Author Topic: Ambicom Bt 2000 E And 5600 Problems...  (Read 1823 times)

sleepy

  • Newbie
  • *
  • Posts: 33
    • View Profile
Ambicom Bt 2000 E And 5600 Problems...
« on: March 30, 2005, 09:08:49 pm »
I've got an ambicom BT2000-CF (yellow sticker) and am having issue with bluetooth on OZ 3.5.2. Searching through the forums seems to suggest that this card should work and I've had no problems with the bluez stuff with the Sharp ROM (1.32) or Watapon (1.4).

I installed task-opie-bluetooth and for good measure installed the libs from the bluetooth kernel from another thread (bluecard_cs.o and friends). "Cardctl ident" gives me:

Socket 0:
    Product info: "Ambicom,Inc", BT2000E, "Bluetooth PC/CF Card"
    manfid: 0x22d, 0x2000
    function: 2 (serial)
Socket 1:
    no product info available

 but "hciconfig hci0 up" gives me:

Can't open HCI socket: Address family not supported by protocol

After a "modprobe bluez" followed up with an "hciconfig hci0 up" I get:

Can't get device info: No such device.

Needless to say, the bluetooth manager also does not indicate any BT card. Am I missing something obvious here? Any tips or suggestions would be much appreciated.

dreadlocks

  • Jr. Member
  • **
  • Posts: 71
    • View Profile
    • http://zaurus.nayr.net
Ambicom Bt 2000 E And 5600 Problems...
« Reply #1 on: March 30, 2005, 10:56:43 pm »
RETIRED - Zaurus SL-5600 (and a dead 5000D)
Wapaton 1.6.1 - Personal Watapon Feed
SMC 2642W & Linksys WCF12, Targus Universal IR Keyboard
Sandisk 512mb SD, Lexar 64mb SD, Sharp Camera
Extreme Limit Metal & Leather Suit

sleepy

  • Newbie
  • *
  • Posts: 33
    • View Profile
Ambicom Bt 2000 E And 5600 Problems...
« Reply #2 on: March 30, 2005, 11:28:13 pm »
Thanks for the links but I'm using OZ 3.5.2. I actually did use those instructions when setting up bluetooth (with the same card) using the Sharp/Watapon ROM and it worked great!

My impression was that OZ has a different kernel config so those instructions won't apply.

dreadlocks

  • Jr. Member
  • **
  • Posts: 71
    • View Profile
    • http://zaurus.nayr.net
Ambicom Bt 2000 E And 5600 Problems...
« Reply #3 on: March 31, 2005, 12:26:26 am »
oops, I misread your post.. I thought you said you had problems with the Sharp/Watapon rom too..
the kernel config is diffrent but the kernel version is the same, the modules might load or they might give you a bunch of unresolved symbols.. it may be worth a shot to give it a try.
RETIRED - Zaurus SL-5600 (and a dead 5000D)
Wapaton 1.6.1 - Personal Watapon Feed
SMC 2642W & Linksys WCF12, Targus Universal IR Keyboard
Sandisk 512mb SD, Lexar 64mb SD, Sharp Camera
Extreme Limit Metal & Leather Suit

endeey

  • Newbie
  • *
  • Posts: 14
    • View Profile
Ambicom Bt 2000 E And 5600 Problems...
« Reply #4 on: April 14, 2005, 09:40:53 pm »
do you have the bt950 module installed? try a search in the oz forum for "bt950" if you need to install it.
-endeey