OESF Portal | OESF Forum | OESF Wiki | LinuxPDA | #planetgemini chat on matrix.org | #gemini-pda chat on Freenode | #zaurus and #alarmz chat on Freenode | ELSI (coming soon) | Ibiblio


Welcome Guest ( Log In | Register )

Reply to this topicStart new topic
> Help Request: Bluetooth Bt0100m - D-link Clone
post Nov 23 2004, 08:37 AM
Post #1

Group: Members
Posts: 1
Joined: 22-November 04
Member No.: 5,565

Hi Everyone,

Trying to get my Bluetooth card working on my 860. The card identifys itself as "Bluetooth BT0100M" which seems to be a clone of the Dlink DCF650BT, which is listed as having working in the "Bluetooth Card Support" list here on ZUG.

I have used the search, but most of the info I have found is for Sharp-based ROM's not pdaXrom (which I think is great BTW).

What I have done:

On fresh installation, installed all bluez packages from pdaxrom.org feed.

Added card entry into /etc/pcmcia/bluetooth.conf :

card "IOGear CF Bluetooth"
 version  "Bluetooth BT0100M"
 bind "serial_cs" class "bluetooth"

Inserting card with hci_uart module loaded:

cardmgr[4330]: socket 0: IOGear CF Bluetooth
ttyS03 at port 0xf60003f8 (irq = 39) is a 16550A

Trying some of the things I found in older threads:

#cardctl resume 0
ioctl(): Device or resource busy
# hciattach /dev/ttyS3 bcsp 230400
BCSP initialization timed out
#hcitool dev
# hciconfig
hci0:        Type: UART
              BD Adress: 00:00:00:00:00:00 ACL MTU: 0:0  SCO MTU: 0:0
              RX bytes: 0 acl:0 sco:0 events:0 errors:0
              TX bytes: 4 acl:0 sco:0 commands: 1 errors:0

I'm close, just not sure what to try/do next to get this first part of the bluetooth setup done.

PdaXrom doesn't use /etc/bluetooth/uart ?? Correct?

Thanks in advance,
Go to the top of the page
+Quote Post
post Nov 24 2004, 08:29 PM
Post #2

Group: Members
Posts: 18
Joined: 24-November 04
Member No.: 5,606


hciattach /dev/ttyS03 bcsp 230400
Go to the top of the page
+Quote Post
post Nov 25 2004, 12:45 AM
Post #3

Group: Members
Posts: 383
Joined: 3-December 03
Member No.: 1,038


I think that the error you get get doing cardctl is not a good sign.

Can you try:
cardctl scheme CardResume
and post your /var/log/messages entries while doing so?
Go to the top of the page
+Quote Post
post Nov 25 2004, 02:17 AM
Post #4

Group: Members
Posts: 11
Joined: 27-October 03
Member No.: 774

I have a card BT-CF Billionton (Chronos).
I try:
# setserial /dev/ttyS3 baud_base 921600
# hciattach /dev/ttyS3 bcsp

card work ok.
try it...
Go to the top of the page
+Quote Post

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:


RSS Lo-Fi Version Time is now: 22nd March 2019 - 01:08 AM