Author Topic: A Couple Of 802.11b Cards For Sale  (Read 1511 times)

albertr

  • Hero Member
  • *****
  • Posts: 535
    • View Profile
    • http://
A Couple Of 802.11b Cards For Sale
« on: May 10, 2005, 09:34:24 pm »
I have plenty of hardware toys, and since I'm thinking of starting another project, I'd like to sell a couple of wireless cards which I didn't use very often to recoup some of the money to fund the project, so here it goes:

- Generic Prism3 802.11b USB1.1 wireless dongle. It works with prism2_usb driver from linux-wlan-ng project, and should also work with wi driver in OpenBSD (although I didn't have a chance to test it under OpenBSD) should you install OpenBSD on your C1K/C3K. It has a primary fw 1.1.4 and station firmware 1.8.3. Could be used on SL-6000 and C1K/C3K. Please note, that with C1K/C3K it will require a powered hub, since C1K/C3K can't provide sufficient power on usb bus. Also, note that you still need a cable to connect it to mini-A usb connector on the Zaurus.

- Pretec Prism2.5 CF type I card. I've upgraded firmware to primary 1.1.1 and station 1.7.4 to fix hardware encryption problem. Card works fine with hostapi driver, should also work with prism2_cs from limux-wlan-ng project and orinoco driver. Nothing much to say about this card, it's rather small and it works. Here's a thread about it in case you need more info: https://www.oesf.org/forums/index.php?showtopic=3572

- Pretec Bluetooth 1.1 CF type I card. That's the old  BT2000E model which is well-supported by BlueZ and Affix.

Each card is $20. Shipping within continental US is at flat rate $5 for USPS Priority. Outside of continental US - at actual rate at your expense. I don't think I have original boxes and packing materials, I'll try to locate windoze drivers (in case you need them), but no guarantee. It's for Zaurus, afterall.

Any questions? Please don't hesitate to ask.
-albertr

kahm

  • Hero Member
  • *****
  • Posts: 657
    • View Profile
A Couple Of 802.11b Cards For Sale
« Reply #1 on: May 10, 2005, 10:36:31 pm »
Quote
I have plenty of hardware toys, and since I'm thinking of starting another project, I'd like to sell a couple of wireless cards which I didn't use very often to recoup some of the money to fund the project, so here it goes:

- Generic Prism3 802.11b USB1.1 wireless dongle. It works with prism2_usb driver from linux-wlan-ng project, and should also work with wi driver in OpenBSD (although I didn't have a chance to test it under OpenBSD) should you install OpenBSD on your C1K/C3K. It has a primary fw 1.1.4 and station firmware 1.8.3. Could be used on SL-6000 and C1K/C3K. Please note, that with C1K/C3K it will require a powered hub, since C1K/C3K can't provide sufficient power on usb bus. Also, note that you still need a cable to connect it to mini-A usb connector on the Zaurus.

- Pretec Prism2.5 CF type I card. I've upgraded firmware to primary 1.1.1 and station 1.7.4 to fix hardware encryption problem. Card works fine with hostapi driver, should also work with prism2_cs from limux-wlan-ng project and orinoco driver. Nothing much to say about this card, it's rather small and it works. Here's a thread about it in case you need more info: https://www.oesf.org/forums/index.php?showtopic=3572

- Pretec Bluetooth 1.1 CF type I card. That's the old  BT2000E model which is well-supported by BlueZ and Affix.

Each card is $20. Shipping within continental US is at flat rate $5 for USPS Priority. Outside of continental US - at actual rate at your expense. I don't think I have original boxes and packing materials, I'll try to locate windoze drivers (in case you need them), but no guarantee. It's for Zaurus, afterall.

Any questions? Please don't hesitate to ask.
-albertr
[div align=\"right\"][a href=\"index.php?act=findpost&pid=79174\"][{POST_SNAPBACK}][/a][/div]

I'd be interested in the two pretec cards.
Fujitsu U8240 "Stormtrooper" -  Zaurus Supplement
Libretto U100 | Sony Librie, Sony Reader
SL-C3100: Sharp 1.11JP (Kanji Dictionary/Translator) - LCD Top swap with C1000.
SL-C3000: pdaXii13 5.4.7, SL-C3000 5.4.9 - microdrive replaced with 8gb Sandisk
SL-C1000: PDAXRom Beta3 | SL-6000L: Sharp 1.12 | SL-5500: Cacko, 64-0 kernel | SL-5000D: OZ-Opie
Linksys WCF12; Sharp CE-AG06, CE-RH2, CE-170TS; iRiver USB OTG Host cable; Socket BT rev.E CF; Hitachi 6gb Microdrive

akpoff

  • Jr. Member
  • **
  • Posts: 71
    • View Profile
    • http://
A Couple Of 802.11b Cards For Sale
« Reply #2 on: May 11, 2005, 08:12:13 pm »
Quote
I have plenty of hardware toys, and since I'm thinking of starting another project, I'd like to sell a couple of wireless cards which I didn't use very often to recoup some of the money to fund the project, so here it goes:

- Generic Prism3 802.11b USB1.1 wireless dongle. It works with prism2_usb driver from linux-wlan-ng project, and should also work with wi driver in OpenBSD (although I didn't have a chance to test it under OpenBSD) should you install OpenBSD on your C1K/C3K. It has a primary fw 1.1.4 and station firmware 1.8.3. Could be used on SL-6000 and C1K/C3K. Please note, that with C1K/C3K it will require a powered hub, since C1K/C3K can't provide sufficient power on usb bus. Also, note that you still need a cable to connect it to mini-A usb connector on the Zaurus.

- Pretec Prism2.5 CF type I card. I've upgraded firmware to primary 1.1.1 and station 1.7.4 to fix hardware encryption problem. Card works fine with hostapi driver, should also work with prism2_cs from limux-wlan-ng project and orinoco driver. Nothing much to say about this card, it's rather small and it works. Here's a thread about it in case you need more info: https://www.oesf.org/forums/index.php?showtopic=3572

- Pretec Bluetooth 1.1 CF type I card. That's the old  BT2000E model which is well-supported by BlueZ and Affix.

Each card is $20. Shipping within continental US is at flat rate $5 for USPS Priority. Outside of continental US - at actual rate at your expense. I don't think I have original boxes and packing materials, I'll try to locate windoze drivers (in case you need them), but no guarantee. It's for Zaurus, afterall.

Any questions? Please don't hesitate to ask.
-albertr
[div align=\"right\"][a href=\"index.php?act=findpost&pid=79174\"][{POST_SNAPBACK}][/a][/div]

I'm interested in the bluetooth card.

Ragnorok

  • Sr. Member
  • ****
  • Posts: 296
    • View Profile
    • http://
A Couple Of 802.11b Cards For Sale
« Reply #3 on: May 11, 2005, 09:16:28 pm »
- I do take the WiFi so I can scrap this flakey DLink...
| I shed a tear for the passing of Hiroshi; he served me well
| Zaurus zealot since Nov 2002, PDA user since Oct 1991
| Replaced Z with UMID BZ February 2010

albertr

  • Hero Member
  • *****
  • Posts: 535
    • View Profile
    • http://
A Couple Of 802.11b Cards For Sale
« Reply #4 on: May 11, 2005, 09:45:19 pm »
Both of the Pretec cards are sold pending receipt of the funds, sorry. Any takers for Prism3 USB dongle? I believe they don't manufacture them anymore, and this dongle is not an easy find.  If anyone interested, please PM me. I actually do have a couple of them, exactly the same model.
-albertr

albertr

  • Hero Member
  • *****
  • Posts: 535
    • View Profile
    • http://
A Couple Of 802.11b Cards For Sale
« Reply #5 on: May 12, 2005, 11:38:13 am »
kahm,

please check your PM and email.
-albertr

PrOtOn

  • Jr. Member
  • **
  • Posts: 85
    • View Profile
A Couple Of 802.11b Cards For Sale
« Reply #6 on: May 12, 2005, 09:57:49 pm »
Well, if you still have some wireless card, then I would be interested.
 I haven't got my 5500 Zaurus, but I will need one once I get my Zaurus.
 
 Thanks.
Zaurus SL-5500
CF SanDisk 128MB(for flashing)
Symbol CF Wireless Card
512MB Kingston SD Card
OpenZaurus 3.5.3 Opie 1.2.0