Messages

16

Angstrom & OpenZaurus / 512mb Sd (non)automount Using Hentges Rom

« on: March 04, 2005, 07:02:12 pm »

Ok, I've attached the new script. Please gunzip and copy it into /etc (so the full path is /etc/sdcontrol).

I would appreciate it if everyone who has problems w/ SD in recent builds (ie: hentges ROMs etc)
would test this new script. A new OZ release is due soon and we really don't want to see this problem in the next official release.

Thanks!
[div align=\"right\"][a href=\"index.php?act=findpost&pid=69346\"][{POST_SNAPBACK}][/a][/div]

thanks much! i will try it immediately and post results..

edit: do i need to chmod it or anything?

editx2:  well.. in my /mnt folder i now have
card
card1
card2
card3
card4
lol.. but none of them actually has the card mounted...

17

Angstrom & OpenZaurus / 512mb Sd (non)automount Using Hentges Rom

« on: March 01, 2005, 11:07:09 pm »

thanks for your time..


At some point the auto-mounter script was updated to finally support
multiple partitions on a SD card.

I need a little bit more info to look into this.

What is the exact command you issue when you manually mount the card?

Code: [Select]

mount /dev/mmcda1 /media/card

What is the content of /proc/partitions after a reboot with SD card inserted but not mounted?

Code: [Select]

major     minor     #blocks     name

     3            0         125184     hda
     3            1         125168     hda1
What is the output of "dmesg" right aftera  reboot?

Code: [Select]

Linux version 2.4.18-rmk7-pxa3-embedix- (mhentges@mhcln01) (gcc version 2.95.3 20010315 (release)) #1 Tue, 14 Dec 2004 18:08:28 +0100
CPU: Intel StrongARM-1110 revision 9
Machine: Sharp-Collie
Security risk: creating user accessible mapping for 0x00000000 at 0xe8000000
Security risk: creating user accessible mapping for 0x08000000 at 0xea000000
Security risk: creating user accessible mapping for 0xc2000000 at 0xf2000000
Security risk: creating user accessible mapping for 0x40000000 at 0xf0000000
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=tty1 root=/dev/mtdblock4 rootfstype=jffs2 jffs2_orphaned_inodes=delete mem=64M
Relocating machine vectors to 0xffff0000
Console: colour dummy device 80x30
Calibrating delay loop... 137.21 BogoMIPS
Memory: 64MB = 64MB total
Memory: 62328KB available (1688K code, 363K data, 80K init)
Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
GA Chip: L1
UCB1200 generic module installed
RCSR = 1
suspend main adc = 592(592)
fatal chk = 381
full reset !
suspend main adc = 593(593)
fatal chk = 382
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.14)
apm: Current AC Status : 0
batok installed
Starting kswapd
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
comadj = 157,44414d43,44414d43
Console: switching to colour frame buffer device 60x53
Collie frame buffer driver initialized.
keyboard initilaized.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with no serial options enabled
COLLIE serial driver version 1.3
ttyS0 on SA1100 UART3 (irq 17)
ttyS1 on SA1100 UART1 (irq 15)ttyS2 on SA1100 UART2 (irq 16), using IRDA
touch adj= 18121,24988,-1310720,-2883584
ucb1200 touch screen driver initialized
sharpled_init: done.
SA1100 Real Time Clock driver v1.00
block: 128 slots per queue, batch=32
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
loop: loaded (max 8 devices)
PPP generic driver version 2.4.1
PPP BSD Compression module registered
ide-cs.c 1.26 1999/11/16 02:10:49 (David Hinds)
Collie Sound Driver Installed
TC35143F audio driver initialized
MTD Sharp chip driver
SA1100 flash: probing 32-bit flash bus
Using static partition definition
Creating 6 MTD partitions on "SA1100 flash":
0x00000000-0x00020000 : "Angel Monitor"
0x00020000-0x00040000 : "CF Updater"
0x00040000-0x000c0000 : "Diagnostics"
0x000c0000-0x001c0000 : "kernel"
0x001c0000-0x00fe0000 : "jffs2"
0x00fe0000-0x01000000 : "angel stuff"
Linux Kernel Card Services 3.1.22
  options:  [pm]
SA-1100 PCMCIA (CS release 3.1.22)
sa1100_pcmcia_init(0)
sa1100_pcmcia_init(1)
Frontlight Driver Initialized.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
IrCOMM protocol (Dag Brattli)
VFS: Mounted root (jffs2 filesystem) readonly.
Freeing init memory: 80K
klips_info:ipsec_init: KLIPS startup, Openswan KLIPS IPsec stack version: 2.2.0
klips_info:ipsec_alg_init: KLIPS alg v=0.8.1-0 (EALG_MAX=255, AALG_MAX=251)
klips_info:ipsec_alg_init: calling ipsec_alg_static_init()
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
usbdcore: usbdcore 0.1 035 2002-06-12 20:00 (dbg="")
net_fd 0.1 035 2002-06-12 20:00 (dbg="",alwaysup=0,OUT=64,IN=64)
vendorID: 4dd productID: 8004
sa1100_bi 0.2 035 2002-06-12 20:00 (dbg="")
bi_modinit: call udc_startup_events
bi_device_event: call udc_enable
bi_device_event: call udc_all_interrupts
SD Driver Initialized.
sharp_mmcsd 0.21 27 Sep 2002
IrDA: Registered device irda1
hostap_crypt: registered algorithm 'NULL'
hostap_cs: 0.3.7 - 2005-02-12 (Jouni Malinen )
hostap_cs: setting Vcc=33 (constant)
hostap_cs: CS_EVENT_CARD_INSERTION
hostap_cs: ignoring Vcc=33 (from config)
Checking CFTABLE_ENTRY 0x01 (default 0x01)
IO window settings: cfg->io.nwin=1 dflt.io.nwin=1
io->flags = 0x0046, io.base=0x0000, len=64
hostap_cs: Registered netdevice wifi0
hostap_cs: index 0x01: Vcc 3.3, irq 35, io 0xc4850000-0xc485003f
prism2_hw_init: initialized in 220 ms
wifi0: NIC: id=0x800c v1.0.0
wifi0: PRI: id=0x15 v1.0.5
wifi0: STA: id=0x1f v1.3.4
wifi0: defaulting to bogus WDS frame as a workaround for firmware bug in Host AP mode WDS
wifi0: registered netdevice wlan0
hostap_crypt: registered algorithm 'WEP'
wifi0: TXEXC - status=0x0004 ([Discon]) tx_control=000c
   retry_count=0 tx_rate=0 fc=0x4108 (Data::0 ToDS)
   A1=00:00:00:00:00:00 A2=00:06:25:ac:de:0f A3=ff:ff:ff:ff:ff:ff A4=00:00:00:00:00:00
wifi0: LinkStatus=6 (Association failed)
wifi0: LinkStatus: BSSID=44:44:44:44:44:44
wifi0: TXEXC - status=0x0004 ([Discon]) tx_control=000c
   retry_count=0 tx_rate=0 fc=0x4108 (Data::0 ToDS)
   A1=44:44:44:44:44:44 A2=00:06:25:ac:de:0f A3=33:33:ff:ac:de:0f A4=00:00:00:00:00:00
wifi0: LinkStatus=1 (Connected)
wifi0: LinkStatus: BSSID=00:80:c8:b7:f1:de
BlueZ Core ver 2.4 Copyright (C) 2000,2001 Qualcomm Inc
Written 2000,2001 by Maxim Krasnyansky
BlueZ L2CAP ver 2.3 Copyright (C) 2000,2001 Qualcomm Inc
Written 2000,2001 by Maxim Krasnyansky
BlueZ RFCOMM ver 1.1
Copyright (C) 2002 Maxim Krasnyansky
Copyright (C) 2002 Marcel Holtmann
wlan0: no IPv6 routers present

18

Angstrom & OpenZaurus / 512mb Sd (non)automount Using Hentges Rom

« on: February 28, 2005, 10:11:25 pm »

i have been using hentges rom with no problems for quite some time now, but i just upgraded my sd card from a 128 to a 512, and reflashed the ROM. my (new) sd card is not detected during the boot, so i halted the opie gui start and mounted from console.. then ran the cardfs install script and everything went well... almost. now everytime i boot the Z i have to go into konsole and manually mount the sd using mount /dev/mmcda1 /media/card ... once i do, all my apps show up and its like there was no prob whatsoever.. can anyone help me with this? even something as basic as how to add a script to the boot process, or after opie starts..  

edit: seems to also unmount when my z goes into standby

19

6000 - Tosa / Unable To Connect To Linksys Ap, Adhoc Works Fine

« on: February 17, 2005, 10:14:48 pm »

maybe the router uses MAC filtering for the WAN access but not for LAN access... u might try copying the MAC addy from a machine that you KNOW works on it, and then changing (spoofing) your MAC addy on the Z to see if you can get on then..

you can change your MAC addy on the Z from a console window like this:

Code: [Select]

ifconfig wlan0 down hw ether 0:0a:0a:a0:a0:a0
ifconfig wlan0 upreplacing the 0:0a:0a:a0:a0:a0 with the MAC addy you want to spoof


hope this helps

edit: oh damn i didnt read that part about mac filtering  
DOH!

20

Angstrom & OpenZaurus / Shepherd Login And Getting Out Of Terminal

« on: February 13, 2005, 10:00:03 pm »

@lardman

do you hear an echo in here?

=P

21

Angstrom & OpenZaurus / Shepherd Login And Getting Out Of Terminal

« on: February 13, 2005, 12:58:00 am »

i dont have the same Z as you, but if the directory structure is the same, then this should work for ya:

Code: [Select]

cd /
/etc/init.d/opie start
as far as the login thing goes, try "root" with no password or with password "rootme"
then, i would open your package manager and remove opie-login

hope this helps

22

Software / Aqpkg Icon

« on: February 09, 2005, 01:22:48 pm »

ive been looking for some sort of info on this, and i cant find it, so i figure ill ask.. can anyone tell me what the little star means when u are looking at the package list(s) with aqpkg?

23

Angstrom & OpenZaurus / 3.5.2 Upgrades

« on: February 08, 2005, 11:03:03 pm »

i would like to have dsniff also =D

24

For Sale / Wanted / Zaurus Accessories For Sale.

« on: February 05, 2005, 08:52:34 pm »

i am interested in the cradle and/or batteries... have you already dumped this stuff?
<<checks the posting date>>
well.. lemme know =)

25

Sharp ROMs / Compat-libs To Run Oz Packages On Sharp Rom?

« on: February 02, 2005, 07:30:43 pm »

is there such a thing?

26

General Discussion / Zaurus users in the Seattle, WA area?

« on: February 02, 2005, 07:19:49 pm »

<<< Seattle


::waves::

27

5x00 Hardware / Flasing Woes

« on: February 02, 2005, 03:06:11 pm »

i have a bogus kingston cf card too... i used to use it in a camera.. and it sat around for a year or so.. then i tried to use it in my 5500., and i get an "anonymous memory" identity... ive tried to build a partition table on it with OZ / Windoze / Nix and nothing works.. its just garbage i supposer. maybe you can trade it with a friend for one that suits your needs..

28

Angstrom & OpenZaurus / Allo Coredump

« on: January 15, 2005, 08:48:07 pm »

hi all...

a web browser works for me...

im using hentges ROM, and konqueror works on it for me..
i got it from  this feed

or am i misunderstanding?
was that what yall were referring to? or did you mean a preinstalled one?
anyhow.. great job coredump, keep up the good work