What Headphone With Microphone For The Cxx00?

[GadgetGuy]

I am trying to experiement with VOIP. To do that, I need a headphone with microphone, which has a 3.5mm plug.

Could anyone tell me where to get one? Or do I have to use a 3.5 mm to 2.5 mm adapter first, and then a headphone / microphone combo?

Thanks for your advice.

Miklos

[bolbit]

I will be very interested if it exist.
i saw that the Z1000 had a microphone "inside", but not figured out how to use it.
hope someone had tested this!

[daniel3000]

I am trying to experiement with VOIP. To do that, I need a headphone with microphone, which has a 3.5mm plug.

Could anyone tell me where to get one? Or do I have to use a 3.5 mm to 2.5 mm adapter first, and then a headphone / microphone combo?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=98011\"][{POST_SNAPBACK}][/a][/div]

What I did: I took cheap stereo earphones, cut off one of the earphones (IIRC it was the left one, but I could be wrong) and mounted the microphone of a cheap mobile phone headset to the line of the cut off earphone.

This works VERY nicely and involves very little soldering (only on the mic).
The thing now looks exactly like a standard headset.
And it costs only about 5 Euro if you buy the parts cheaply on ebay.

daniel

[bolbit]

So, one of the channel (let'say the left one) is for microphone, the orther one for the speaker mono. that'it?.

About VoIp, did you use Kphone?

[GadgetGuy]

About VoIp, did you use Kphone?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=98113\"][{POST_SNAPBACK}][/a][/div]

Yes, that is what I am planning to use - but I need a headphone / mic set first...

I will try to find a 3.5mm to 2.5mm adapter, so that I can try if my cell phone headset works...

[daniel3000]

About VoIp, did you use Kphone?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=98113\"][{POST_SNAPBACK}][/a][/div]

Yes, that is what I am planning to use - but I need a headphone / mic set first...

I will try to find a 3.5mm to 2.5mm adapter, so that I can try if my cell phone headset works...
[div align=\"right\"][a href=\"index.php?act=findpost&pid=98128\"][{POST_SNAPBACK}][/a][/div]

I have used KPhone/PI a lot with the sipgate.de service and it works great with the above mentione self-made headset. As long as you don't touch the GUI while speaking, sound quality is excellent. As soon as you disturb the Zaurus by hitting keys or using the stylus, you will have interruptions.

Yes, such an adater with a standard headset may work as well. Just make sure the correct channel / mic connection.

daniel

[Da_Blitz]

the connector on the zaurus has 4 rings, gnd,mic,left,right (btw the mic is also used for the remote control) cant remeber the order specifcally but i do have a picture of how to make the remote which gives a pinout

ethier way any stero headset for a mobile phone should work as long as it has 4 sections on the plug and is 3.5mm, if you use a 2.5 to 3.5 you run the risk of buying one that only supports stereo and dosent support the mic (3 ring not 4) will post the pic soon

[griesie]

the connector on the zaurus has 4 rings, gnd,mic,left,right (btw the mic is also used for the remote control) cant remeber the order specifcally but i do have a picture of how to make the remote which gives a pinout

ethier way any stero headset for a mobile phone should work as long as it has 4 sections on the plug and is 3.5mm, if you use a 2.5 to 3.5 you run the risk of buying one that only supports stereo and dosent support the mic (3 ring not 4) will post the pic soon
[div align=\"right\"][a href=\"index.php?act=findpost&pid=98340\"][{POST_SNAPBACK}][/a][/div]

That is as far as I know not completely true (but I might be wrong). Yes, it has 4 rings, but the 4th ring is used only for the remote control. I personally use just a nomal 2.5 mm handsfree with 3 rings and a 3.5 mm to 2.5 mm adapter and it works great with my C1000 and kphone.

For those who are wondering how the switch between audio input and output is done: It's done via the different impedances of headphones and microphones.

regards

griesie

[daniel3000]

For those who are wondering how the switch between audio input and output is done: It's done via the different impedances of headphones and microphones.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=98355\"][{POST_SNAPBACK}][/a][/div]

Sorry, but that cannot be exactly correct.
I think the switch is done in software (dependent on the kind of software it either uses the channel as input or as output).

Reason: I can also use normal stereo earphones for KPhone/PI and use one of the earphones for listening and speak into the other one. Works well, too, but not optimal. So the decision if a mic or headphone is connected cannot be done via impedance measurement.

daniel

[griesie]

Hi,

if really works with a stereo headphone, then you're absolutely right (I never checked that). Anyway, the important thing is, that handsfrees with 3 rings do work ;-)


griesie

For those who are wondering how the switch between audio input and output is done: It's done via the different impedances of headphones and microphones.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=98355\"][{POST_SNAPBACK}][/a][/div]

Sorry, but that cannot be exactly correct.
I think the switch is done in software (dependent on the kind of software it either uses the channel as input or as output).

Reason: I can also use normal stereo earphones for KPhone/PI and use one of the earphones for listening and speak into the other one. Works well, too, but not optimal. So the decision if a mic or headphone is connected cannot be done via impedance measurement.

daniel
[div align=\"right\"][a href=\"index.php?act=findpost&pid=98356\"][{POST_SNAPBACK}][/a][/div]

[Da_Blitz]

I cant remeber if this is the exact values for the resistors (the one for the previos models uses diffrent resistors) but i thought i would post this for anyone who was intrested, it also explains how the headphone jack is wired

[daniel3000]

I cant remeber if this is the exact values for the resistors (the one for the previos models uses diffrent resistors) but i thought i would post this for anyone who was intrested, it also explains how the headphone jack is wired
[div align=\"right\"][a href=\"index.php?act=findpost&pid=98536\"][{POST_SNAPBACK}][/a][/div]

Thank you! So I may finally be able to build my own remote control.
Howeer, the picture is named ..RH1. IIRC threr is another remote control with the name RH2 for the SL-Cxx00 models. So is the schematic valid for the SL-C3000?

daniel

[bolbit]

hi all,
i have found a 2.5 to 3.5 adaptater. i can heard sound in my telephone head set now. i do not have software to try te microphone. I have tried kphone with no success, kphone keep asking for my password, for voipbuster and fwd. i have followed the instructions found on the site of these sip providers to set up kphone. it seems that it's not possible for it to be registred ?
if i tried to dial a fixed telephone number, most of the time it will ask to login and then stop dialing. but one or two times, the phone call was done (so the logging should worked), but after 1 s  the communication was established, kphone crashed.
i'm using a c1000, the sharp rom, and kphone v1.0.0.
did anybody succeed using kphone with a c1000?

[Da_Blitz]

i will see if i can dig one up for you, i remeber getting it off the same site that tells you how to upgrade the memorye on the c8xx zaurus's

[kahm]

I cant remeber if this is the exact values for the resistors (the one for the previos models uses diffrent resistors) but i thought i would post this for anyone who was intrested, it also explains how the headphone jack is wired
[div align=\"right\"][a href=\"index.php?act=findpost&pid=98536\"][{POST_SNAPBACK}][/a][/div]

Thank you! So I may finally be able to build my own remote control.
Howeer, the picture is named ..RH1. IIRC threr is another remote control with the name RH2 for the SL-Cxx00 models. So is the schematic valid for the SL-C3000?

daniel
[div align=\"right\"][a href=\"index.php?act=findpost&pid=98543\"][{POST_SNAPBACK}][/a][/div]

No, it isn't. The RH2 has updated resistance values - the RH1 does not work on the 3xxx Zaurii.