Messages

241

Software / Who has been able to get Stratagus (WarCraft2) to work?

« on: May 15, 2004, 11:40:39 am »

TonyOlsen, That\'s what I\'m actually trying to do ... installed zgcc on my zaurus, compiled latest sdl libs but it wont work as the zgcc toolkit for zaurus stands in a cramfs image so sdl installer can\'t write sdl dev libs in it then lua wouldn\'t compile because it won\'t find SDL  any1 knows were I can find a zgcc image with sdl dev libs inside ? (or how to tweak the cramfs I already have ? ) ...

242

Cxx0 General discussions / C860 Questions

« on: May 15, 2004, 10:09:03 am »

so it\'s not the good format ... maybe a package for a familiar distribution or so ? try downloading it from a different source

243

Cxx0 General discussions / C860 Questions

« on: May 15, 2004, 09:55:05 am »

you should try installing your package with the konsole ... open the konsole, type su to get root priviledge then cd /wherever/your/ipks/are and ipkg install xxx.ipk ... you\'ll have a more verbose description of what went wrong

244

Software / Who has been able to get Stratagus (WarCraft2) to work?

« on: May 15, 2004, 09:51:22 am »

I understand that ... but how can the same sdl lib which worked for someone else with a different qt-based rom / Zaurus not be working with my qt-based rom /Zaurus ? may it be a kernel related problem ?

245

Software / Who has been able to get Stratagus (WarCraft2) to work?

« on: May 15, 2004, 08:58:51 am »

lucho : then how do you explain it\'s working fine with pdaXrom and not with cacko\'s 1.21a QT rom, even using the same sdl lib wich worked for everyone here ? I don\'t think the problem is comming from the sdl library installed ... except maybe if it\'s the one installed when compiling ?

246

Qt/Qtopia / WarCraft on the Zaurus (640x480)? "FreeCraft" or &

« on: May 14, 2004, 07:42:01 pm »

well ... I\'m now downloading zgcc to recompile stratagus right on my C860 with the 1.21a rom ... hope it\'ll work

247

Qt/Qtopia / WarCraft on the Zaurus (640x480)? "FreeCraft" or &

« on: May 14, 2004, 06:02:01 pm »

I did finally set up a dual boot (just bought an SD card) thanks to this post and got it working with pdaXrom  ... but it\'s really slow as it\'s running on a cheap sd card  :cry: seems to be a rom / compilation problem so if someone can have it compiled for cacko\'s 1.21a rom ?

248

Qt/Qtopia / WarCraft on the Zaurus (640x480)? "FreeCraft" or &

« on: May 14, 2004, 10:03:53 am »

here\'s the binary compiled for pdaXrom

I still didn\'t had time to test it (trying to launch it in pure console mode with my Qt rom at the moment)

249

Qt/Qtopia / WarCraft on the Zaurus (640x480)? "FreeCraft" or &

« on: May 14, 2004, 05:20:02 am »

ronba : yes I\'d like it

250

Qt/Qtopia / WarCraft on the Zaurus (640x480)? "FreeCraft" or &

« on: May 14, 2004, 04:03:26 am »

My freecraft have exactly the same problem as yours, and i\'m running a SL-C750 with a 60M swapfile on a CF on Cacko\'s ROM 1.21a
.... when i click on a unit it freeze, sometime I can click on two units but after it freeze up.....

Seem the problem may come from a rom/library version mismatch and not a unit incompatibility  .... I gonna give a last chance to Cacko\'s rom 1.21a then try switching to a different rom

251

Qt/Qtopia / WarCraft on the Zaurus (640x480)? "FreeCraft" or &

« on: May 13, 2004, 06:53:52 pm »

there\'s no seem to be any link between sound/pattern loading for me as the zaurii is hanging even if I tap somewhere on the grass over the map (e.g not on a unit ... I think it must a rom/library related problem ... another thing it could be is ... I have a memory problem on my Z which was causing me some trouble to change the rom back in time (fixed with new installers versions) and which is also causing me some visual bugs (blinking pixels over the screen with some roms during the boot up screen etc...) .... I\'ve heard that there were a few \"buggy\" SL-C860 like mine so it may also be the problem

252

Software / Who has been able to get Stratagus (WarCraft2) to work?

« on: May 13, 2004, 06:46:29 pm »

I kinda agree with the aim of this thread, also trying to have it running ... for now I tryed it with cacko\'s 1.21a Qtopia rom with libSDL_1.2.6-zports_c7x0_arm.ipk ... with 32Mb swapfile and without swapfile without any difference

253

Qt/Qtopia / WarCraft on the Zaurus (640x480)? "FreeCraft" or &

« on: May 13, 2004, 06:32:14 pm »

Just tryed reloading stratagus using ssh ti have a more verbose output ... here\'s what it gave :

$ stratagus
Display size = 480x640
Stratagus default config file loading ...

... ready!

Stratagus V2.0, © 1998-2004 by The Stratagus Project.
  written by Lutz Sammer, Fabrice Rossi, Vladi Shabanski, Patrice Fortier,
  Jon Gabrielson, Andreas Arens, Nehal Mistry, Jimmy Salmon and others.
        (http://Stratagus.Org)
  libmodplug Copyright by Kenton Varda & Olivier Lapique.
  VP3 codec Copyright by On2 Technologies Inc.
  SDL Copyright by Sam Lantinga.
Compile options ZLIB SDL SDL-AUDIO SOUND NEW-UNIT-CACHE MAP-REGIONS

Stratagus may be copied only under the terms of the GNU General Public License
which may be found in the Stratagus source kit.

DISCLAIMER:
This software is provided as-is.  The author(s) can not be held liable for any
damage that might arise from the use of this software.
Use it at your own risk.

QT_GetMachine: /proc/deviceinfo/product is \'SL-C860
 a{@0e{@@e{@\'
 detected machine is \'Sharp SL-C860\'
QT_GetRotation: Read spec from \'/tmp/qtembedded-zaurus/QtEmbedded-0.spec\'
 spec is \'Transformed:Rot270:Vga:0\'
 Rot=3, Qvga=0
QT_SetVideoMode: SL-C700 Style is Input style
QT_SetVideoMode: argSize=640x480
QT_SetVideoMode: qteSize=640x480
QT_SetVideoMode: fbSize=480x640
QT_SetVideoMode: qteRotation=3
QT_SetVideoMode: userRotation=-1
QT_SetVideoMode: sdlRotation=3
QT_SetVideoMode: qteKeyRotation=3
QT_SetVideoMode: sdlKeyRotation=3
Trigger not set, defining trigger

any ideas ? ... what about the undefined trigger ? (nothing appears when taping screen/device hanging up) - missing trigger message come when it finish loading the level

254

Qt/Qtopia / WarCraft on the Zaurus (640x480)? "FreeCraft" or &

« on: May 13, 2004, 06:05:34 pm »

I just tryed obtaining the log to have a clue with my problem but there no seem to be any error there :

Display size = 480x640
QT_GetMachine: /proc/deviceinfo/product is \'SL-C860
 a{@0e{@@e{@\'
 detected machine is \'Sharp SL-C860\'
QT_GetRotation: Read spec from \'/tmp/qtembedded-zaurus/QtEmbedded-0.spec\'
 spec is \'Transformed:Rot270:Vga:0\'
 Rot=3, Qvga=0
QT_SetVideoMode: SL-C700 Style is Input style
QT_SetVideoMode: argSize=640x480
QT_SetVideoMode: qteSize=640x480
QT_SetVideoMode: fbSize=480x640
QT_SetVideoMode: qteRotation=3
QT_SetVideoMode: userRotation=-1
QT_SetVideoMode: sdlRotation=3
QT_SetVideoMode: qteKeyRotation=3
QT_SetVideoMode: sdlKeyRotation=3

In the game I can move around the map using keys but it hang when i use the stylus to select  an unit or move it on the map ... maybe an input problem ?

255

Qt/Qtopia / WarCraft on the Zaurus (640x480)? "FreeCraft" or &

« on: May 13, 2004, 05:27:19 pm »

sounds weird to me that it can\'t find it in console mode and no problem with qtopia running ... try find / -name libqte.so.* and linking an existing libqte.so library to libqte.so.2 ... it did solve some problem for me with other softwares

edit : I just tried to launch stratagus in pure console mode ... no lib problems but : \"
Qsocket::writeBlock: Socket is not open
Qsocket::writeBlock: Socket is not open
Qsocket::writeBlock: Socket is not open
Qsocket::writeBlock: Socket is not open
No Qt/Embedded server appears to be running.
If you want to run this program as a server,
add the \"-qws\" command-line option
# stratagus -qws
Can\'t open framebuffer device /dev/fb0
Can\'t open framebuffer device /dev/fb0
 driver cannot connect
Aborted
# \"
seem we should give up the idea bypassing Qtopia to gain memory