Messages

136

Angstrom & OpenZaurus / Minimo Installation Problem

« on: January 14, 2006, 12:09:47 am »

Stupid me, I'd forgotten to ipkg-link both minimo and libxt6...

But now when I launch minimo from the terminal nothing happens... No error messages, nothing.

137

Angstrom & OpenZaurus / Minimo Installation Problem

« on: January 13, 2006, 11:52:31 pm »

I have OZ 3.5.4rc with GPE running on my collie.

After I updated the feeds, I downloaded and installed minimo to my sd card.

However, when I try to run it I get:

exec: 4: ./Minimo not found

Any ideas?

138

Angstrom & OpenZaurus / Gpe Usb Problem

« on: January 13, 2006, 11:12:23 pm »

UPDATE: It seems the problem was the APM hack in the Xserver file in /etc/X11. After I removed the two relevant lines, I have no problems whatsoever.

139

Angstrom & OpenZaurus / Important Fix For Oz 3.5.4-rc Need Testing

« on: January 13, 2006, 10:48:23 pm »

It does indeed fix usb networking not working after suspend!

140

C1000/3x00 General discussions / C3100 Shipped Should Be Here Soon :o)

« on: January 13, 2006, 09:11:43 pm »

Congrats!

I'm in the same boat, my 3100 will be here on Monday (took about 2 weeks to get here!).

141

Angstrom & OpenZaurus / Gpe Usb Problem

« on: January 13, 2006, 12:04:55 pm »

I have to say GPE is great.

However, I can't get Windows XP to recognize the Z correctly (I am using OZ 3.5.4).

I keep getting a "USB Device Not Recognized" error.

Also, on Ubuntu 5.10 when I "lsusb" with the Z connected I don't see it in the list of USB devices.

What's wrong?

142

5x00 General discussions / Weird Problem With 5500 And Symbol Cf Wifi Card

« on: January 13, 2006, 09:51:30 am »

This is really weird...

Today, while the card was warm from being inside the Z, it would not accept SSH connections (it would switch off) nor any internet activity.

So I did a little experiment - I took it  off and put it in the fridge for a few minutes. After that, it worked great until it became warm again - suddenly the connection was dropped.

Is my card busted?

143

Angstrom & OpenZaurus / Gpe Advice

« on: January 11, 2006, 01:15:30 pm »

Hi guys,

I recently flashed my Collie with OZ 3.5.4 and GPE... Everything  works ok, but I can't find a web browser anywhere!

I've set up WiFi and I can access the internet... I've also edited the ipkg.conf files to point to the utwente.nl feed...

But I can't find dillo or minimo or any other browser in the feed!

Any ideas?

144

5x00 General discussions / Weird Problem With 5500 And Symbol Cf Wifi Card

« on: January 11, 2006, 12:27:42 pm »

I flashed my collie with Sharp's 3.13 ROM and the Symbol card exhibits the same behaviour... :-(

Any ideas?

145

5x00 General discussions / Weird Problem With 5500 And Symbol Cf Wifi Card

« on: January 11, 2006, 12:10:00 pm »

I have a 5500 running OZ 3.5.4 with GPE. Everything's working smoothly except for one thing:

My Symbol Wifi CF card is recognized correctly, starts working, and after a few minutes it seems to turn itsself off - the connection is lost, the CF Manager reports the card as "not ready" and the only way to make it work agaiin is to eject it and reinsert it, and again of course it stops working after a few minutes.

For the few minutes the card works, I can ping back and forth OK and internet  also works.

Any ideas? Could my card be busted? It's not even 2 months old!

P.S. I notice that it does get very warm indeed, even after a few minutes of usage... Is this supposed to happen?

146

C1000/3x00 General discussions / I Finally Went Ahead...

« on: January 08, 2006, 09:18:27 am »

I went ahead and ordered a pack of NuShield protectors - somehow I like the idea of a non adhesive SP.

A friend of mine uses a Brando SP on his cellphone/pda and it really is great... ;-)

Another question:

I am now downloading the Cacko 1.23 rom for C3100.

From what I understand, there is an overclock utility included, allowing speeds of up to 624 MHz. Is this correct? Are there any problems with the implementation?

147

C1000/3x00 General discussions / I Finally Went Ahead...

« on: January 07, 2006, 02:00:04 pm »

Guys, I need your help!

The 3100 will be here on Monday, and I just realized I don't have any screen protectors for it!  

On my 5500 I don't use one and the screen is scratch free, strange as it may sound. I don't use HWR though.

Since the 3100 cost me 5x the money, I feel inclined to use a screen protector.

What are your reccomendations?

I have heard good things about NuShield (I like the idea of a non-adhesive SP, but do they stay in place?) and pdascreenprotectors.com.

148

C1000/3x00 General discussions / Network Configuration

« on: January 03, 2006, 07:16:17 am »

If your Z is connected to your PC which in turn is connected to the Internet, you have to (for Windows):

1) Enable Internet Connection Sharing for your PC's internet connection - just select the Z Virtual Ethernet Adapter from the list.

2) Go into the Z's Virtual Ethernet Adapter settings on your PC and enter the following:

IP: 192.168.0.1
Subnet Mask: 255.255.255.0
Gateway: 192.168.0.1

and for DNS enter your router's ip adress to your PC (usually 192.168.1.1)

3) On your Z, go to usbd0 settings (Usb ethernet) and enter 192.168.0.2 for IP and the rest of the settings above for the rest. For DNS also use 192.168.1.1

If all goes well, you should be able to ping your PC (192.168.0.1) as well as, say, www.google.com.

149

C1000/3x00 General discussions / I Finally Went Ahead...

« on: January 03, 2006, 05:58:42 am »

Still no notification in my mailbox.. :-(

Hoping for tommorow!

P.S. A month ago I bought a used Vaio C1 off eBay from the U.K. that took 10 days to arrive via ParcelForce...

150

C1000/3x00 General discussions / Which Unit(s) Do You Own?

« on: January 02, 2006, 12:35:13 pm »

I currently have a 5500 with OZ 3.5.4rc on it.

A brand new C3100 is in the mail, will probably be here within the next few days.