

Pages: 1 ... 5 6 [7] 8
91
Software / Will this let us play King\'s Quest on the Zaurus ?
« on: June 21, 2004, 04:46:31 pm »
Quote
Scummvm zport is trying to set the video mode to 640x480. That\'s why is not working on your 5600, and that\'s why the version is 0.6.0-zports_c7x0-4.

Anyway, the libSDL is still not detecting your 5600. I don\'t know why. I\'m starting to think that perhaps sarien is using a statically linked libSDL. Psycho, could you throw some light on this? I\'ll also take a look at the detection code, but with that /proc/deviceinfo/product it should be detected as a 5600 correctly.

Regards.


Good possiblity, i dont remember at all if sarien was statically linked with my own libSDL (I dont think due to the size of it). But I have a look as soon as i can (this week i hope, im so busy).

92
Cxx0 General discussions / Clamshell warranty repairs
« on: June 20, 2004, 05:09:42 pm »
I have been tried to find a busted c7x0 device with a working screen without luck. I Guess the screen it always what peoples broke anyway. Too har dot find :/

93
Cxx0 General discussions / c860 wont connect to apple airport
« on: June 17, 2004, 02:33:01 pm »
Check in your Airport if you can setup the Preamble, Maybe its Short Preamble, The usual standard only support long Prenamble (probably a RF setting). Thats the only suggestion i have atm

94
Software / Problem with SCUMMVM
« on: June 17, 2004, 09:46:15 am »
I just changed my avatar, i just like the Pingu Z too much

95
Still looking !

I also contacted conics and dynamism for damaged devices. Conics had a couple of C7x0 that doesnt charge and stuff like that, but i dont want to put a 250-350$ US only for the screen. I rather wait a new Z version.

If anyone have any suggestion on zaurus seller that might have bricked device thats would be great.

Thanks,

Carl

96
Qt/Qtopia / Compiling libSDL from zports CVS
« on: June 14, 2004, 02:47:10 pm »
Quote
Thanks for all your efforts, Kenny and _Psycho (and blakeyez) at making this an eventual reality for the Z! Maybe all three of you can work together on this one... _Psycho you\'re the one that\'s maintaining ZPorts right? That might be a good place to host this?

Anyway, whatever you guys decide, your efforts are very much appreciated.
Yz


Yeah i maintain it with Manuel Teira Paz, he is the one compiling more stuff atm (and he redid the page better than my first version  I should fix the menu color thought i never really liked them. I have not done anything for a very long time (I was busy with some other emulation project (WoW).  Last night I updated my debian etc etc took me like 2-3 hours, especially X-windows, DRI stuff was not working anymore with my kernel 2.6.6. I also saw that im gonna have to recompile qt and qtopia once I have done that tonight. I should have a good system again to port stuff
I hope i can get some games working tonight.

Zports is there to host any zaurus port ! I want to add stratagus on it, Duke 3D (if thats ever work, i only have the \"atomic edition\") and openttd
when i can.  Everyone is welcome to put / port more program on zports !

97
Software / Problem with SCUMMVM
« on: June 14, 2004, 01:42:21 pm »
Quote
I\'m having trouble with this version (scummvm_0.6.0-zports_c7x0-1_arm). The Menu key no longer brings up the menu like the 0.5.5 version did - which means I cant load/save games! Anyone else seeing this..?

Yz


I didn\'t tried the 0.6.0 yet, but indeed menu key should bring up the menu, except if the key changed (no idea).

As for the calibration hmm I need to check too, 0.5.5cvs didn\'t had that prob for sure.

98
Qt/Qtopia / Compiling libSDL from zports CVS
« on: June 14, 2004, 10:51:57 am »
I lacked of time yesterday, I hope i will have time to compile it tonight to test.

99
Software / Problem with SCUMMVM
« on: June 14, 2004, 10:31:39 am »
I finished Day of the Tentacle and Indiana Jones 4 on it, both are great are work fine

100
Software / Problem with SCUMMVM
« on: June 13, 2004, 08:30:48 pm »
get the revision 1 on zports.sf.net, thats fixed. Should work fine on your c750
scummvm_0.6.0-zports_c7x0-1_arm.ipk

101
Qt/Qtopia / Compiling libSDL from zports CVS
« on: June 13, 2004, 11:35:12 am »
Hmm sound great, I have to check that

102
Software / Will this let us play King\'s Quest on the Zaurus ?
« on: June 13, 2004, 11:16:22 am »
Btw sarien only support OLD agi game, not the most recent one. (SCI) Thats mean vga game wont work on it.

As for the sound. I did the zports compile. There was 2-3 things left undone, but i never had any time to recheck it. No idea about that. and for the reverse screen. I think we h ave to detect the 5600 model in the libSDL and thats might fix it.

103
Linux Applications / SDL compile trouble
« on: June 11, 2004, 07:50:37 am »
You can also put SDL_main() in your code instead of main(), I believe that usually work
(Or maybe you have to).

104
Software / New 5600 and doom?
« on: June 10, 2004, 12:44:12 pm »
Try prdoom from zports.sf.net ?

I remember i installed it a while back worked fine (dont remember about the keys thought). And Quake was way too slow. I know mteira compiled doom recently on zports for the c7x0. I don\'t know how good it is on a 5600 thought.

105
Qt/Qtopia / Games and Game Ports On the Cx60 series machines
« on: June 10, 2004, 08:04:26 am »
Quote
What about Duke 3D? Apparently the original source has been released so it runs natively on linux...http://icculus.org/duke3d/


I have a couple of compile planned this weekend, I will probably give Duke3d a try

Also I looked at Lincity, it use X or SVGAlib etc, thats would take a lots of coding to port to the SDL or something copatible with the zaurus. Probably too much work. (Well i think, i have not looked at the source code).

For scummvm, just take our package at zports.sf.net, the 0.6.0cvs is there.
I did a lots of lucasarts games, that emu is great for the zaurus.

And there is also the warcraft II clone (another thread). Im waiting on the guy answer to see if he want to add it on zports web page

Pages: 1 ... 5 6 [7] 8