Messages

61

Debian / Share The Sources, Guys :)

« on: February 15, 2008, 11:20:52 am »

another point :

i want to compile ra2500 kernel drivers for 2.6.24-yonggun but i need the kernel sources...

see:
https://www.oesf.org/forum/index.php?showto...st&p=174470

2orO would you help ? or compile it for us ? i'd like to try my asus wl167g wifi dongle

I attached the patch file in my blog. Check it please.

62

Debian / [new] Kernel 2.6.24.4 With Cpufreq

« on: January 30, 2008, 10:03:19 am »

2oro, can  you tell us which option caused the suspend bug?

I did following:

# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set

63

Debian / [new] Kernel 2.6.24.4 With Cpufreq

« on: January 30, 2008, 09:08:52 am »

Great! Will you upload new build to you site?

I already updated.  

64

Debian / [new] Kernel 2.6.24.4 With Cpufreq

« on: January 30, 2008, 06:29:13 am »

But I have a problem: When I suspend the system, I cannot turn it on and I should reset the system. Does anyone have this problem? This is the critical problem.

yonggun

Yes me to - resume is broken.

Ok, this kernel has something wrong. I cannot touch this problem for a while because I will have a vacation. Sorry for that.

yonggun

I just fixed it. When I changed one option in the kernel, the power resume works well.

65

Debian / [new] Kernel 2.6.24.4 With Cpufreq

« on: January 30, 2008, 05:55:11 am »

But I have a problem: When I suspend the system, I cannot turn it on and I should reset the system. Does anyone have this problem? This is the critical problem.

yonggun

Yes me to - resume is broken.

Ok, this kernel has something wrong. I cannot touch this problem for a while because I will have a vacation. Sorry for that.

yonggun

66

Debian / [new] Kernel 2.6.24.4 With Cpufreq

« on: January 29, 2008, 04:45:52 pm »

I updated the kernel 2.6.24. Please see the 1st post.

I am testing new kernel now, sharp bootloader version.
My marvell wi-fi card works for the first time, thanks to 2or0 and nokamoto!
The only problem I experieced for now is that tskeys eats 100% CPU after starting X. I used angstrom kernel before, so maybe some cfg files need to be tweaked for this version of kernel.

I don't have your problem. When I started xwindow, nothing happened as usual.

But I have a problem: When I suspend the system, I cannot turn it on and I should reset the system. Does anyone have this problem? This is the critical problem.

yonggun

67

Debian / How To Change Cpu Freq In Debian Eabi?

« on: January 29, 2008, 10:18:53 am »

There is only cpuoverclock.py to change the cpu freq. It is not enough and caused screen flicker.

1. As yonggun's cpufreq kernel, it support cpufreq interface and use cpufreqd to change cpu freq according to cpu usuage.

2. PXA support speedstep. It means the cpu freq can be changed only step by step. It may cause hardware problem if we change cpu freq too much. The problem has been found when I developed mb-applet-powerctrl.

3. Lower cpu freq has no problem when suspend or resume in pdaxrom. But in eabi, it cause white screen.

You can use the command 'dvfm' to change the cpufreq.

68

Debian / [new] Kernel 2.6.24.4 With Cpufreq

« on: January 29, 2008, 10:16:06 am »

I updated the kernel 2.6.24. Please see the 1st post.

69

Debian / E17

« on: January 14, 2008, 04:03:02 pm »

well, nobody is gonna give  fuck... ?

:/
I talked to Raster this night, there's nothing special about arm, it should work...

I tried your e17 but I got exactly same error with you.  

70

Debian / New Kernel 2.6.23.9 For C3100 And C3200

« on: January 14, 2008, 07:00:55 am »

Thank you for your work!

• patched with angstrom and cpufreq
• Patch the frequency scaling bug - touchscreen freezing

Where I can get this patches?

Check here:
http://www.bigbridgezau.sakura.ne.jp/dev/patch/OpenZaurus/

71

Debian / [new] Kernel 2.6.24.4 With Cpufreq

« on: January 13, 2008, 09:41:24 am »

Hi 2or0,

Thanks a lot for the new version. I've just tried it on my C1000. It is successfully loaded  However, I've found two troubles:
1. I cannot start booting from SD card if CF card is not inserted. I think it would be great to compile something like
kernel.img-2.6.22.9-yonggun-eabi-mmcblk0p1 and/or kernel.img-2.6.22.9-yonggun-eabi-mmcblk0p2
In this case we do not have to insert CF card and hold '1' key each time we reboot C1000.
2. Cannot modprobe serial_cs. This is from dmesg:
serial_cs: Unknown symbol serial8250_unregister_port
serial_cs: Unknown symbol serial8250_resume_port
serial_cs: Unknown symbol serial8250_register_port
serial_cs: Unknown symbol serial8250_suspend_port
This module is required for bluetooth cards.

1. From kernel 2.6.23.x, kernel has something wrong. With Uboot I cannot boot properly regardless of booting option. This kernel has to boot into /dev/hda1, but it makes error if I don't press "1" when it boot. I cannot fix it.  

2. I added serial_cs modules.  

72

Debian / [new] Kernel 2.6.24.4 With Cpufreq

« on: January 13, 2008, 06:10:47 am »

Updated: Jul. 16 2008
- RNDIS patch
- PRISM2_DOWNLOAD_SUPPORT and PRISM2_NON_VOLATILE_DOWNLOAD enabled
http://yonggun.tistory.com/72
-----------------------

The kernel 2.6.24.4was built with cpufreq patch. I added the autofs4 module to auto-mount SD and CF card.
http://yonggun.tistory.com/72

Last modified: Apr. 17 2008
-------------------------------------------

The kernel 2.6.24.3 was built with cpufreq patch.
http://yonggun.tistory.com/68

Last modified: Mar. 25 2008
-------------------------------------------

FIXED

--------------------------
I built the kernel 2.6.24 for eabi debian on Z. These are patched with angstrom patches and without cpufreq. I tested only on C3200. Please give a feedback ASAP.

This kernel works on Cxx00 series.

 - There are the kernels for sharp loader and for uboot.

 - FUSE, serial_cs and ieee80211_crypt_tkip modules work.

http://yonggun.tistory.com/66

---------------------------
Hi, I built kernel 2.6.24-rc7 for debain eabi. It works for my c3200. Maybe it works on c1000(). Would someone test it on C1000?

Also I uploaded the patch file. Someone interested in rebuilding the kernel, can use it.

http://yonggun.tistory.com/64

73

Debian / Debian Eabi Console Mode Powered :)

« on: January 13, 2008, 05:59:01 am »

about screenrc.tar.gz :

i'm really unhappy with it, because i "tar zxvf" it in my   " ~ " directory, and it erase my  ".bashrc" to put a new one... i lost all my bash config, and that sucks a lot.

Be careful guys.

Sorry to hear that.  

74

Debian / A Clean, Fresh, Configured Eabi Rootfs Tarball

« on: January 09, 2008, 06:14:34 am »

hey everybody

does anyone know if there's a kernel with ieee80211 tkip support for C1000 ?
youggun's 2.6.22 does not :-(

Here is the ieee80211 tkip module for 2.6.22.9. Just remove 'tar.gz' in the file name.

 [ Invalid Attachment ]

75

Android / Google Android On Debian Eabi

« on: January 09, 2008, 05:50:01 am »

i also see the red ball bounce and nothing more, any fix zdevil? saw you could solve it

thnx

In my case, I unloaded the ohci_hcd module when I run android. Please check this is loaded.