← previous next →
Pages: [1]

Author Topic: Senao Nl-2511cf Mercury + Cacko 1.23 On 3100  (Read 3442 times)

loothi

  • Newbie
  • *
  • Posts: 8
    • View Profile
    • http://www.triffid.org/
Senao Nl-2511cf Mercury + Cacko 1.23 On 3100
« on: February 13, 2006, 04:21:18 am »
Hello. Using a new (to me) 3100.

Just flashed to Cacko 1.23.

I am using the NL-2511CF MERCURY wireless card, which is recognised by "system Info" -> CF Slot as a "Zonet ZCF1100" - although is marked by an exclamation mark.

If I open "wireless monitor" it complains "Can't find a wireless device", and ifconfig shows no wlan0.

Any ideas how to configure this?

One small other thing.

I inherited this Z with an OpenBSD partition which I ditched and fdisk'd the bsd partition to fat32, and mk2fs.vfat on it.

I have ext3 /dev/hda1 and /dev/hda2 and a fat32 /dev/hda3 (which i think is "normal") but on cacko boot, it complains "HDD is not initialized!" I can see from the script I need some default files. How do I set this up by hand?

thanks in advance
~loothi
Logged

sidmoraes

  • Full Member
  • ***
  • Posts: 116
    • View Profile
    • http://
Senao Nl-2511cf Mercury + Cacko 1.23 On 3100
« Reply #1 on: February 13, 2006, 08:02:54 am »
Quote
Hello. Using a new (to me) 3100.

Just flashed to Cacko 1.23.

I am using the NL-2511CF MERCURY wireless card, which is recognised by "system Info" -> CF Slot as a "Zonet ZCF1100" - although is marked by an exclamation mark.

If I open "wireless monitor" it complains "Can't find a wireless device", and ifconfig shows no wlan0.

Any ideas how to configure this?

One small other thing.

I inherited this Z with an OpenBSD partition which I ditched and fdisk'd the bsd partition to fat32, and mk2fs.vfat on it.

I have ext3 /dev/hda1 and /dev/hda2 and a fat32 /dev/hda3 (which i think is "normal") but on cacko boot, it complains "HDD is not initialized!" I can see from the script I need some default files. How do I set this up by hand?

thanks in advance
~loothi
[div align=\"right\"][a href=\"index.php?act=findpost&pid=114617\"][{POST_SNAPBACK}][/a][/div]

Please,

What did you get with:
cardctl info
cardctl status
lsmod
?
Logged
SL-C1000 ( Cacko-Rom 1.23 ) + SL-C3100 ( Cacko-Rom 1.23 )
2Gb SD, usb host cable made by myself, CF modem Xircom,
CF wifi Zonet, Hawking CF 10/100 ethernet,
 USB net, USB CD-Writer Sony CRX10U, CF to PCMCIA adapter,
PCMCIA 2G disk Toshiba, USB charger self-made,
USB BLuetooth,
RH2 ( Wired control for Z ) made by myself,
Serial cable, also made ...

loothi

  • Newbie
  • *
  • Posts: 8
    • View Profile
    • http://www.triffid.org/
Senao Nl-2511cf Mercury + Cacko 1.23 On 3100
« Reply #2 on: February 13, 2006, 09:14:52 am »
Hi.

cardctl info

PRODID_1="WLAN"
PRODID_2="11Mbps_PC-Card_3.0"
PRODID_3="ISL37100P"
PRODID_4="Eval-RevA"
MANFID=000b,7100
FUNCID=6
PRODID_1="HITACHI"
PRODID_2="microdrive"
PRODID_3=""
PRODID_4=""
MANFID=0319,0000
FUNCID=4

cardctl status

Socket 0:
  3.3V 16-bit PC Card
  function 0: [ready]
Socket 1:
  3.3V 16-bit PC Card
  function 0: [ready], [bat dead], [bat low]

lsmod

Module                  Size  Used by
sharp_mmcsd_m          41008   2
pxa_bi                 24848   0  (unused)
net_fd                 25248   0  (unused)
usbdcore               35504   0  [pxa_bi net_fd]
usbdmonitor             5488   0
usb-monitor             6496   0
bvdd                   11136   0  (unused)


thanks
~loothi
Logged

sidmoraes

  • Full Member
  • ***
  • Posts: 116
    • View Profile
    • http://
Senao Nl-2511cf Mercury + Cacko 1.23 On 3100
« Reply #3 on: February 13, 2006, 12:04:14 pm »
Quote
Hi.

cardctl info

PRODID_1="WLAN"
PRODID_2="11Mbps_PC-Card_3.0"
PRODID_3="ISL37100P"
PRODID_4="Eval-RevA"
MANFID=000b,7100
FUNCID=6
PRODID_1="HITACHI"
PRODID_2="microdrive"
PRODID_3=""
PRODID_4=""
MANFID=0319,0000
FUNCID=4

cardctl status

Socket 0:
  3.3V 16-bit PC Card
  function 0: [ready]
Socket 1:
  3.3V 16-bit PC Card
  function 0: [ready], [bat dead], [bat low]

lsmod

Module                  Size  Used by
sharp_mmcsd_m          41008   2
pxa_bi                 24848   0  (unused)
net_fd                 25248   0  (unused)
usbdcore               35504   0  [pxa_bi net_fd]
usbdmonitor             5488   0
usb-monitor             6496   0
bvdd                   11136   0  (unused)


thanks
~loothi
[div align=\"right\"][a href=\"index.php?act=findpost&pid=114642\"][{POST_SNAPBACK}][/a][/div]

Your Z don't load the modules for your card.

Some more information:
ls -ls /lib/modules/2.4.20/kernel/drivers/net/wireless
and
cat /etc/pcmcia/hostap_cs.conf | grep 0007

You can try "modprobe hostap_cs" and verify with sysinfo.

Give to us your feedback.
Logged
SL-C1000 ( Cacko-Rom 1.23 ) + SL-C3100 ( Cacko-Rom 1.23 )
2Gb SD, usb host cable made by myself, CF modem Xircom,
CF wifi Zonet, Hawking CF 10/100 ethernet,
 USB net, USB CD-Writer Sony CRX10U, CF to PCMCIA adapter,
PCMCIA 2G disk Toshiba, USB charger self-made,
USB BLuetooth,
RH2 ( Wired control for Z ) made by myself,
Serial cable, also made ...

loothi

  • Newbie
  • *
  • Posts: 8
    • View Profile
    • http://www.triffid.org/
Senao Nl-2511cf Mercury + Cacko 1.23 On 3100
« Reply #4 on: February 15, 2006, 09:17:56 am »
Hello Again.

Dates are all wrong on this output as I get bored resetting the date on reboot.

> Your Z don't load the modules for your card.

>Some more information:
>ls -ls /lib/modules/2.4.20/kernel/drivers/net/wireless


lrwxrwxrwx    1 root     root           60 Dec 31 19:04 hermes.o -> /lib/modules.rom/2.4.20/kernel/drivers/net/wireless/hermes.o
lrwxrwxrwx    1 root     root           60 Dec 31 19:04 hostap.o -> /lib/modules.rom/2.4.20/kernel/drivers/net/wireless/hostap.o
lrwxrwxrwx    1 root     root           71 Dec 31 19:04 hostap_crypt_ccmp.o -> /lib/modules.rom/2.4.20/kernel/drivers/net/wireless/hostap_crypt_ccmp.o
lrwxrwxrwx    1 root     root           71 Dec 31 19:04 hostap_crypt_tkip.o -> /lib/modules.rom/2.4.20/kernel/drivers/net/wireless/hostap_crypt_tkip.o
lrwxrwxrwx    1 root     root           70 Dec 31 19:04 hostap_crypt_wep.o -> /lib/modules.rom/2.4.20/kernel/drivers/net/wireless/hostap_crypt_wep.o
lrwxrwxrwx    1 root     root           63 Dec 31 19:04 hostap_cs.o -> /lib/modules.rom/2.4.20/kernel/drivers/net/wireless/hostap_cs.o
lrwxrwxrwx    1 root     root           61 Dec 31 19:04 orinoco.o -> /lib/modules.rom/2.4.20/kernel/drivers/net/wireless/orinoco.o
lrwxrwxrwx    1 root     root           64 Dec 31 19:04 orinoco_cs.o -> /lib/modules.rom/2.4.20/kernel/drivers/net/wireless/orinoco_cs.o
lrwxrwxrwx    1 root     root           65 Dec 31 19:04 orinoco_usb.o -> /lib/modules.rom/2.4.20/kernel/drivers/net/wireless/orinoco_usb.o
lrwxrwxrwx    1 root     root           63 Dec 31 19:04 prism_usb.o -> /lib/modules.rom/2.4.20/kernel/drivers/net/wireless/prism_usb.o
lrwxrwxrwx    1 root     root           65 Dec 31 19:04 spectrum_cs.o -> /lib/modules.rom/2.4.20/kernel/drivers/net/wireless/spectrum_cs.o

>and
>cat /etc/pcmcia/hostap_cs.conf | grep 0007

Nothing come out of that command...

>You can try "modprobe hostap_cs" and verify with sysinfo.

It says "Can't locate module hostap_cs"

When I boot... I can see cardmgr looking to try and load hostap but not finding it, but the

/lib/modules.rom/2.4.20/kernel/drivers/net/wireless/hostap.o

is there when I look.

What should I try now?

thanks
~loothi
Logged

Hrw

  • Hero Member
  • *****
  • Posts: 1366
    • View Profile
Senao Nl-2511cf Mercury + Cacko 1.23 On 3100
« Reply #5 on: February 15, 2006, 09:35:10 am »
Code: [Select]
card "Senao NL-2011CD PLUS Ext2 Mercury"
   version "WLAN", "11Mbps_PC-Card_3.0", "ISL37100P", "Eval-RevA"
   manfid 0x000b, 0x7100
   bind "hostap_cs"
add it to hostap_cs.conf
Logged
OpenZaurus 3.5.4x Release Manager
OpenEmbedded, Ångström, Poky developer
My website

Misc embedded hardware.
Pages: [1]
← previous next →