Author Topic: Sending Files Via Bluetooth  (Read 5559 times)

gab74

  • Sr. Member
  • ****
  • Posts: 344
    • View Profile
Sending Files Via Bluetooth
« on: January 26, 2006, 10:40:19 am »
I'm using Cako 1.23 on My C3100... how can i send files via bluetooth to other devices ?
Gabriele
NOW : C3100 (code name Laudicus)- SOCKETCOMM CF MODEM 56K - CF GPS GLOBASAT BC-307 - BLUETOOTH CF BELKIN - ETHERNET CF TRENDNET TE-CF100
BEFORE: SL6000L (code name Anselmus) - 512MB SD - 256MB CF - SOCKETCOMM CF MODEM 56K - CF GPS GLOBASAT BC-307

bam

  • Hero Member
  • *****
  • Posts: 1213
    • View Profile
    • http://thegrinder.ws
Sending Files Via Bluetooth
« Reply #1 on: January 27, 2006, 03:29:23 am »
good question, I am using a kubuntu laptop and my z they see each other and I load the opush but connection refused is what I get
SL-C3100 current: Stock/Tetsu 18h
Socket BT CF Card
Linksys WCF-12 802.11b/Cheapie USB Ethernet

The Grinder

gab74

  • Sr. Member
  • ****
  • Posts: 344
    • View Profile
Sending Files Via Bluetooth
« Reply #2 on: January 31, 2006, 11:50:40 am »
on Cako 1.23 there is obextool for sending file and opd to receive....
For me all works well !!!
Gabriele
NOW : C3100 (code name Laudicus)- SOCKETCOMM CF MODEM 56K - CF GPS GLOBASAT BC-307 - BLUETOOTH CF BELKIN - ETHERNET CF TRENDNET TE-CF100
BEFORE: SL6000L (code name Anselmus) - 512MB SD - 256MB CF - SOCKETCOMM CF MODEM 56K - CF GPS GLOBASAT BC-307

bam

  • Hero Member
  • *****
  • Posts: 1213
    • View Profile
    • http://thegrinder.ws
Sending Files Via Bluetooth
« Reply #3 on: January 31, 2006, 08:09:55 pm »
actually all I did was plug in the card(with cacko) then use my laptop to send files via obpush(KDE), as for send, havent diddled with that yet. What i do need to find out is how to get my bt network running so i can sync my *.ics file for korganizer/kopi
SL-C3100 current: Stock/Tetsu 18h
Socket BT CF Card
Linksys WCF-12 802.11b/Cheapie USB Ethernet

The Grinder

tombraider

  • Sr. Member
  • ****
  • Posts: 409
    • View Profile
    • http://atoah.com/zaurus/
Sending Files Via Bluetooth
« Reply #4 on: February 23, 2006, 10:52:43 am »
Dumb question...where is the "obextool" on Cacko?  I can send files from my PC TO the Zaurus but can't figure out how to SEND a file from the Zaurus to the PC.  I don't see any Obex software anywhere.
?????

Quote
on Cako 1.23 there is obextool for sending file and opd to receive....
For me all works well !!!
[div align=\"right\"][a href=\"index.php?act=findpost&pid=113130\"][{POST_SNAPBACK}][/a][/div]
Learning Chinese?  Have a Mac?  Try Hanzi Master: Download for free

Tombraider's Zaurus C1000 Tips Web Site

SL-3200 from Conics.net: Sharp ROM| SL-C1000: Pdaxrom Beta 3

Meanie

  • Hero Member
  • *****
  • Posts: 2803
    • View Profile
    • http://www.users.on.net/~hluc/myZaurus/
Sending Files Via Bluetooth
« Reply #5 on: February 23, 2006, 12:22:37 pm »
Quote
Dumb question...where is the "obextool" on Cacko?  I can send files from my PC TO the Zaurus but can't figure out how to SEND a file from the Zaurus to the PC.  I don't see any Obex software anywhere.
?????

Quote
on Cako 1.23 there is obextool for sending file and opd to receive....
For me all works well !!!
[div align=\"right\"][a href=\"index.php?act=findpost&pid=113130\"][{POST_SNAPBACK}][/a][/div]
[div align=\"right\"][a href=\"index.php?act=findpost&pid=115874\"][{POST_SNAPBACK}][/a][/div]

obextool is a command line tool. unfortunately, there aren't many gui tools out there yet. i found one called Tech-EDV which is a GUI obextool, actually, its a GUI implementing obexftp and is also called ObexTool to confuse the matter  This tool uses X so might be more useful for pdaXrom than Sharp/Cacko.

there are also a few nifty java/midp tools out there for obex file browsing and transfer but the limited java support on the Zaurus is a pain  i might try to backport some of them if i have time, but then it might not be worth the effort so i have instead written a qshdlg script to do something simple. for those who don't know, qshdlg is similar to opie-sh but more advanced.

i have build a bluetooth package which has the bluez stack and obex as well as the script for for a bluetooth gui. it has borrowed many files from cacko and is intended to provide bluetooth support for the stock Sharp ROM on the C3x00/C1000.
SL-C3000 - pdaXii13 build5.4.9 (based on pdaXrom beta3) / SL-C3100 - Sharp ROM 1.02 JP (heavily customised)
Netgear MA701 CF, SanDisk ConnectPlus CF, Socket Bluetooth CF, 4GB Kingston CF,  4GB pqi SD, 4GB ChoiceOnly SD, 2GB SanDisk SD USB Plus, 1GB SanDisk USB Plus, 1GB Transcend SD, 2GB SanDisk MicroSD with SD adaptor, Piel Frama Leather Case, GoldX 5-in-1 USB cable, USB hub, USB mouse, USB keyboard, USB ethernet, USB HDD, many other USB accessories...
(Zaurus SL-C3000 owner since March 14. 2005, Zaurus SL-C3100 owner since September 21. 2005)
http://members.iinet.net.au/~wyso/myZaurus - zBook3K

gab74

  • Sr. Member
  • ****
  • Posts: 344
    • View Profile
Sending Files Via Bluetooth
« Reply #6 on: February 27, 2006, 02:20:50 pm »
Any news about the bluetooth GUI ??? is it possible download ???
Gabriele
NOW : C3100 (code name Laudicus)- SOCKETCOMM CF MODEM 56K - CF GPS GLOBASAT BC-307 - BLUETOOTH CF BELKIN - ETHERNET CF TRENDNET TE-CF100
BEFORE: SL6000L (code name Anselmus) - 512MB SD - 256MB CF - SOCKETCOMM CF MODEM 56K - CF GPS GLOBASAT BC-307

Meanie

  • Hero Member
  • *****
  • Posts: 2803
    • View Profile
    • http://www.users.on.net/~hluc/myZaurus/
Sending Files Via Bluetooth
« Reply #7 on: March 01, 2006, 12:55:34 am »
Quote
Any news about the bluetooth GUI ??? is it possible download ???
[div align=\"right\"][{POST_SNAPBACK}][/a][/div]

here's the stripped version for cacko. it only contains the scripts and supporting icons. you will need to install qshdlg [a href=\"http://zaurus.daemons.gr/menaie/build/qshdlg_0.6.2-1_arm.ipk]http://zaurus.daemons.gr/menaie/build/qshdlg_0.6.2-1_arm.ipk[/url] too.
SL-C3000 - pdaXii13 build5.4.9 (based on pdaXrom beta3) / SL-C3100 - Sharp ROM 1.02 JP (heavily customised)
Netgear MA701 CF, SanDisk ConnectPlus CF, Socket Bluetooth CF, 4GB Kingston CF,  4GB pqi SD, 4GB ChoiceOnly SD, 2GB SanDisk SD USB Plus, 1GB SanDisk USB Plus, 1GB Transcend SD, 2GB SanDisk MicroSD with SD adaptor, Piel Frama Leather Case, GoldX 5-in-1 USB cable, USB hub, USB mouse, USB keyboard, USB ethernet, USB HDD, many other USB accessories...
(Zaurus SL-C3000 owner since March 14. 2005, Zaurus SL-C3100 owner since September 21. 2005)
http://members.iinet.net.au/~wyso/myZaurus - zBook3K

gab74

  • Sr. Member
  • ****
  • Posts: 344
    • View Profile
Sending Files Via Bluetooth
« Reply #8 on: March 07, 2006, 02:46:41 pm »
Quote
Quote
Any news about the bluetooth GUI ??? is it possible download ???
[div align=\"right\"][{POST_SNAPBACK}][/a][/div]

here's the stripped version for cacko. it only contains the scripts and supporting icons. you will need to install qshdlg [a href=\"http://zaurus.daemons.gr/menaie/build/qshdlg_0.6.2-1_arm.ipk]http://zaurus.daemons.gr/menaie/build/qshdlg_0.6.2-1_arm.ipk[/url] too.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=116475\"][{POST_SNAPBACK}][/a][/div]

I try your GUI on my C3100 running cacko 1.23
All works well except the sending files with obex push...
the gui say " file sending success" but no file is received...
if i use the command line all works well, so i think there is some problem in the GUI......
Gabriele
NOW : C3100 (code name Laudicus)- SOCKETCOMM CF MODEM 56K - CF GPS GLOBASAT BC-307 - BLUETOOTH CF BELKIN - ETHERNET CF TRENDNET TE-CF100
BEFORE: SL6000L (code name Anselmus) - 512MB SD - 256MB CF - SOCKETCOMM CF MODEM 56K - CF GPS GLOBASAT BC-307

bluedevils

  • Hero Member
  • *****
  • Posts: 1284
    • View Profile
    • http://
Sending Files Via Bluetooth
« Reply #9 on: March 07, 2006, 04:59:07 pm »
I just sent a vcard via obextool push (my phone doesn't support ftp) to my phone

Code: [Select]
obextool -i hci0 push addressbook.vcf
I got the bt address and channel from sdptool browse.  This shows the target's (phone) bluetooth infromation.  hci0 is the interface of the zaurus's (at least for me) bluetooth card.
I'm now an iphone user and use my zaurii as serial terminals, perl and shell scripting and when I need 640x480 screens

sl-c3100/pda cacko 1.23 | sl-6000l/needs battery | sl-c760/server pdaxrom rc12 | Former sl-5500/tkcrom owner (sister's birthday gift)

gab74

  • Sr. Member
  • ****
  • Posts: 344
    • View Profile
Sending Files Via Bluetooth
« Reply #10 on: March 08, 2006, 03:17:44 pm »
Quote
I just sent a vcard via obextool push (my phone doesn't support ftp) to my phone

Code: [Select]
obextool -i hci0 push addressbook.vcf
I got the bt address and channel from sdptool browse.  This shows the target's (phone) bluetooth infromation.  hci0 is the interface of the zaurus's (at least for me) bluetooth card.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=117464\"][{POST_SNAPBACK}][/a][/div]

infact from command line it works....
from the GUI no !
Gabriele
NOW : C3100 (code name Laudicus)- SOCKETCOMM CF MODEM 56K - CF GPS GLOBASAT BC-307 - BLUETOOTH CF BELKIN - ETHERNET CF TRENDNET TE-CF100
BEFORE: SL6000L (code name Anselmus) - 512MB SD - 256MB CF - SOCKETCOMM CF MODEM 56K - CF GPS GLOBASAT BC-307

Meanie

  • Hero Member
  • *****
  • Posts: 2803
    • View Profile
    • http://www.users.on.net/~hluc/myZaurus/
Sending Files Via Bluetooth
« Reply #11 on: March 08, 2006, 09:39:39 pm »
yeah, I was lazy and hardcoded my mobile phone's obex push channel instead of dynamically determing the channel number using sdptool. I will fix it eventually when I have some time. Too busy with pdaXrom atm...
SL-C3000 - pdaXii13 build5.4.9 (based on pdaXrom beta3) / SL-C3100 - Sharp ROM 1.02 JP (heavily customised)
Netgear MA701 CF, SanDisk ConnectPlus CF, Socket Bluetooth CF, 4GB Kingston CF,  4GB pqi SD, 4GB ChoiceOnly SD, 2GB SanDisk SD USB Plus, 1GB SanDisk USB Plus, 1GB Transcend SD, 2GB SanDisk MicroSD with SD adaptor, Piel Frama Leather Case, GoldX 5-in-1 USB cable, USB hub, USB mouse, USB keyboard, USB ethernet, USB HDD, many other USB accessories...
(Zaurus SL-C3000 owner since March 14. 2005, Zaurus SL-C3100 owner since September 21. 2005)
http://members.iinet.net.au/~wyso/myZaurus - zBook3K

Jon_J

  • Hero Member
  • *****
  • Posts: 1853
    • View Profile
    • http://
Sending Files Via Bluetooth
« Reply #12 on: May 11, 2006, 02:52:16 pm »
Quote
yeah, I was lazy and hardcoded my mobile phone's obex push channel instead of dynamically determing the channel number using sdptool. I will fix it eventually when I have some time. Too busy with pdaXrom atm...
[div align=\"right\"][a href=\"index.php?act=findpost&pid=117670\"][{POST_SNAPBACK}][/a][/div]
Any updates on this yet?
I haven't had much luck with my 2 BT Kensington dongles..
C3100 Multiboot-->Angstrom 2007.12-r18 | Cacko 1.23 | ArchLinuxARM
C3200 pdaxii13v2-5.5-alpha4 Akita on NAND

Ambicom WL1100C-CF Wifi - Ambicom CF modem - Ambicom CF GPS - Belkin-F5D5050 USB LAN
Socket CF Bluetooth rev K - Iogear 4 port USB micro hub - pocket CF card reader
Targus mini USB optical mouse - 2 Targus SD card readers

Jon_J

  • Hero Member
  • *****
  • Posts: 1853
    • View Profile
    • http://
Sending Files Via Bluetooth
« Reply #13 on: May 27, 2006, 07:11:40 am »
Any updates on this?
I just got a Socket CF Bluetooth card.
When using OBEX Push, I just get an empty list?
How can I browse files and send them with this?
I cannot type into the window either.
« Last Edit: May 27, 2006, 08:18:17 am by Jon_J »
C3100 Multiboot-->Angstrom 2007.12-r18 | Cacko 1.23 | ArchLinuxARM
C3200 pdaxii13v2-5.5-alpha4 Akita on NAND

Ambicom WL1100C-CF Wifi - Ambicom CF modem - Ambicom CF GPS - Belkin-F5D5050 USB LAN
Socket CF Bluetooth rev K - Iogear 4 port USB micro hub - pocket CF card reader
Targus mini USB optical mouse - 2 Targus SD card readers

Jon_J

  • Hero Member
  • *****
  • Posts: 1853
    • View Profile
    • http://
Sending Files Via Bluetooth
« Reply #14 on: May 27, 2006, 08:18:46 am »
I changed these 3 applications to "Run as root",
but that didn't resolve the issue with OBEX push not finding any files.
Is there a particular directory, that the files should be located in, for OBEX push to "find" them?
C3100 Multiboot-->Angstrom 2007.12-r18 | Cacko 1.23 | ArchLinuxARM
C3200 pdaxii13v2-5.5-alpha4 Akita on NAND

Ambicom WL1100C-CF Wifi - Ambicom CF modem - Ambicom CF GPS - Belkin-F5D5050 USB LAN
Socket CF Bluetooth rev K - Iogear 4 port USB micro hub - pocket CF card reader
Targus mini USB optical mouse - 2 Targus SD card readers