Messages

1

For Sale / Wanted / Wtb: Ce-rh2 Remote

« on: December 02, 2006, 03:15:00 pm »

I'd like to buy a CE-RH2 remote for use with my 3100.  However, for such a relatively simple piece of plastic and electronics, these are so very expensive.  Here's what I've found:

Conic.net: $67.57
Streamline CPUs: $89.99
Trisoft.de: $97.67
Figlabs: $104.64

Good god!

Does anyone know a better place?  Or is willing to sell me one?

2

Security and Networking / Symbol La-4137, Doesn't Work On Cacko 1.23

« on: December 02, 2006, 03:03:24 pm »

Nope!

I have a cf storage card that works fine, and this wifi card works fine in OZ.  It's definitely a software issue.

Nice try.

3

Security and Networking / Symbol La-4137, Doesn't Work On Cacko 1.23

« on: December 02, 2006, 12:51:31 pm »

Sorry for the late reply, I had given up on this thread.

speculatrix:
I see:
Socket 0:
   product info: "Symbol", "Spectrum24 LA4100 Series WLAN PC Card", "1.00"
   manfid: 0x026c, 0x0001
   function: 6 (network)

Socket 0:
   3.3V 16-bit PC Card
   Function 0: [ready]

ioctl(): Device or resource busy
ioctl(): Device or resource busy

I'm not sure what you are trying to say about the firmware...do I have to install something extra?

After inserting the card, dmesg displays:
cs: socket c3fd3800 timed out during reset,  Try increasing setup_delay

How do I increase setup_delay?

sidmoraes: Those lines are already like that...

Thanks for the replies!

4

Security and Networking / Symbol La-4137, Doesn't Work On Cacko 1.23

« on: November 20, 2006, 08:10:37 am »

Still seeing this issue.  Does anyone have any idea how to fix it?  Any help appreciated!

5

Security and Networking / Symbol La-4137, Doesn't Work On Cacko 1.23

« on: November 11, 2006, 08:24:46 pm »

Hi.  I'm reposting this thread here, in the hope that someone else will see it and help.  Any suggestion appreciated!

I'm running Cacko 1.23 on a 3100, and I cannot get my Symbol LA-4137 card working. If I plug it in, the text appears and tells me it was inserted, but then, nothing. The lights don't blink, iwconfig doesn't list it, and the networking app's connect button is grayed out. What should I do?

6

Sharp ROMs / Symbol La-4137

« on: November 07, 2006, 11:20:41 pm »

*bump*

7

Sharp ROMs / Symbol La-4137

« on: November 02, 2006, 09:39:47 pm »

Yep, everything on my Z is exactly like that (the first file is more like 4.5k, though).  The files are there, and /etc/pcmcia/spectrum.conf looks exactly like what you posted.

I also did a bit more testing.  I have another wireless card, a D-Link Air DCF-660W, and it acts the same exact way: recognized, but doesn't work, with a yellow triangle.

However, running 'cardctl ident' with the D-Link works as expected, but running 'cardctl ident' with the symbol card makes the screen fade to white with a single black line.  At this point, yanking the card returns my z to normal, with the output of the command showing "no product info available" for Socket 0, the socket on the side.

Both cards work perfectly correctly on OZ/anything.  The D-Link card did work with the plain vanilla Sharp ROM; I didn't own the Symbol one at the time.

I hope all this info helps, and eagerly await your next attempt to fix things.

Thanks!

8

Sharp ROMs / Symbol La-4137

« on: October 31, 2006, 03:57:24 pm »

Ok, thanks for all the replies.

HoloVector: It *is* recognized, as a LA4100 Spectrum24 CF WLAN Card, but the icon next to it in the popup menu is the yellow triangle Attention! icon.  I assume that's bad.  I can add a profile, but no plgu appears, and the connect button remains grayed out.

I think I do need to load the orinoco_cs module, but attempting to do so gives me an error:
/lib/modules/.rom/2.4.20/kernel/drivers/net/wireless/orinoco_cs.o: unresolved symbol hermes_struct_init

I insmodded the hermes module, and then tried orinoco_cs, and that worked, but doesn't seem to have much affect.  Nothing still works.

Hrw:  The only reason I'm using Cacko/Sharp is because my mixers work.

9

Sharp ROMs / Symbol La-4137

« on: October 31, 2006, 12:01:07 pm »

Hrw:  I don't see that in the feeds, which ipk should I be installing?

HoloVector:  I installed the Full version, and unfortunately, it is not plug and play.

Any help appreciated!

10

Angstrom & OpenZaurus / Map Spin Wheel To Volume Control On A 3100

« on: October 31, 2006, 11:51:17 am »

Aha!  Exactly what I wanted.  Thanks a lot!

I did in fact write a small ruby script to increase and decrease the volume of the mixer directly, and have, as suggested, added it to the wiki.

11

Sharp ROMs / Symbol La-4137

« on: October 30, 2006, 07:44:51 pm »

Hi,

I'm running 1.23 on a 3100, and I cannot get my Symbol LA-4137 card working.  If i plug it in, the text appears and tells me it was inserted, but then, nothing.  The lights don't blink, iwconfig doesn't list it, and the networking app's connect button is grayed out.  What should I do?

12

Angstrom & OpenZaurus / Map Spin Wheel To Volume Control On A 3100

« on: October 28, 2006, 07:47:02 pm »

I'm running OZ/Opie on my 3100 (spitz), and I'd like to use it as an mp3 player as I did when I used the Sharp ROM.  MP3 playback works,but the volume is adjustable, it seems, only through the commandline 'alsamixer'.  Coredump told me on IRC that the graphical mixers don't work with ALSA currently, and will be updated at somepoint, later.  Until then, is there anyway to map the little wheel to amixer commands that would increase and decrease my PCM mixer?  How would I do this?  Or, is there any other alternatives?  Thanks!

13

Angstrom & OpenZaurus / Wifi Troubles

« on: October 20, 2006, 12:53:11 pm »

Oh.  Ok, i'm running 3.5.4.1

I was under the assumption that i was doing something wrong.  It'll be difficult to install the kernel update with a connection, but I guess that's life.  Thanks for looking into this, hrw.

14

Angstrom & OpenZaurus / Wifi Troubles

« on: October 18, 2006, 07:18:39 pm »

Hmm, nothing?  Is this in the wrong forum?  Can an admin please move this thread to the Security and Networking forum?

15

Angstrom & OpenZaurus / Wifi Troubles

« on: October 16, 2006, 02:13:05 pm »

hi, I have a C3100, running OZ/Opie 3.5.4.2, with a card 'cardctl ident' identifies as a D-Link DCF-660W, 0xd601, 0x0005.  I've been unable to get it to get an IP from my wireless router, or, when I assign it a static IP, ping the router.  

It can scan and find my AP easily, but no actual data transfer happens.  I've confirmed that its not my wireless router, and I have run hrw's command to remove all the Orinoco drivers.  'dmesg' has nothing that stands out.  

What else can I do?  This card worked with the Sharp ROM, but I really want to use OZ/Opie.  Any pointers are appreciated!