Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
thanks!!As about usb storage I guest you should load modules:
found the problem when i install pccardctl...
it's because i didn't install pcmciautils
now i got /dev/hda
[div align=\"right\"][a href=\"index.php?act=findpost&pid=160961\"][{POST_SNAPBACK}][/a][/div]
newbie question...cf card - /dev/hda
how do i mount my cf card or usb drive in debian?
i looked in /dev and couldn't find traditional ones like hda or sda
[div align=\"right\"][a href=\"index.php?act=findpost&pid=160944\"][{POST_SNAPBACK}][/a][/div]
I'm using 4 GB MMC in SD slot without any problems. Never ever had any problems at all with it, and I do copy a lot of files there all the time.What kernel/pdaXrom version you are using?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=160952\"][{POST_SNAPBACK}][/a][/div]
Well a lot may depend in the card and what you do withy it wht kernel you are using and what hardware you have.I have problem with 4G SD card.
I'm saying this because personally I've experienced odd behaviours on all my SD/MMC that are more than 1Gb ... but not everyone is afflicted by the problems I have ... hence there might be some issues with the card models, the type of data stored in them and how frequently the data is changed and/or the Zaurus model you are using.
Also a lot changes between the 2.4 and 2.6 SD kernel driver and also different models have different hardware (collie was without a SD driver for kernel 2.6 for a lot more time than the Cxx0 and C3x00/1000).
So in my experience I'd say:
"it depends ..."
[div align=\"right\"][a href=\"index.php?act=findpost&pid=160940\"][{POST_SNAPBACK}][/a][/div]
Did you test it on Zaurus. I talk with kernel mmc driver maintainer.QuoteQuoteLet me just check this before I make an unwise purchase: If I buy a 4G SD card but (for the time being at least) restrict my use of it to a partition covering the first 2G, then I should not have any problems? (To be more accurate, I should not have any problems _in_addition_ to those which I would have had had I bought a 2G card instead?)Don't buy SDHC SD card. Zaurus SD controller doesn't support SDHC.
...
I'm not sure that all nonSDCH 4G SD card will work correct on Zaurus.
Better test it before buy.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=160427\"][{POST_SNAPBACK}][/a][/div]
SDHC is software, not hardware.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=160434\"][{POST_SNAPBACK}][/a][/div]
Let me just check this before I make an unwise purchase: If I buy a 4G SD card but (for the time being at least) restrict my use of it to a partition covering the first 2G, then I should not have any problems? (To be more accurate, I should not have any problems _in_addition_ to those which I would have had had I bought a 2G card instead?)Don't buy SDHC SD card. Zaurus SD controller doesn't support SDHC.
...
svs57:I also tried Angrstorm's firefox with the same result.
Are you using firefox/iceweasel with your debian?
If so, did you build it yourself? I can't find armel firefox package anywhere. I've built firefox for Angstrom in OE, but it segfaults...
[div align=\"right\"][a href=\"index.php?act=findpost&pid=160247\"][{POST_SNAPBACK}][/a][/div]
Only on second part of 4G SD.Quote2. Problem with 4G SD. Suspend/resume destroy FS. It's happen only with SD>2Gany fixes on this? does this only happen on a 4g partition or all 4g cards?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=160068\"][{POST_SNAPBACK}][/a][/div]
Also i found the uncompressed module tarball with the kernel dir as "2.6.20.2-corgi". Do i need to rename it to "2.6.20.2"?No
[div align=\"right\"][a href=\"index.php?act=findpost&pid=159851\"][{POST_SNAPBACK}][/a][/div]
Back to Chero's guide again:Strange. u-boot should start autoboot.sh automaticly.
8. when it reboots, it will stop cause it has no init-files => put the card with system in it
9. put out the battery (and power), wait 5 secs, insert battery
10. debian boots.
I can get to step 8.
(I can only boot into the emergency system WITHOUT the batter)
When rebooting (first mount /dev/mmcblk0p1 /mnt/card; then run /mnt/card/autoboot.sh),
the system does stop and dim a little bit.
Then i take out the FAT card and insert the ext3 card with the system.
And then take out the AC, and wait 5 seconds.
Then I put in the battery.
Press On. Darkness. Nothing ....
[div align=\"right\"][a href=\"index.php?act=findpost&pid=159847\"][{POST_SNAPBACK}][/a][/div]
Could someone please explain how I get X running ?Try
I can boot, set my keymap, get wireless going, apt-get, ... But no X.
I set /proc/sys/kernel/hostname to "zaurus"
installed xorg and icewm
installed angstrom-xserver
did "export DISPLAY=:0" (also tried "export DISPLAY=zaurus:0")
but when I "startx" I get "could not connect to display" or something like that.
What can I do ? Do I need a modified "startx" ?
Chero.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=159831\"][{POST_SNAPBACK}][/a][/div]
