Author Topic: 1.1.0r121 Is Out!  (Read 38713 times)

bcom75

  • Newbie
  • *
  • Posts: 43
    • View Profile
1.1.0r121 Is Out!
« Reply #15 on: September 21, 2006, 05:23:39 am »
Quote
Any C3000 owner had the balls to try installing this yet to see if its possible?

Anyone tried mplayer or can report on the state of the cxx00 video driver?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=141930\"][{POST_SNAPBACK}][/a][/div]

I'm on the same boat too...am willing to beta test the release on my C3000 if the developers have nothing against it...is there any serious risk to flashing C3000 with this new beta?

fiferboy

  • Newbie
  • *
  • Posts: 38
    • View Profile
1.1.0r121 Is Out!
« Reply #16 on: September 21, 2006, 07:09:15 am »
Quote
Tested on SL-C3200 works fine, no problems so far, the installation a bit tricky and i had to do it manualy. great to have on sl-c3200
[div align=\"right\"][a href=\"index.php?act=findpost&pid=141934\"][{POST_SNAPBACK}][/a][/div]

How did you go about installing it manually?  I can get to the point where I flash the new emergency system, but then on reboot there is no activity or charging light.

vilefridge

  • Newbie
  • *
  • Posts: 10
    • View Profile
1.1.0r121 Is Out!
« Reply #17 on: September 21, 2006, 06:28:00 pm »
excellent work!  I've noticed a few bugs (using C750):

- no cardctl for switching wifi schemes
- no audio!
- menu button does not work, have to use stylus
- some menu pixels are displayed "off screen"
- everything displayed on screen is "ghosted"

These all present in beta4 as well as r121, but were not present in beta2.  (never got around to trying beta3)
« Last Edit: September 21, 2006, 06:28:37 pm by vilefridge »

Lemuus

  • Newbie
  • *
  • Posts: 35
    • View Profile
1.1.0r121 Is Out!
« Reply #18 on: September 21, 2006, 09:39:05 pm »
On a SL-C3200
Very fast!!!!
but the usbfunction.py doesn't start, try to open /proc/deviceinfo/product, that doesn't exist, so i edited the file to override the machine autodetection.

actual problem.. i can't use my planex gw-cf11x, i tried the patches used in beta4 but no luck.
Daniel.

wrc4

  • Full Member
  • ***
  • Posts: 114
    • View Profile
1.1.0r121 Is Out!
« Reply #19 on: September 22, 2006, 01:37:34 am »
Great work Sashz!

I would have tried it right away if I still can use my 7500C. Right now I'm waiting for a solution or a new Flash chip.

I hope the APM works alright in this release.

I will try the new Cxx00 release later.
Zaurus SL-C1000 (Debian)
Zaurus SL-7500C
Nokia N810
KOHJINSHA SC3
ASUS EEEPC 701
ASUS WL-HDD 2.5
ASUS WL-500GPv2
WD MyBookWorldEdition (with a Segate 500G HD inside)

anunakin

  • Sr. Member
  • ****
  • Posts: 340
    • View Profile
    • http://vivaphp.net
1.1.0r121 Is Out!
« Reply #20 on: September 22, 2006, 07:22:52 am »
Quote
excellent work!  I've noticed a few bugs (using C750):

- no cardctl for switching wifi schemes
- no audio!
- menu button does not work, have to use stylus
- some menu pixels are displayed "off screen"
- everything displayed on screen is "ghosted"

These all present in beta4 as well as r121, but were not present in beta2.  (never got around to trying beta3)
[div align=\"right\"][a href=\"index.php?act=findpost&pid=142019\"][{POST_SNAPBACK}][/a][/div]
1- Yaeh it is because new Kernel and using udev now
2- Audio is working for me!
3- OK it can be patched
4- Here it is OK!

my Z is a SL-C3100


Quote
On a SL-C3200
Very fast!!!!
but the usbfunction.py doesn't start, try to open /proc/deviceinfo/product, that doesn't exist, so i edited the file to override the machine autodetection.

actual problem.. i can't use my planex gw-cf11x, i tried the patches used in beta4 but no luck.
Daniel.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=142030\"][{POST_SNAPBACK}][/a][/div]

I working at a patch for usbfunction.py, and still planning dev a new C/C++ one with Zumi!


Quote
Great work Sashz!

I would have tried it right away if I still can use my 7500C. Right now I'm waiting for a solution or a new Flash chip.

I hope the APM works alright in this release.

I will try the new Cxx00 release later.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=142043\"][{POST_SNAPBACK}][/a][/div]

APM is working nice for me, and battery having very long time.... no more consumes at standby....
« Last Edit: September 22, 2006, 08:16:05 am by anunakin »
[img]http://www.vivaphp.net/imagens/rev2.jpg\" border=\"0\" class=\"linked-sig-image\" /]
Anunakin (Marcus Fazzi)

Nokia N900 32GB + microSD 2GB
Nokia N810 w/ microSD 8GB
Nokia 5310 XpressMusic w/ microSD 1GB
HP48GX->Psion Sienna->Palm m130->Tungsten T->Zaurus SL-5500->C3000->C3100 ALL SOLD

My FEED(On Line AGAIN!!!)

iczer3

  • Jr. Member
  • **
  • Posts: 59
    • View Profile
1.1.0r121 Is Out!
« Reply #21 on: September 22, 2006, 12:56:49 pm »
Hi there,

just installed r121 to my C860. I found that the apm for 860 is
not working. the battery is at 5% all the time and is not charging
at all since the charging (amber) light is not on.

Can anyone help ?

BR,

Felix.

hus

  • Jr. Member
  • **
  • Posts: 57
    • View Profile
    • http://www.huslab.com
1.1.0r121 Is Out!
« Reply #22 on: September 22, 2006, 01:05:14 pm »
Quote
Quote
Tested on SL-C3200 works fine, no problems so far, the installation a bit tricky and i had to do it manualy. great to have on sl-c3200
[div align=\"right\"][a href=\"index.php?act=findpost&pid=141934\"][{POST_SNAPBACK}][/a][/div]

How did you go about installing it manually?  I can get to the point where I flash the new emergency system, but then on reboot there is no activity or charging light.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=141945\"][{POST_SNAPBACK}][/a][/div]

boot to emergency system

and do the installation manually ( i use cf card ) so
Code: [Select]
mount /dev/hdc1 /mnt/cf
cd /mnt/cf
nandlogical /dev/mtd1 WRITE 0x5a0000 0x160000 kernel.img
flash_eraseall /dev/mtd2
nandwrite /dev/mtd2 rootfs.img
reboot
have fun
« Last Edit: September 22, 2006, 01:23:09 pm by hus »
SL-C3200
GP2X-F100 (MKII)

webslngr

  • Newbie
  • *
  • Posts: 38
    • View Profile
    • http://
1.1.0r121 Is Out!
« Reply #23 on: September 22, 2006, 03:20:26 pm »
Quote
boot to emergency system

and do the installation manually ( i use cf card ) so
Code: [Select]
mount /dev/hdc1 /mnt/cf
cd /mnt/cf
nandlogical /dev/mtd1 WRITE 0x5a0000 0x160000 kernel.img
flash_eraseall /dev/mtd2
nandwrite /dev/mtd2 rootfs.img
reboot
have fun
[div align=\"right\"][a href=\"index.php?act=findpost&pid=142076\"][{POST_SNAPBACK}][/a][/div]
The following worked on my 3100 after I reached the emergency system
Code: [Select]
# mount /dev/hdc1 /mnt/cf
# cd /mnt/cf
# ./autoboot.sh /mnt/cf
not as much typing for the lazy

good luck
webslngr
c3100 running pdaXrom b3, ambicom wl1100, a 2nd 4 GB Hitachi microdrive (and various other tools and gadgets)

InSearchOf

  • Administrator
  • Hero Member
  • *****
  • Posts: 1144
    • View Profile
    • http://
1.1.0r121 Is Out!
« Reply #24 on: September 22, 2006, 04:52:02 pm »
Anyone have any luck with network config app?

Late
Sharp Zaurus SL-C3100 and SL-6000L
pdaXrom Developer
Please visit pdaXrom.org for updates
My Blog
IRC #pdaxrom @ FreeNode

hus

  • Jr. Member
  • **
  • Posts: 57
    • View Profile
    • http://www.huslab.com
1.1.0r121 Is Out!
« Reply #25 on: September 23, 2006, 12:49:44 am »
Quote
The following worked on my 3100 after I reached the emergency system
Code: [Select]
# mount /dev/hdc1 /mnt/cf
# cd /mnt/cf
# ./autoboot.sh /mnt/cf
not as much typing for the lazy

good luck
webslngr
[div align=\"right\"][a href=\"index.php?act=findpost&pid=142078\"][{POST_SNAPBACK}][/a][/div]

Great! that's save the time looking to autoboot.sh script and copy&paste proccess
ok now we have a bootable system let's get down to fix minor issues and optimize it, do u have a flickiring screen when overclocking to 520? also it seems i can't get rid of screen shadow with any value i have tried to adj screen: any recomended values?

by the way there are no guides or tips regard using pdaxrom with internal 6GB hard drive, just wondering how to utilize a good HD scheme to wotk with pdaXrom.


thanks for the tip about autooboot.sh script
SL-C3200
GP2X-F100 (MKII)

wrc4

  • Full Member
  • ***
  • Posts: 114
    • View Profile
1.1.0r121 Is Out!
« Reply #26 on: September 23, 2006, 05:46:25 am »
Quote
Hi there,

just installed r121 to my C860. I found that the apm for 860 is
not working. the battery is at 5% all the time and is not charging
at all since the charging (amber) light is not on.

Can anyone help ?

BR,

Felix.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=142075\"][{POST_SNAPBACK}][/a][/div]

Hi iczer3,

Your C860 has the same apm issue as my 7500C. I guess the reason why anunakin says it's OK is because he uses C3100, which at least has some different hardware than C7x0.

I'm just thinking about the possible ways to fix this issue:

1. We can ask Sashz to modify his code or the configuration for C7x0 and release another build. (But Sashz needs to find out what caused the problem)

2. Since the apm in OZ/GPE is working pretty well, can we borrow something from it's rom? My knowledge doesn't allow me to do that by myself now. But someone might be able to do that. I think the apm is a very essential part for pdaXrom. (Right now if I unplug my 7500 it will shut off right away. The testing guys in my company will call it a "Lines down" level 0 defect).

BTW, has anyone tried to build pdaXrom using pdaX86 LiveCD and the pdaXrom builder? I found that it's a very time consuming process and takes up a lot of disk space. But I suppose anyone can use that to build his own pdaXrom with his own fixes and sumbit to Sashz for review.

Anyway, I really hope the apm and the sound issues can be fixed for C7x0 soon.

Keep up the good work Sashz!
Zaurus SL-C1000 (Debian)
Zaurus SL-7500C
Nokia N810
KOHJINSHA SC3
ASUS EEEPC 701
ASUS WL-HDD 2.5
ASUS WL-500GPv2
WD MyBookWorldEdition (with a Segate 500G HD inside)

Civil

  • Full Member
  • ***
  • Posts: 103
    • View Profile
    • http://
1.1.0r121 Is Out!
« Reply #27 on: September 23, 2006, 08:34:36 am »
webslngr
Quote
# cd /mnt/cf
# ./autoboot.sh /mnt/cf
or just:
# cd /mnt/cf
# ./autoboot.sh ./
Zaurus C-3100 ( Gentoo 2007.0 eabi, kernel 2.6.21.6)
http://www.zavrik.info - Russian Zaurus Site.

Andmann

  • Newbie
  • *
  • Posts: 36
    • View Profile
    • http://
1.1.0r121 Is Out!
« Reply #28 on: September 23, 2006, 11:12:09 am »
Hi All,
I installed 121 with no issues on C1000.
The main thing for me at this point is the wireless config is grey'd out.
I noticed that the hostap drives are not installed.

Is something else being used for the wireless config?
Anyone have any luck getting it working?

Thanks.

Andmann
C1000 running pdaXrom R198 SP8.
1G Kingston Ultimate 133x SD
256M Kingston SD
Ambicom WL1100C Wifi
Symbol 802.11b Wifi

InSearchOf

  • Administrator
  • Hero Member
  • *****
  • Posts: 1144
    • View Profile
    • http://
1.1.0r121 Is Out!
« Reply #29 on: September 23, 2006, 01:03:51 pm »
Quote
The main thing for me at this point is the wireless config is grey'd out.

Is something else being used for the wireless config?

[div align=\"right\"][a href=\"index.php?act=findpost&pid=142122\"][{POST_SNAPBACK}][/a][/div]

The app doesnt seem to work... but if you create a new scheme you can make changes and the options arent greyed out....

Late
« Last Edit: September 23, 2006, 01:04:43 pm by InSearchOf »
Sharp Zaurus SL-C3100 and SL-6000L
pdaXrom Developer
Please visit pdaXrom.org for updates
My Blog
IRC #pdaxrom @ FreeNode