← previous next →
Pages: [1]

Author Topic: Linksys wcf12  (Read 3616 times)

Guest_Nathan

  • Guest
Linksys wcf12
« on: July 30, 2004, 05:28:48 pm »
Hello,

I'm having problems getting wireless connectivity with a Linksys WCF12 card in my SL-5500.  I've followed all of the steps in the manual to enable wireless, but I still can't connect.  I'm using ROM version 2.38.  There seems to be some discussion about needing to change a config file manually, but I couldn't find anything specific to my ROM.  Any help would be appreciated.

Thanks,
Nathan
Logged

Omicron

  • Hero Member
  • *****
  • Posts: 608
    • View Profile
    • http://
Linksys wcf12
« Reply #1 on: July 30, 2004, 05:55:59 pm »
Which card and router are you using ??

I would turn off WEP and allow 5500 to connect to any device.

Also, I found that if the router is on channel 11 (for example) then you need to change the 5500 network to be AD HOC to enable channel field to be editable, then change channel to 11 then change back to 5500 back to INFRASTRUCTURE.

Once WEP and channel are straigntened out, then tell the 5500 the exact NAME of the network and have the router stop broadcasting it...then make sure everything still works,

Then last turn on WEP and enable same ey and again make sur all is okay.

Get everything working then worry about non-brodcasting and WEP and lastly MAC addresses if you want to be real secure.

Hope this helps.
Logged
"You Shall Not Pass"    
....Gandalf, Lord Of The Rings
--------------------------------------------------------------
C-860 (Cacko), 3x4gb MD  
DLINK 660W, 1GB SD,  
Upgraded Archos AV320 w/80GB HDD
Pocketop and Targus IR keyboards
Favorite Deal Site: SaveCity.net (pretty cool, good deals daily on one page)

corster

  • Newbie
  • *
  • Posts: 38
    • View Profile
Linksys wcf12
« Reply #2 on: July 31, 2004, 10:57:58 am »
I have a WCF12 card and I _thought_ that I had no connection and learned that all I had to do was click on the little crossed-out world that shows up on the taskbar and then click "connect". I don't know if this is what your problem is, but it worked for me

-cor-
Logged

Guest_Nathan

  • Guest
Linksys wcf12
« Reply #3 on: August 02, 2004, 11:24:37 am »
I'm using a LinkSys WCF12, 802.11b wireless card.

I am trying to connect to a university network so I don't have access to the network/router settings.  I know the ESSID, and I know that WEP is not enabled.

Unfortunately, I don't see any crossed out world on the taskbar.

There are two other things I've noticed that seem a bit odd but may or may not be related.  First, in the "Network & Sync" settings I have added a "LAN - TCP/IP" service with no proxies and "obtain TCP/IP Information Automatically" (all correct for my network), but on the "Current" tab it doesn't list my TCP/IP service, it only says "This is the state of your running network services".  Second, I don't get any kind of acknowledgement from the 5500 when I insert my card.  The green "link" light comes on on the card itself, but the 5500 doesn't do anything that I can tell.

Thanks for the help so far,
Nathan
Logged

Guest_Nathan

  • Guest
Linksys wcf12
« Reply #4 on: August 02, 2004, 11:27:18 am »
Also, the network I'm am trying to connect to uses several different channels in different areas of the building, so it would be nice not to have to lock into a single channel.  I can find out which channels are used and switch manually if I have to, but I'd prefer to avoid that.
Logged

corster

  • Newbie
  • *
  • Posts: 38
    • View Profile
Linksys wcf12
« Reply #5 on: August 02, 2004, 12:24:54 pm »
Oh, I just noticed you are using the older ROM... I have no experience with this... when I got my Z I just Flashed directly to 3.10 and when I inserted the wfc12 card it just worked after I added the wireless connection in "network". It is possible that you may have to do some configuration, but that is beyond the little bit that I have learned so far  I would suggest upgrading to the newer ROM, but I don't know how much work you have put into it. Also, and I am not a wifi expert, I thought that channels were more for peer-to-peer adhoc connections. Your configuration, if indeed a standard "hotspot" connection, may need to be set to "infrastructure".

Good Luck!

-cor-
Logged

cascadefx

  • Newbie
  • *
  • Posts: 30
    • View Profile
    • http://
Linksys wcf12
« Reply #6 on: August 02, 2004, 01:25:08 pm »
Quote
Oh, I just noticed you are using the older ROM... I have no experience with this... when I got my Z I just Flashed directly to 3.10 and when I inserted the wfc12 card it just worked after I added the wireless connection in "network". It is possible that you may have to do some configuration, but that is beyond the little bit that I have learned so far  I would suggest upgrading to the newer ROM, but I don't know how much work you have put into it. Also, and I am not a wifi expert, I thought that channels were more for peer-to-peer adhoc connections. Your configuration, if indeed a standard "hotspot" connection, may need to be set to "infrastructure".

Good Luck!

-cor-
If I recall, you have to have the 3.10 ROM for the 5500 for the wcf12 to "just work" otherwise you have to set up the driver profile in the wlan-ng.conf (I think) file.

Some user comments in this web page tell how to fix it...
http://www.enotalone.com/electronics/B00006ELLL.html


There is also this great thread on the Kismet site that explains the process: http://www.kismetwireless.net/Forum/Genera...53974839.417335
« Last Edit: August 02, 2004, 01:28:09 pm by cascadefx »
Logged
Zaurus SL-5600
Sharp 1.0 ROM
256 SanDisk Secure Digital Card (fat16)
Linksys WCF12 wireless card

eigen

  • Newbie
  • *
  • Posts: 3
    • View Profile
Linksys wcf12
« Reply #7 on: August 02, 2004, 02:45:33 pm »
The link posted above is the what I used to get my wcf12 card working.
Logged
Pages: [1]
← previous next →