Messages

46

Angstrom & OpenZaurus / Removing -nossl Wpa_supplicant In Favor Of Ssl Ver

« on: September 04, 2005, 12:51:11 pm »

I have a Sharp SL-5500 "collie" with OpenZaurus/GPE 3.5.3 on it. I have a SanDisk ConnectPlus card that I want to use to get on my home wireless network (I did this succesfully before when I was using OPIE). The network uses WPA-EAP/TKIP with PEAP-MSCHAPv2 authentication, which requires the SSL version of wpa_supplicant to get on. Included in the OpenZaurus ROM image I have is a version of wpa_supplicant that doesn't have SSL. I have installed the SSL version to RAM but I'm having trouble removing the -nossl version. With it there, ipkg-link doesn't create symlinks to /media/ram/packages/ for the SSL version. If I type:

Code: [Select]

ipkg remove wpa-supplicant-nossl
ipkg responds:

Code: [Select]

Nothing to be done.
Even though it is installed:

Code: [Select]

root@collie:/# ipkg status wpa-supplicant-nossl
Package: wpa-supplicant-nossl
Version: 0.2.6-r3
Depends: libgcc1 (>= 3.4.3), libc6 (>= 2.3.2+cvs20040726)
Provides: hostap-wpa-supplicant-nossl
Replaces: hostap-wpa-supplicant-nossl
Conflicts: hostap-wpa-supplicant-nossl
Status: install ok installed
Architecture: arm

root@collie:/# ipkg files wpa-supplicant-nossl
Package wpa-supplicant-nossl (0.2.6-r3) is installed on root and has the following files:
/usr/bin/wpa_supplicant
/usr/bin/wpa_cli
/etc/wpa_supplicant.conf.sample
/usr/bin/wpa_passphrase
/etc/wpa_supplicant.conf
Any help here would be greatly appreciated.

47

Angstrom & OpenZaurus / Newbie: Proper Upgrade Procedure

« on: May 21, 2005, 04:15:15 pm »

Hi.

I'm relatively experienced with Linux on x86 (5 years), but this is my first foray into Linux in the embedded space. I recently purchased a refurbished Sharp Zaurus SL-5500 "collie". It has OpenZaurus 3.5.3 (32/32 kernel) on it. I would like to upgrade my packages to the latest versions, but "ipkg upgrade" only gets through a few packages before running out of space--which ends up truncating the QT/Embedded libs (libqte) and then the Zaurus won't boot into Opie. How should I go about upgrading my OpenZaurus installation to the latest version of available packages? Below, there is the output of the SSH session I tried to do this over. As a final related question, is the 32/32 kernel the best option? I have a 256MB CF card that I can use with this device, so maybe something else would be better?

Thanks,
Andrew

Code: [Select]

root@collie:/proc# ipkg update
Downloading http://openzaurus.org/official/unstable/3.5.3/upgrades//Packages.gz
Inflating http://openzaurus.org/official/unstable/3.5.3/upgrades//Packages.gz
Updated list of available packages in /usr/lib/ipkg/lists/upgrades
Downloading http://openzaurus.org/official/unstable/3.5.3/feed/base//Packages.gzInflating http://openzaurus.org/official/unstable/3.5.3/feed/base//Packages.gz
Updated list of available packages in /usr/lib/ipkg/lists/base
Downloading http://openzaurus.org/official/unstable/3.5.3/feed/libs//Packages.gzInflating http://openzaurus.org/official/unstable/3.5.3/feed/libs//Packages.gz
Updated list of available packages in /usr/lib/ipkg/lists/libs
Downloading http://openzaurus.org/official/unstable/3.5.3/feed/console/Packages.gz
Inflating http://openzaurus.org/official/unstable/3.5.3/feed/console/Packages.gzUpdated list of available packages in /usr/lib/ipkg/lists/console
Downloading http://openzaurus.org/official/unstable/3.5.3/feed/devel/Packages.gzInflating http://openzaurus.org/official/unstable/3.5.3/feed/devel/Packages.gz
Updated list of available packages in /usr/lib/ipkg/lists/devel
Downloading http://openzaurus.org/official/unstable/3.5.3/feed/opie/Packages.gz
Inflating http://openzaurus.org/official/unstable/3.5.3/feed/opie/Packages.gz
Updated list of available packages in /usr/lib/ipkg/lists/opie
root@collie:/proc# ipkg upgrade
Upgrading ipkg on root from 0.99.147-r1 to 0.99.148-r0...
Downloading http://openzaurus.org/official/unstable/3.5.3/upgrades//ipkg_0.99.148-r0_arm.ipk
Upgrading libipkg0 on root from 0.99.147-r1 to 0.99.148-r0...
Downloading http://openzaurus.org/official/unstable/3.5.3/upgrades//libipkg0_0.99.148-r0_arm.ipk
Not installing libipkg0 (0.99.148-r0) on root -- already installed.
Upgrading libqte2 on root from 2.3.10-r12 to 2.3.10-r14...
Downloading http://openzaurus.org/official/unstable/3.5.3/upgrades//libqte2_2.3.10-r14_collie.ipk
ipkg: write: No space left on device
Upgrading libts-0.0-0 on root from 0.0cvs20050403-r18 to 0.0cvs20050505-r18...
Downloading http://openzaurus.org/official/unstable/3.5.3/upgrades//libts-0.0-0_0.0cvs20050505-r18_arm.ipk
ipkg: //usr/lib/ipkg/info/libts-0.0-0.control: No space left on device
ipkg: //usr/lib/ipkg/info/libts-0.0-0.postinst: No space left on device
ipkg: /usr/lib/ts/collie.so: No space left on device
ipkg: /usr/lib/ts/mk712.so: No space left on device
ipkg: /usr/lib/ts/pthres.so: No space left on device
ipkg: /usr/lib/ts/variance.so: No space left on device
ipkg: /usr/lib/ts/linear_h2200.so: No space left on device
ipkg: /usr/lib/ts/arctic2.so: No space left on device
ipkg: /usr/lib/ts/dejitter.so: No space left on device
ipkg: /usr/lib/ts/ucb1x00.so: No space left on device
ipkg: /usr/lib/ts/corgi.so: No space left on device
ipkg: /usr/lib/ts/linear.so: No space left on device
ipkg: /usr/lib/ts/h3600.so: No space left on device
ipkg: /usr/lib/ts/input.so: No space left on device
ipkg: Cannot create symlink from ./usr/lib/libts-0.0.so.0 to 'libts-0.0.so.0.1.1': No space left on device
ipkg: /usr/lib/libts-0.0.so.0.1.1: No space left on device
can't get //usr/lib/ipkg/info/libts-0.0-0.control open for read
Configuring ipkg
/usr/bin/update-alternatives: 185: cannot create /usr/lib/ipkg/alternatives/ipkg.new: No space left on device
postinst script returned status 2
ERROR: ipkg.postinst returned 2
Configuring libipkg0
ldconfig: file /opt/QtPalmtop/lib/libqte.so.2 is truncated

ldconfig: file /opt/QtPalmtop/lib/libqte.so is truncated

ldconfig: file /opt/QtPalmtop/lib/libqte.so.2.3.10 is truncated

ldconfig: file /opt/QtPalmtop/lib/libqte.so.2.3 is truncated

ldconfig: Can't create temporary cache file /etc/ld.so.cache~: No space left on device
postinst script returned status 1
ERROR: libipkg0.postinst returned 1
Configuring libqte2
ldconfig: file /opt/QtPalmtop/lib/libqte.so.2 is truncated

ldconfig: file /opt/QtPalmtop/lib/libqte.so is truncated

ldconfig: file /opt/QtPalmtop/lib/libqte.so.2.3.10 is truncated

ldconfig: file /opt/QtPalmtop/lib/libqte.so.2.3 is truncated

ldconfig: Can't create temporary cache file /etc/ld.so.cache~: No space left on device
postinst script returned status 1
ERROR: libqte2.postinst returned 1
Configuring libts-0.0-0
ipkg_conf_write_status_files: Can't open status file: //usr/lib/ipkg/status for writing: No space left on device
ipkg_conf_write_status_files: Can't open status file: /media/cf/packages//usr/lib/ipkg/status for writing: No space left on device
ipkg_conf_write_status_files: Can't open status file: /media/card/packages//usr/lib/ipkg/status for writing: No space left on device
pkg_write_filelist pkg=ipkg returned 28
pkg_write_filelist pkg=libipkg0 returned 28
pkg_write_filelist pkg=libqte2 returned 28
pkg_write_filelist pkg=libts-0.0-0 returned 28
root@collie:/proc# df -h
Filesystem                Size      Used Available Use% Mounted on
/dev/mtdblock4           14.1M     14.0M    120.0k  99% /
/dev/mtdblock6           31.0M     18.0k     29.4M   0% /media/ram
tmpfs                    14.7M     52.0k     14.7M   0% /var
root@collie:/proc#