Author Topic: Pdaxrom For C3000 Beta2 (Read 119173 times)

flavien · « **Reply #15 on:** January 11, 2006, 01:57:17 pm »

6, 8 (reboot) , 1, 7, 8 (reboot)

It's working ...

X start ... enjoy

Thanks you ThC

pyknite · « **Reply #16 on:** January 11, 2006, 01:58:37 pm »

Quote

Quote
je comprend pas... je viens de tÃ©lÃ©charger la derniÃ¨re archive, et j'ai tjs pas de hd-utils
[div align=\"right\"][a href=\"index.php?act=findpost&pid=110499\"][{POST_SNAPBACK}][/a][/div]
stop to speak french please, community doesn't like that and i understand why !

Excuse me for my poor english i'm french
[div align=\"right\"][a href=\"index.php?act=findpost&pid=110507\"][{POST_SNAPBACK}][/a][/div]

sry... my english is very poor i will try to make an effort

pyknite · « **Reply #17 on:** January 11, 2006, 02:06:09 pm »

ok... it was my fault... i haved copied all the files in my hdd3 aulieu of the sd card

i'm a boulet ...

chrisluu · « **Reply #18 on:** January 11, 2006, 02:44:40 pm »

So far it works pretty well. The only issue I'm having is that when I turn off/suspend the Zaurus, the hard drive light stays lit. Is this normal behavior? Can we stop it from lighting? I don't think that the hard drive is actually active.

flavien · « **Reply #19 on:** January 11, 2006, 03:47:53 pm »

Quote

So far it works pretty well. The only issue I'm having is that when I turn off/suspend the Zaurus, the hard drive light stays lit. Is this normal behavior? Can we stop it from lighting? I don't think that the hard drive is actually active.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=110520\"][{POST_SNAPBACK}][/a][/div]

same for me

Code: [Select]

#apmsleep +1:00Click on the On button, Then Ctrl + Z

Code: [Select]

# psapmsleep is still in processus

sylpil · « **Reply #20 on:** January 11, 2006, 03:53:08 pm »

Hello,

[Moi aussi je suis franÃ§ais !]

Possible to install PdaXrom on SL-C3100 ? Thanks

flavien · « **Reply #21 on:** January 11, 2006, 03:55:24 pm »

Quote

Possible to install PdaXrom on SL-C3100 ? Thanks
[div align=\"right\"][a href=\"index.php?act=findpost&pid=110528\"][{POST_SNAPBACK}][/a][/div]

Yes but SL-C3100 is official support

flavien · « **Reply #22 on:** January 11, 2006, 03:56:22 pm »

Quote

So far it works pretty well. The only issue I'm having is that when I turn off/suspend the Zaurus, the hard drive light stays lit. Is this normal behavior? Can we stop it from lighting? I don't think that the hard drive is actually active.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=110520\"][{POST_SNAPBACK}][/a][/div]

Remove the SD card, and they are no problem ... hard drive stop light.

ThC · « **Reply #23 on:** January 11, 2006, 04:04:36 pm »

@sylpil : would you be interrested in a pivot_root install for c3100 ? if yes, why ?
(I should make one if enough people are interrested in this one)

Jondalar · « **Reply #24 on:** January 11, 2006, 04:23:01 pm »

Hi guys,

I was downloading it for 1,2 hours - so I thought I put it onto my server (if you are okay THc, PM me if you do not like this!)

File can be downloaded
HERE

Off now to play around with it :-) Thanks a lot THC!

J*

desertrat · « **Reply #25 on:** January 11, 2006, 04:36:04 pm »

Quote

@sylpil : would you be interrested in a pivot_root install for c3100 ? if yes, why ?
(I should make one if enough people are interrested in this one)

I'm interested. Presumably it would mean no more symlinking madness?

However it seems that the HDD has to be repartitioned into a single 4GB (correct me if I'm wrong as I have only been following this thread on and off). Is it not possible to retain a fat partition so that the Z can still be used as a usb-storage device for dumb windoze clients?

-- cheers

flavien · « **Reply #26 on:** January 11, 2006, 04:54:11 pm »

Quote

Is it not possible to retain a fat partition so that the Z can still be used as a usb-storage device for dumb windoze clients?[div align=\"right\"][a href=\"index.php?act=findpost&pid=110546\"][{POST_SNAPBACK}][/a][/div]

Yes no fat partition, Z cannot be used as a usb-storage.
Install Winscp on Windows and you can made FTP over SSH (with TCP/IP over USB).
I think every body here prefer to use TCP/IP over USB to take control of his Zaurus (SSH) than mount usb-storage like a USB-Key

pyknite · « **Reply #27 on:** January 11, 2006, 05:23:58 pm »

I have a problem of mapping with xfce... (with the last version i doesn t have these problems). my fn key didnt work...so i can have all the blue key (up of the normal key, les touche bleue au dessus des touche normales)... and to have the right click i must make fn more ctrl and click...

any idee?
thx

ps i have tried some other combination of key but i didnt found

sven · « **Reply #28 on:** January 11, 2006, 05:25:57 pm »

Just a short feedback...

I'm successfully installed this pdaxrom image on my C3000 (but extracted the hdimage.tgz myself, because i didn't read the workaround above). Thanks.

But another problem occured if i left a memory-card in the cf-slot, the init-script tried to mount this card as root. I think this is sometimes a very welcome behaviour, but should not be the default behavour?

Thanks again for made my C3000 usefull
Sven

Jondalar · « **Reply #29 on:** January 11, 2006, 05:32:50 pm »

Quote

Yes no fat partition, Z cannot be used as a usb-storage.
Install Winscp on Windows and you can made FTP over SSH (with TCP/IP over USB).
I think every body here prefer to use TCP/IP over USB to take control of his Zaurus (SSH) than mount usb-storage like a USB-Key
[div align=\"right\"][{POST_SNAPBACK}][/a][/div]

Hi Flavien,

this is something that can be overcome be using this [a href=\"http://www.fs-driver.org/]http://www.fs-driver.org/[/url] freeware driver under windows. I can access my internal ext3 partition aswell as my Z with this very fine.

But for the Linux install I would *NOT* recommend other but ext2 or ext3... The symlinking and the naming conventions of good old DOS are not appropriate for a Linux system in my eyes.

J*

News:

Author Topic: Pdaxrom For C3000 Beta2 (Read 119173 times)