NetBSD has been ported to the Sharp Zaurus by NONAKA Kimihiro. Here's the link to the original message and port source:
http://mail-index.netbsd.org/port-arm/2006/11/19/0000.htmlBoot message output is follows.
-----
NetBSD/zaurus booting ...
[ Kernel symbol table missing! ]
pmap_postinit: Allocated 35 static L1 descriptor tables
Copyright © 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
The NetBSD Foundation, Inc. All rights reserved.
Copyright © 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 4.99.3 (GENERIC) #173: Sat Nov 11 16:17:24 JST 2006
nonaka@koharu:/usr/src/sys/arch/zaurus/compile/GENERIC
total memory = 65536 KB
avail memory = 59784 KB
mainbus0 (root)
cpu0 at mainbus0: PXA27x rev 7 (XScale core)
cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled
cpu0: 32KB/32B 32-way Instruction cache
cpu0: 32KB/32B 32-way write-back-locking Data cache
pxaip0 at mainbus0: PXA2x0 Onchip Peripheral Bus
pxaip0: CPU clock = 415.996 MHz
pxaip0: kernel is configured for PXA270, cpu type is PXA270
pxaintc0 at pxaip0 addr 0x40d00000-0x40d0001f: Interrupt Controller
pxagpio0 at pxaip0 addr 0x40e00000-0x40e0014f: GPIO Controller
com0 at pxaip0 a: ns16550a, working fifo
com0: console
com1 at pxaip0 addr 0x40200000-0x4020001f intr 21: ns16550a, working fifo
com2 at pxaip0 addr 0x40700000-0x4070001f intr 20: ns16550a, working fifo
saost0 at pxaip0 addr 0x40a00000-0x40a0001f
saost0: SA-11x0 OS Timer
pxapcic0 at pxaip0: 2 slots
pcmcia0 at pxapcic0
pcmcia1 at pxapcic0
scoop0 at pxaip0: PCMCIA/GPIO controller
scoop1 at pxaip0: PCMCIA/GPIO controller
clock: hz=100 stathz=64
wdc0 at pcmcia0 function 0: <HITACHI, microdrive>
wdc0: i/o mapped mode
atabus0 at wdc0 channel 0
wdc1 at pcmcia1 function 0: <, , >
wdc1: i/o mapped mode
atabus1 at wdc1 channel 0
wd0 at atabus0 drive 0: <HMS360606D5CF00>
wd0: drive supports 32-sector PIO transfers, LBA addressing
wd0: 5859 MB, 11905 cyl, 16 head, 63 sec, 512 bytes/sect x 12000556 sectors
wd0: drive supports PIO mode 4
wd1 at atabus1 drive 0: <>
wd1: drive supports 1-sector PIO transfers, LBA addressing
wd1: 7935 MB, 16122 cyl, 16 head, 63 sec, 512 bytes/sect x 16250976 sectors
wd1: drive supports PIO mode 4
root device: wd1
dump device (default wd1b):
file system (default generic):
root on wd1a dumps on wd1b
mountroot: trying ffs...
root file system type: ffs
init path (default /sbin/init):
init: copying out path `/sbin/init' 11
Sat Nov 11 07:31:22 UTC 2006
swapctl: adding /dev/wd1b as swap device at priority 0
Checking for botched superblock upgrades: done.
Starting file system checks:
fsck_ffs: ioctl (DIOCGWEDGEINFO): Inappropriate ioctl for device
/dev/rwd1a: file system is clean; not checking
Setting tty flags.
Setting sysctl variables:
Starting network.
Hostname: zaurus
Configuring network interfaces:.
route: writing to routing socket: Network is unreachable
add net default: gateway gw: Network is unreachable
Adding interface aliases:
Building databases...
Starting syslogd.
Mounting all filesystems...
Clearing /tmp.
Creating a.out runtime link editor directory cache.
Checking quotas: done.
Setting securelevel: kern.securelevel: 0 -> 1
Starting virecover.
Starting local daemons:.
Updating motd.
Starting inetd.
Sat Nov 11 07:31:29 UTC 2006
NetBSD/zaurus (zaurus) (console)
login:
If you take a look at the source you'll notice that it makes use of the OpenBSD
zbsdmod.o and a slightly modified OpenBSD
zboot.
Further information can be found here:
http://d.hatena.ne.jp/nonakap/20061111/p1 Finally, we may begin to see some of the Zaurii's features rise from the dead!
