Author Topic: Interesting Problem With Ambicom Wl1100c  (Read 13144 times)


  • Full Member
  • ***
  • Posts: 226
    • View Profile
Interesting Problem With Ambicom Wl1100c
« Reply #15 on: July 28, 2007, 06:44:09 pm »
As said, I am using the Sharp ROM with 2.4.20 kernel and it appears to use the prism_cs module.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=165474\"][{POST_SNAPBACK}][/a][/div]
Yeah, I suppose I was expecting the ROMs to be more similar.  It sounds like this isn't a problem for you, so I'm wondering why it's a problem for pdaXrom.  You might have a different version of the firmware, or my problem might be a combination of the ROM and the firmware.

It would be nice to know which firmware version is stable w/ pdaXrom so that I'd know which to flash.  I believe that 1.7.4 is required for WPA, so I suppose I'll start working my way down from 1.8.0 to 1.7.4.  Maybe I'll get lucky with one that works.
Device: SL-C3200 running pdaXii13v2 build 5.5.0
Networking: Symbol Spectrum24 WLAN card; Kingston CIO10T CF NIC
Storage: 4GB Transcend 150x SD; 16GB Transcend 133x CF; 4GB Seagate CF HDD; 4GB Patriot SD
HID: Logitech V450 Laser Mouse; generic silicone USB keyboard; 2 generic optical mice; stock plastic stylus
GPS: generic "UT-41" USB GPS Receiver
Case: neoprene case from my old Palm foldable keyboard


  • Newbie
  • *
  • Posts: 5
    • View Profile
Interesting Problem With Ambicom Wl1100c
« Reply #16 on: February 17, 2008, 01:44:22 pm »
I have been using an Ambicom since I got my Zaurus December 2007,and I've just started to see the issues as well.

Screen washes out to white, works again when card is removed.
Connection drop, zaurus responds very slow, works fine again when the card is removed
Not detected, remove and reinsert a couple of times, it works again.. then repeat from the top ...

Is this a bad quality card or something ?