Trying to get Socket rev G Bluetooth to work...

[bastichelaar]

Is ther anyone who has this card working with pdaXrom? Please help me...

[Reaper]

Try to use the same technique I described at the topic about network card. Just edit the entry "Modems and other serial devices" and bind "serial_cs". You can get card's exact name and manfid by running cardctl info.

[bastichelaar]

I tried it my own way  I downloaded bluez from the bluetooth howto on ZUG, and applied the bluez-csr-serial patch and commented out the lines regarding the Socket card. Then I removed the lines modprobe rfcomm and modprobe l2cap from /etc/rc.d/init.d/bluetooth (they are already loaded in the kernel, which are newer versions). Then I tried to pair and make a GPRS connection and suddenly it worked!

Thanks for your reply!

[hackfixer]

I've got a C860 with pdaXrom 1.10rc5 and I cant seem to get bluetooth working.

I have a :
  Anycom CF-300  - no drivers available
 Ambicom BT2000-CF model C - no drivers available
so I order a Socket CF Bluetooth card, Rev H,
modified my /etc/pcmcia/bluetooth.conf so that the  card is
set to use serial_cs.

After inserting the card, I see the message:
  cardmgr[130]: socket 0: Socket Bluetooth Card
  ttyS03 at port 0xf60003f8 (irq = 39) is a 16C950/954

I ran modprobe hci_uart which appears to load fine

I've tried hciattach every which way I've read, but always seem to get:
   BCSP initialization timed out

Anyone get this new revision Socket card working?

Regards,
   Steve