Hi all,
if anyone of you tried the sound recorder app that comes with 3.5.1, you probably produced samples of length 0.00 seconds - at least that's what happened to me. Turns out it can be fixed quite easily: edit /root/Settings/OpieRec.conf and in the [Hardware] section, add or modify these two lines:
Audio = /dev/dsp1
Mixer = /dev/mixer1
You should now be able to record audio with these caveats:
- It seems that opie-recorder severely miscalculates maximum allowable sample duration (there must be a multiplication error somewhere). The upshot is that if you leave Limit Size (under Options) at Unlimited, recording will automatically stop after as little as a second (with 10MB of free storage left). The solution is to set Limit Size to the highest possible numerical value, i.e. 60.
- If you change sample rate or bit depth, it is a smart move to shut down and re-start opie-recorder. Otherwise you will get .wav files with incorrect sample rate specifications - to great comic effect I must say.
- You will not be able to play back what you record, because while /dev/dsp1 is the correct device for recording, /dev/dsp is the one for playback. opie-recorder currently does not support specifying one device for recording and another one for playback. Workaround: use xmms-embedded to play back your wav files. Alternatively, you can keep two versions of OpieRec.conf and set up scripts which will run opie-recorder with the proper version depending on whether you want to record or play back.
- As for mixers, both /dev/mixer and /dev/mixer1 seem to work fine for playback although I once got an infinite loop with one of them, forcing a soft-reboot (can't remember which device it was, though). For recording, /dev/mixer1 seems logical (although I haven't actually tried altering input volume).
Hope this helps.
z.
