Author Topic: Cacko Rom 1.23 For Sl-c3200 (Read 18987 times)

maslovsky · « **on:** May 09, 2006, 04:26:40 am »

Hi Everyone!

I got myself a 3200 device for a few days/weeks to build a version of ROM, which officially supports SL-C3200. You can download current build here:

http://cacko.oesf.org/downloads/c3200/SL-C...-2125070506.zip
http://cacko.oesf.org/downloads/c3200/SL-C...-2125070506.md5

http://cacko.oesf.org/downloads/c3200/SL-C...-1654160506.zip
http://cacko.oesf.org/downloads/c3200/SL-C...-1654160506.md5

The main difference from the "unofficial hack" is that 3200 kernel is built on Sharp's official sources, which have some minor changes in NAND flash handling code. Also your model version should now be reported properly in Sysinfo

Let me know how it installs and runs. PLease, report problems in this thread. Note that this is exactly the same 1.23 version as was released for older devices before with everything you love and hate. A work on hotfix or probably new version will start after I release a version for SL-C3000 (yes, I got myself a C3000 too, for hardware experiments

Regards,
Anton

Cresho · « **Reply #1 on:** May 09, 2006, 04:47:02 am »

ohh goody! testing it now. 2 nights ago, i did pdaxrom.

maslovsky · « **Reply #2 on:** May 09, 2006, 05:08:54 am »

Forgot to mention - the SD driver in this ROM is also old (doesn't support large SD cards). Feel free to install updated driver package, which is floating somewhere around. I will update the driver in the next build/release.

Cresho · « **Reply #3 on:** May 09, 2006, 05:41:16 am »

Roger that!

here are just a few problem.
1. sysinfo displays total memory=63791kb, temporary=10240kb, and i see no internal memory information so this one is missing the sysinfo does not display my internal drive. i did a df in the konsole and and displays my home(mtdblock3 as 91135 with 27700 used). Nice amount of onboard memory for programs....thanks anton.
2. overclocking the z locks me up randomly, causes screen flicker, whitens and blanks out the screen. NOT recommended.
3. I dont understand mirror in settings. Doesnt do anything for me.

Major problems:
cacko-lite 1.23 does not install. says error not compatible with sl-3200 or something.

good note,
1. bluetooth is awesome in this thing.
2. video playback is awsome.
3. search through the default phonebook is alphabatized which is a plus over the jap conversion. the sharprom, you cannot scan through files or addressbook alphabatized.
4. wireless monitor is good addition.
5.

ill post more as i go along. so far its stable. I havent tried uninstalling yet.

I have a question.
1. where did my other 60mb internal flash go to? it's reffering to to problem number 1
2. The internal memory of the sharprom has a temp, what is the difference between the cacko temp and the sharprom temp. which one eats up more and would i burn out the lifespan of the internal cacko temp over the sharprom?

ShiroiKuma · « **Reply #4 on:** May 09, 2006, 05:46:32 am »

Cresho,

can you try overclocking and see if you have the same problems I report in this thread.

I'm interested in seeing if this actually works.

ShiroiKuma

Cresho · « **Reply #5 on:** May 09, 2006, 06:07:34 am »

Quote

Cresho,

can you try overclocking and see if you have the same problems I report in this thread.

I'm interested in seeing if this actually works.

ShiroiKuma
[div align=\"right\"][a href=\"index.php?act=findpost&pid=126267\"][{POST_SNAPBACK}][/a][/div]

The over clocking and under clocking works. but it randomly locks me up.

yes i read your last post and was aware of it.

I will be porting over the few zaurus themes for the cacko. Ill start off with redoing the current one since i never liked it. then ill do noia and the oslinux one.

maslovsky · « **Reply #6 on:** May 09, 2006, 06:29:54 am »

Quote

1. sysinfo displays total memory=63791kb, temporary=10240kb, and i see no internal memory information so this one is missing

That's a known issue in sysinfo program (actually in Qtopia libraries, but that's not important) on 3100/3200 devices. It wil be fixed in Hotfix A, but not in this release.

Quote

2. overclocking the z locks me up randomly.

I noticed that too. I think the problem is that the new CPU revision (there IS a new new CPU revision on 3200, look at the CPU tab in Sysinfo) is less tolerant to overclocking or maybe needs larger voltage when overclocking.

maslovsky · « **Reply #7 on:** May 10, 2006, 05:51:51 am »

Quote

3. I dont understand mirror in settings. Doesnt do anything for me.

This an application for IO-Data CF VGA card, which mirrors Zaurus screen to the external VGA

Quote

2. The internal memory of the sharprom has a temp, what is the difference between the cacko temp and the sharprom temp. which one eats up more and would i burn out the lifespan of the internal cacko temp over the sharprom?

Don't know about Sharp temp, but Cacko's temp uses tmpfs filesystem, which doesn't use internal flash - it grows and shrinks in RAM as needed.

Cresho · « **Reply #8 on:** May 10, 2006, 06:25:02 am »

cacko 1.23 lite does not work. says it cannot install cacko rom on sl-c3200. This is the one i wanted to really try since it gives me 100mb free memory and i can install what i want..

now i understand the sys properties. Nice! very nice added bonus.

I am almost done with the 4 themes for the cacko.

porting over..

oslinux
gant
noia
one more which im debating. ill post pictures after.

mikew · « **Reply #9 on:** May 10, 2006, 06:41:53 am »

I have a C3200 & plan to use Cacko when Anton releases the final version.

Can I just backup hdd3 prior to upgrade & then restore it, I did not want to risk losing any of the Cacko seetings if they were stored on hdd3.

I assume that data on hdd3 wiill be lost when I upgrade?

Mike

Cresho · « **Reply #10 on:** May 11, 2006, 06:10:32 am »

running cacko 1.23 on the 3200 is fine. Just those items i mentioned before are problematic if i decide to overclock.

just read up ontop for my problem list #4

also posted pictures of zaurusthemes running under cacko 1.23.

They are very very big just because of the extra icons installed to accomodate any newly installed programs and tab configuration applied to icons. I really don't know what to do but i'll just leave them alone.

https://www.oesf.org/forums/index.php?showtopic=19315

maslovsky · « **Reply #11 on:** May 11, 2006, 02:10:14 pm »

Quote

I have a C3200 & plan to use Cacko when Anton releases the final version.

Can I just backup hdd3 prior to upgrade & then restore it, I did not want to risk losing any of the Cacko seetings if they were stored on hdd3.

I assume that data on hdd3 wiill be lost when I upgrade?

Mike
[div align=\"right\"][a href=\"index.php?act=findpost&pid=126391\"][{POST_SNAPBACK}][/a][/div]

No, internal hard drive is not touched with Cacko ROM install. You can just do an NAND restore if you want to go back to Sharp ROM.

maslovsky · « **Reply #12 on:** May 11, 2006, 02:30:09 pm »

Quote

cacko 1.23 lite does not work. says it cannot install cacko rom on sl-c3200. This is the one i wanted to really try since it gives me 100mb free memory and i can install what i want..

Thanks for reporting - I forgot to update the updater.sh in the Lite version. New Lite package has been uploaded:

http://cacko.oesf.org/downloads/c3200/SL-C...-2203110506.zip

Also, please, use update Kino2 package for the Lite verison from here:

http://cacko.oesf.org/downloads/kino2/kino2_0.4.3c-1_arm.ipk

I curently don't have access to the Cacko feed and cannot update kino2 package there...

Cresho · « **Reply #13 on:** May 11, 2006, 05:42:26 pm »

Enter new root partition size in MB (32 recommended, 121 maximum)

I thought it was 19. This might need updating.

i entered 19 anyway

SL-C3200-Qtopia-1.23-lite-2203110506.zip installed with a root partition size of 19 just fine.

one thing though and i know this is a known issue, when entering personalized info, it stops booting unless i press next. i was waiting for 5 minutes but i figured i just push next since lite does not have pim installed by default.

the task bar icon which holds which cards are installed has a small problem but i am not sure ifyou wanted it this way, you have access to the internal drive and you can unmount it and loose the internal drive. rebooting it puts it back in or mounting it again from terminal works fine "eject card 1 ata/ide fixed disk" the compact flash is known as eject card 0. the cacko full does not show this behavior

so far, i have not lost any information on my internal drive. reflashing cacko has not lost any info on internal drive. This is a plus for me since sharprom always whiped my drive out after a reflash.

this next one i am not sure if it is both cacko lite and complete but the cf card stays in slot and after a reboot, it dissapears. it is still mounted though.

mikew · « **Reply #14 on:** May 12, 2006, 10:44:07 am »

Just installed Cacko beta on my C3200 after Cresho saying hard disk data not lost. (Yes I did spend 3 1/2 hours backing up just in acse)

Everything went well with the install but have a few problems:-

StageOne does not appear to load properly, when I load from the console I get the following error message.

Qt/Embedded data dictionary is not owned by user 0, Aborted (It loaded without any problems using Cacko 1.23 on my C760 & on the stock ROM.

I have 3 USB drives, stock Sharp ROM recognised 2 of them Cacko 1.23 only recognised 1 of them.

Any help would be apreciated.

Also I thought disk access was a little slower than stock Sharp ROM.

Mike

News:

Author Topic: Cacko Rom 1.23 For Sl-c3200 (Read 18987 times)