Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - dproldan

Pages: 1 2 3 [4]
46
C1000/3x00 Hardware / Usb Client And Host At The Same Time?
« on: June 20, 2006, 09:24:49 am »
Uhm,  nope.   This is from his site:

Quote
I've never used the Zaurus as an USB client (nor have any desire to do that in future), so I decided to drop usb client functionality completely and to change the Sharp's OHCI glue driver accordingly.

  Maybe, I hope,  it's only a matter of modifying the driver.

47
C1000/3x00 Hardware / Usb Client And Host At The Same Time?
« on: June 19, 2006, 10:09:52 pm »
Would it be possible to use the internal usb port that arlbertr uses while keeping the external one as a client/host?

  Finding a way to do this,  would allow us to put usb BT dongles or a USB microdrive inside the C1000,  efectively turning it into a C3x00 of sorts.  I don't want to loose the client functionality.

48
C1000/3x00 Hardware / Current Consumption
« on: June 13, 2006, 02:31:28 pm »
Hi,  I made some current measurements with an ampmeter trying to find the most efficient light setting.
  These are made with a SL-C1000 running cacko 1.23. from the battery with the wiring shown it the attached picture.

 level 1: 200 mA
 level 2: 205 mA
 level 3: 215 mA
 level 4: 230 mA
 level 5: 270 mA
 level 6: 315 mA

  While boting cacko, it consumes around 320 mA.

  These are average measurements during one minute without doing anything with the zaurus.

  I decided to leave the setting at level 3 for battery use,  as the current diference isn't too big.

  I'll try to make some measurements with the powernowd utility that Albertr has released.

49
Software / Which Game Emulators Run At Full Speed?
« on: June 12, 2006, 11:59:40 am »
fMSX works at full speed when used with "-lowres".

50
General Discussion / Newton Emulator On Sl-c1000
« on: June 03, 2006, 04:06:00 pm »
I got the Einstein emulator running on a SL-C1000 zaurus using OZ/gpe!  It is awfully slow at the moment,  but so cool!

http://www.kallisys.com/newton/einstein/

51
Angstrom & OpenZaurus / Altboot 2nd Option Doesn't Work
« on: June 03, 2006, 01:37:30 pm »
Is there any other way to boot the zaurus without having X started?

  thanks

52
SIMpad forum / Broken Touch Screen.....
« on: June 01, 2006, 09:31:07 pm »
At the same situation as you,  I bought one of those cheap swisscom ISDN simpad models (~150 eur).

  They are new and come with a charging cradle, a few stylii and a power adaptor.

  I changed the whole screen and still have a spare battery,  front and back cases, etc if anything else breaks.

53
Spain / Ya La Tengo En Casa
« on: May 19, 2006, 10:25:55 am »
 

  Por cierto,  y siento no haberlo dicho antes, a_martin, pero para los que piensen comprar una zaurus,   no es necesario pedir el cargador europeo a japon,   un cargador de PSP funciona perfectamente,  y se puede encontrar muy barato en España.

54
Spain / Ya La Tengo En Casa
« on: May 19, 2006, 10:19:59 am »
Enhorabuena!

  EL cable USB que viene en la caja es USB Client,  o sea,  para conectar el Zaurus al ordenador.  Y el cable que pediste,  seguramente,  USB Host,  para conectarle teclados, ratones, memorias, etc.   Son diferentes y, en mi opinion, viene muy bien tener los dos.

  Si el segundo cable que te han enviado tiene los mismos conectores que el de la caja, es que ha habido una equivocacion.

  El puerto que esta tapado no tiene ningun uso de momento para el usuario.

55
Spain / Ya Tengo Mi Akita!
« on: May 11, 2006, 07:27:37 pm »
Bueno, ya tengo esta preciosidad en mis sucias manos...  :-)

  La verdad es que estoy alucinando,  lo unico que le he hecho ha sido pasarla a ingles con lo del "locale=en",  o sea, que estoy con la ROM original,  pero se nota el potencial que tiene.

  He visto una cosa rara,  a ver si podeis mirar los que tengais un SL-Cxx00 :
- cuando pongo la pantalla en modo "tablet", la pantalla no queda plana sobre el teclado,  sino que esta un poco mas separada por el frontal que por la bisagra: foto adjunta.

 Le pasa lo mismo a las vuestras?

56
Spain / Ya La Tengo!
« on: May 06, 2006, 02:23:20 pm »
Bueno,  ya me la ha enviado!  y me dice que ha puesto 11.000 yenes como valor declarado...  vaya pirata  :-)  pero bueno,  asi se salta la aduana.

  Esto viene a ampliar mi coleccion de PDA's:

 - REX 6000
 - Hitachi PMC-1000
 - Yopy YDK-1000
 - Newton MP2100 (x2)
 - Simpad SL-4

  Ya, ya lo se,  es como un vicio que tengo... ;-)

  Me he instalado el emulador y las herramientas de desarrollo,  asi que espero portar algunos programillas interesantes y traducir alguna de las distribuciones.

57
Spain / Ya La Tengo!
« on: May 06, 2006, 02:19:13 pm »
Bueno,  ya me la ha enviado!  y me dice que ha puesto 11.000 yenes como valor declarado...  vaya pirata  :-)  pero bueno,  asi se salta la aduana.

  Esto viene a ampliar mi coleccion de PDA's:

 - REX 6000
 - Hitachi PMC-1000
 - Yopy YDK-1000
 - Newton MP2100 (x2)
 - Simpad SL-4

  Ya, ya lo se,  es como un vicio que tengo... ;-)

  Me he instalado el emulador y las herramientas de desarrollo,  asi que espero portar algunos programillas interesantes y traducir alguna de las distribuciones.

58
Spain / Ya La Tengo!
« on: May 05, 2006, 01:54:04 pm »
Yo les he hecho la transferencia hace un rato,  han hecho falta 3 dias para que apareciera el dinero en MoneyBookers.  En estos dias, ha bajado el cambio a yen y me ha salido por 290 euros  :-)
 
  Sabes si es que PriceJapan tiene los c1000 en stock?


 fportillo,  cuando me llegue el zaurus hablamos de simpad!

59
Spain / Ya La Tengo!
« on: May 02, 2006, 05:28:39 pm »
Yo tambien he pedido un sl-c1000 a pricejapan,  estoy esperando a que salgan los fondos en MoneyBookers para pagarselo.  unos 300 euros con el cable usb host.

  Mientras espero,  a vender mi Simpad...  

Pages: 1 2 3 [4]