Author Topic: vnc client in sl5600 (Read 5403 times)

naanu · « **on:** March 29, 2004, 10:17:31 am »

I\'m a newbie and need some help installing vnc client on zaurus.
I have the original rom supplied by sharp. The vnc server runs fine on my zaurus and I could see my Zaurus on my xp desktop. However, when I run keypebble on my zaurus, it says \"hostname wrong\". The keypebble I installed was opie-keypebble-sharprom 1.0.0 sharprom.ip

I would appreciate any help

Thank you

lardman · « **Reply #1 on:** March 29, 2004, 10:24:15 am »

What are you putting as the hostname?

naanu · « **Reply #2 on:** March 29, 2004, 10:28:36 am »

I\'ve tried the ipadress as well as the hostname of the xp. xp\'s ip address is 192.168.0.1 and zaurus is 192.168.0.175

lardman · « **Reply #3 on:** March 29, 2004, 10:40:02 am »

And presumably you have a VNC server running on the XP machine?

Assuming this is the case, do you have a non-standard port setting for the server? Do you have a firewall up on the PC?

Simon

naanu · « **Reply #4 on:** March 29, 2004, 10:48:20 am »

I\'m unaware of setting up the port. And there are no firewalls on the xp pc. As a matter of fact, I\'ve another linux pc (debian) which is connected to xp via crossovercable. And when i run vnc client from debian, I can see the xp machine.

Thanks for the help

lardman · « **Reply #5 on:** March 29, 2004, 10:52:30 am »

I presume you\'re running on a 5500 considering that you got the VNCserver to run without troubles. Which ROM?

Can you ping? (ie. do you have network comms between your Z and PC?)

Si

naanu · « **Reply #6 on:** March 29, 2004, 11:00:46 am »

Oh yes, I can ping and everything works well in this network. I have a ambicom wireless card connected to zaurus and i can connect to the xp machine. I even loaded shared drive from xp to 5600 using smbmount.

lardman · « **Reply #7 on:** March 29, 2004, 11:12:46 am »

Fair enough, I don\'t know then.

The obvious one is that the vnc viewer isn\'t working, but I\'ve not tried the latest version (because it won\'t/wouldn\'t let me have a local server) so I can\'t say for sure that this is or isn\'t the case.

Sorry,

Si

naanu · « **Reply #8 on:** March 29, 2004, 11:17:01 am »

thanks anyways, I would appreciate if you could let me know where I can find the latest version of keypebble or is there any other application that can do the task.

treke · « **Reply #9 on:** March 29, 2004, 11:22:04 am »

Quote

thanks anyways, I would appreciate if you could let me know where I can find the latest version of keypebble or is there any other application that can do the task.

1.0 is the latest version of keypebble

lardman · « **Reply #10 on:** March 29, 2004, 11:30:38 am »

I use an old version - probably the one from the OZ3.2 feed. You\'ll have to install/package this yourself manually though.

Si

treke · « **Reply #11 on:** March 29, 2004, 12:21:28 pm »

Well, other than a bug fix related to opie\'s virtual keyboard, keypebble hasnt changed in over a year.

lardman · « **Reply #12 on:** March 29, 2004, 05:35:50 pm »

It may be even older then, but I thought OZ 3.2 was more than a year old now?

If it\'s not then I\'m using one of the ones from a pre 3.2 snapshot (it has a name with a date in it), certainly before it was possible to set the view scaling anyway.

Anyway, I sort of stopped needing to use it so didn\'t bother to try fixing the problem and submitting a patch etc.

Si

treke · « **Reply #13 on:** March 29, 2004, 06:12:22 pm »

Hehe. Same here. There is plenty of stuff to do if anyone actually cares about a vnc client. ( Server side scaling, better encodings, support for the new tightvnc file transfer protocol)

naanu · « **Reply #14 on:** April 01, 2004, 11:57:47 pm »

For some reason I missed the bookmark column and this was why the vnc viewer was not working. How stupid I was?

Thanks for all your help anyway!

News:

Author Topic: vnc client in sl5600 (Read 5403 times)