Author Topic: Orinoco Drivers?  (Read 6884 times)

BarryW

  • Hero Member
  • *****
  • Posts: 690
    • View Profile
    • http://
Orinoco Drivers?
« on: July 04, 2006, 03:07:03 pm »
Has anybody seen drivers for the Lucent Orinoco wifi cards??  I happen to have a 3.3 volt silver card and wanted to use it with the Z.
What's this button do??

C3100
Distro changes almost weekly...

C3200
Distro also changes almost weekly...  :)

Hardware hacks and stuff.

sidmoraes

  • Full Member
  • ***
  • Posts: 116
    • View Profile
    • http://
Orinoco Drivers?
« Reply #1 on: July 04, 2006, 07:15:34 pm »
Quote
Has anybody seen drivers for the Lucent Orinoco wifi cards??  I happen to have a 3.3 volt silver card and wanted to use it with the Z.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=133917\"][{POST_SNAPBACK}][/a][/div]

I have a Pcmcia Orinoco card, and use it with a pcmcia to cf adapter. I don't need to install a module for this.
SL-C1000 ( Cacko-Rom 1.23 ) + SL-C3100 ( Cacko-Rom 1.23 )
2Gb SD, usb host cable made by myself, CF modem Xircom,
CF wifi Zonet, Hawking CF 10/100 ethernet,
 USB net, USB CD-Writer Sony CRX10U, CF to PCMCIA adapter,
PCMCIA 2G disk Toshiba, USB charger self-made,
USB BLuetooth,
RH2 ( Wired control for Z ) made by myself,
Serial cable, also made ...

BarryW

  • Hero Member
  • *****
  • Posts: 690
    • View Profile
    • http://
Orinoco Drivers?
« Reply #2 on: July 04, 2006, 07:55:07 pm »
Quote
Quote
Has anybody seen drivers for the Lucent Orinoco wifi cards??  I happen to have a 3.3 volt silver card and wanted to use it with the Z.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=133917\"][{POST_SNAPBACK}][/a][/div]

I have a Pcmcia Orinoco card, and use it with a pcmcia to cf adapter. I don't need to install a module for this.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=133945\"][{POST_SNAPBACK}][/a][/div]


Did you have to reconfigure anything for it??  I plug mine in and it says hey look a Lucent card!  The wireless applet doesn't see it though.
What's this button do??

C3100
Distro changes almost weekly...

C3200
Distro also changes almost weekly...  :)

Hardware hacks and stuff.

sidmoraes

  • Full Member
  • ***
  • Posts: 116
    • View Profile
    • http://
Orinoco Drivers?
« Reply #3 on: July 06, 2006, 04:03:01 pm »
Quote
Quote
Quote
Has anybody seen drivers for the Lucent Orinoco wifi cards??  I happen to have a 3.3 volt silver card and wanted to use it with the Z.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=133917\"][{POST_SNAPBACK}][/a][/div]

I have a Pcmcia Orinoco card, and use it with a pcmcia to cf adapter. I don't need to install a module for this.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=133945\"][{POST_SNAPBACK}][/a][/div]


Did you have to reconfigure anything for it??  I plug mine in and it says hey look a Lucent card!  The wireless applet doesn't see it though.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=133947\"][{POST_SNAPBACK}][/a][/div]

give me some infos, output of these commands:
lsmod
cardctl ident
SL-C1000 ( Cacko-Rom 1.23 ) + SL-C3100 ( Cacko-Rom 1.23 )
2Gb SD, usb host cable made by myself, CF modem Xircom,
CF wifi Zonet, Hawking CF 10/100 ethernet,
 USB net, USB CD-Writer Sony CRX10U, CF to PCMCIA adapter,
PCMCIA 2G disk Toshiba, USB charger self-made,
USB BLuetooth,
RH2 ( Wired control for Z ) made by myself,
Serial cable, also made ...

BarryW

  • Hero Member
  • *****
  • Posts: 690
    • View Profile
    • http://
Orinoco Drivers?
« Reply #4 on: July 07, 2006, 10:53:25 am »
Quote
Quote
Quote
Quote
Has anybody seen drivers for the Lucent Orinoco wifi cards??  I happen to have a 3.3 volt silver card and wanted to use it with the Z.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=133917\"][{POST_SNAPBACK}][/a][/div]

I have a Pcmcia Orinoco card, and use it with a pcmcia to cf adapter. I don't need to install a module for this.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=133945\"][{POST_SNAPBACK}][/a][/div]


Did you have to reconfigure anything for it??  I plug mine in and it says hey look a Lucent card!  The wireless applet doesn't see it though.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=133947\"][{POST_SNAPBACK}][/a][/div]

give me some infos, output of these commands:
lsmod
cardctl ident
[div align=\"right\"][a href=\"index.php?act=findpost&pid=134172\"][{POST_SNAPBACK}][/a][/div]


$ cardctl ident
Socket 0:
produce info: "Lucent Technologies", "WaveLAN/IEEE", "Version 01.01", ""
manfid: 0x0156, 0x0002
function" 6 (network)

lsmod

pxa_bi
net_fd
usbdcore
bluez
usbdmonitor
usb-monitor
sharp_mmcsd_m
bvdd
What's this button do??

C3100
Distro changes almost weekly...

C3200
Distro also changes almost weekly...  :)

Hardware hacks and stuff.

sidmoraes

  • Full Member
  • ***
  • Posts: 116
    • View Profile
    • http://
Orinoco Drivers?
« Reply #5 on: July 07, 2006, 08:39:34 pm »
Quote
Quote
Quote
Quote
Quote
Has anybody seen drivers for the Lucent Orinoco wifi cards??  I happen to have a 3.3 volt silver card and wanted to use it with the Z.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=133917\"][{POST_SNAPBACK}][/a][/div]

I have a Pcmcia Orinoco card, and use it with a pcmcia to cf adapter. I don't need to install a module for this.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=133945\"][{POST_SNAPBACK}][/a][/div]

Did you have to reconfigure anything for it??  I plug mine in and it says hey look a Lucent card!  The wireless applet doesn't see it though.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=133947\"][{POST_SNAPBACK}][/a][/div]

give me some infos, output of these commands:
lsmod
cardctl ident
[div align=\"right\"][a href=\"index.php?act=findpost&pid=134172\"][{POST_SNAPBACK}][/a][/div]


$ cardctl ident
Socket 0:
produce info: "Lucent Technologies", "WaveLAN/IEEE", "Version 01.01", ""
manfid: 0x0156, 0x0002
function" 6 (network)

lsmod

pxa_bi
net_fd
usbdcore
bluez
usbdmonitor
usb-monitor
sharp_mmcsd_m
bvdd
[div align=\"right\"][a href=\"index.php?act=findpost&pid=134238\"][{POST_SNAPBACK}][/a][/div]

Include these lines in "/etc/pcmcia/config", after this, reboot :

card "Lucent Technologies"
  manfid 0x0156, 0x0002
  bind "orinoco_cs"
SL-C1000 ( Cacko-Rom 1.23 ) + SL-C3100 ( Cacko-Rom 1.23 )
2Gb SD, usb host cable made by myself, CF modem Xircom,
CF wifi Zonet, Hawking CF 10/100 ethernet,
 USB net, USB CD-Writer Sony CRX10U, CF to PCMCIA adapter,
PCMCIA 2G disk Toshiba, USB charger self-made,
USB BLuetooth,
RH2 ( Wired control for Z ) made by myself,
Serial cable, also made ...

BarryW

  • Hero Member
  • *****
  • Posts: 690
    • View Profile
    • http://
Orinoco Drivers?
« Reply #6 on: July 07, 2006, 11:28:02 pm »
Quote
Quote
Quote
Quote
Quote
Quote
Has anybody seen drivers for the Lucent Orinoco wifi cards??  I happen to have a 3.3 volt silver card and wanted to use it with the Z.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=133917\"][{POST_SNAPBACK}][/a][/div]

I have a Pcmcia Orinoco card, and use it with a pcmcia to cf adapter. I don't need to install a module for this.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=133945\"][{POST_SNAPBACK}][/a][/div]

Did you have to reconfigure anything for it??  I plug mine in and it says hey look a Lucent card!  The wireless applet doesn't see it though.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=133947\"][{POST_SNAPBACK}][/a][/div]

give me some infos, output of these commands:
lsmod
cardctl ident
[div align=\"right\"][a href=\"index.php?act=findpost&pid=134172\"][{POST_SNAPBACK}][/a][/div]


$ cardctl ident
Socket 0:
produce info: "Lucent Technologies", "WaveLAN/IEEE", "Version 01.01", ""
manfid: 0x0156, 0x0002
function" 6 (network)

lsmod

pxa_bi
net_fd
usbdcore
bluez
usbdmonitor
usb-monitor
sharp_mmcsd_m
bvdd
[div align=\"right\"][a href=\"index.php?act=findpost&pid=134238\"][{POST_SNAPBACK}][/a][/div]

Include these lines in "/etc/pcmcia/config", after this, reboot :

card "Lucent Technologies"
  manfid 0x0156, 0x0002
  bind "orinoco_cs"
[div align=\"right\"][a href=\"index.php?act=findpost&pid=134282\"][{POST_SNAPBACK}][/a][/div]

Still nothing.  Are you using cacko light of full?
« Last Edit: July 07, 2006, 11:28:41 pm by BarryW »
What's this button do??

C3100
Distro changes almost weekly...

C3200
Distro also changes almost weekly...  :)

Hardware hacks and stuff.

sidmoraes

  • Full Member
  • ***
  • Posts: 116
    • View Profile
    • http://
Orinoco Drivers?
« Reply #7 on: July 08, 2006, 08:52:28 am »
Include these lines in your /etc/pcmcia/config :

card "Lucent Technologies"
  manfid 0x0156, 0x0002
  bind "orinoco_cs"
SL-C1000 ( Cacko-Rom 1.23 ) + SL-C3100 ( Cacko-Rom 1.23 )
2Gb SD, usb host cable made by myself, CF modem Xircom,
CF wifi Zonet, Hawking CF 10/100 ethernet,
 USB net, USB CD-Writer Sony CRX10U, CF to PCMCIA adapter,
PCMCIA 2G disk Toshiba, USB charger self-made,
USB BLuetooth,
RH2 ( Wired control for Z ) made by myself,
Serial cable, also made ...

BarryW

  • Hero Member
  • *****
  • Posts: 690
    • View Profile
    • http://
Orinoco Drivers?
« Reply #8 on: July 09, 2006, 09:11:30 pm »
Quote
Include these lines in your /etc/pcmcia/config :

card "Lucent Technologies"
  manfid 0x0156, 0x0002
  bind "orinoco_cs"
[div align=\"right\"][a href=\"index.php?act=findpost&pid=134315\"][{POST_SNAPBACK}][/a][/div]


I did, still doesn't work.
What's this button do??

C3100
Distro changes almost weekly...

C3200
Distro also changes almost weekly...  :)

Hardware hacks and stuff.

sidmoraes

  • Full Member
  • ***
  • Posts: 116
    • View Profile
    • http://
Orinoco Drivers?
« Reply #9 on: July 09, 2006, 10:03:27 pm »
I use cacko full.

What version did you use?
SL-C1000 ( Cacko-Rom 1.23 ) + SL-C3100 ( Cacko-Rom 1.23 )
2Gb SD, usb host cable made by myself, CF modem Xircom,
CF wifi Zonet, Hawking CF 10/100 ethernet,
 USB net, USB CD-Writer Sony CRX10U, CF to PCMCIA adapter,
PCMCIA 2G disk Toshiba, USB charger self-made,
USB BLuetooth,
RH2 ( Wired control for Z ) made by myself,
Serial cable, also made ...

BarryW

  • Hero Member
  • *****
  • Posts: 690
    • View Profile
    • http://
Orinoco Drivers?
« Reply #10 on: July 09, 2006, 11:46:35 pm »
Lite.

Okay, I just flashed Cacko full.  Still no joy.
« Last Edit: July 10, 2006, 02:45:01 am by BarryW »
What's this button do??

C3100
Distro changes almost weekly...

C3200
Distro also changes almost weekly...  :)

Hardware hacks and stuff.