← previous next →
Pages: [1]

Author Topic: Coming Back To Cacko From Oz/opie  (Read 4684 times)

Matthewmongan

  • Newbie
  • *
  • Posts: 24
    • View Profile
Coming Back To Cacko From Oz/opie
« on: February 24, 2007, 08:13:49 pm »
alright, i put OZ on my z and now I'm stuck with it. i want cacko back but i don't know how to restore the hd partition table in OZ. i have downloaded the trisoft hd images but I'm still in the dark, i try to re-flash cacko but when the sd/cf card menu is supposed to load after the Japanese menu, oz boots.
Logged

adf

  • Hero Member
  • *****
  • Posts: 2807
    • View Profile
    • http://
Coming Back To Cacko From Oz/opie
« Reply #1 on: February 24, 2007, 10:03:43 pm »
Quote
alright, i put OZ on my z and now I'm stuck with it. i want cacko back but i don't know how to restore the hd partition table in OZ. i have downloaded the trisoft hd images but I'm still in the dark, i try to re-flash cacko but when the sd/cf card menu is supposed to load after the Japanese menu, oz boots.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=155187\"][{POST_SNAPBACK}][/a][/div]
Trisoft has pretty good instructions on his site, and 2 methods, i think

Follow the directions there?--and don't forget to re-image your HD

I have done exactly this using exactly those images (think I had to resort to the emergency method, though).

You will have (probably) to do a nand restore from the trisoft image, and an hd restore--then flash
Logged
**3100 Zubuntu Jaunty,(working on Cacko dualboot), 16G A-Data internal CF, 4G SD, Ambicom WL-1100C Cf, linksys usb ethernet,  BelkinF8T020 BT card, Belkin F8U1500-E Ir kbd, mini targus usb mouse, rechargeble AC/DC powered USB hub, psp cables and battery extenders.

**6000l  Tetsuized Sharprom, installed on internal flash only 1G sd, 2G cf

Matthewmongan

  • Newbie
  • *
  • Posts: 24
    • View Profile
Coming Back To Cacko From Oz/opie
« Reply #2 on: February 25, 2007, 05:38:49 pm »
Quote
Quote
alright, i put OZ on my z and now I'm stuck with it. i want cacko back but i don't know how to restore the hd partition table in OZ. i have downloaded the trisoft hd images but I'm still in the dark, i try to re-flash cacko but when the sd/cf card menu is supposed to load after the Japanese menu, oz boots.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=155187\"][{POST_SNAPBACK}][/a][/div]
Trisoft has pretty good instructions on his site, and 2 methods, i think

Follow the directions there?--and don't forget to re-image your HD

I have done exactly this using exactly those images (think I had to resort to the emergency method, though).

You will have (probably) to do a nand restore from the trisoft image, and an hd restore--then flash
[div align=\"right\"][a href=\"index.php?act=findpost&pid=155192\"][{POST_SNAPBACK}][/a][/div]

when i do a nand restore in the D+M menu i get a format error. what am i doing wrong?

im sorry for being a noob. but i need a serious step by step guide to get out of this muck.
« Last Edit: February 25, 2007, 05:48:16 pm by Matthewmongan »
Logged

speculatrix

  • Administrator
  • Hero Member
  • *****
  • Posts: 3707
    • View Profile
Coming Back To Cacko From Oz/opie
« Reply #3 on: February 25, 2007, 05:46:19 pm »
format error?  this is a well-known problem (seach forum for flash memory partition)... briefly
1) check the card has a partition
2) check its fat16 formatted - a fresh format is a good idea to prevent fragmentation
3) check the md5 of the files (for windows, get this program http://www.whitsoftdev.com/md5/)
Logged
Gemini 4G/Wi-Fi owner, formerly zaurus C3100 and 860 owner; also owner of an HTC Doubleshot, a Zaurus-like phone.

Matthewmongan

  • Newbie
  • *
  • Posts: 24
    • View Profile
Coming Back To Cacko From Oz/opie
« Reply #4 on: February 25, 2007, 07:07:10 pm »
Quote
format error?  this is a well-known problem (seach forum for flash memory partition)... briefly
1) check the card has a partition
2) check its fat16 formatted - a fresh format is a good idea to prevent fragmentation
3) check the md5 of the files (for windows, get this program http://www.whitsoftdev.com/md5/)
[div align=\"right\"][a href=\"index.php?act=findpost&pid=155242\"][{POST_SNAPBACK}][/a][/div]


alright, thank you. i have cacko flashed on my system. all i have to do now is restore the hdd partitions. to my understanding the pdaxromii3 updater.sh has a nice feature that restores the hd partitions. im going to give that a try. im not to good with fdisk.
Logged

Matthewmongan

  • Newbie
  • *
  • Posts: 24
    • View Profile
Coming Back To Cacko From Oz/opie
« Reply #5 on: February 25, 2007, 07:19:37 pm »
ok, so i repartitioned the drive with the updater.sh utility but im still getting

"Error!! HDD is not initialized!"

i think this has something to do with the files from trisoft that i am supposed to place in the individual partitions. the only problem is that i dont know how to do that.
Logged

Matthewmongan

  • Newbie
  • *
  • Posts: 24
    • View Profile
Coming Back To Cacko From Oz/opie
« Reply #6 on: February 25, 2007, 09:04:47 pm »
ok, im trying to cp the hdd1sys and hdd2sys files in their respected partitions but i havent had any luck. im using a sd card, i am assuming the address of the card is /dev/sdc so in command i should be able to write

cp dev/sdc/hdd1sys dev/hda1

but that doesn't work.
« Last Edit: February 25, 2007, 09:05:08 pm by Matthewmongan »
Logged

adf

  • Hero Member
  • *****
  • Posts: 2807
    • View Profile
    • http://
Coming Back To Cacko From Oz/opie
« Reply #7 on: February 25, 2007, 09:32:36 pm »
If I recall correctly, you have to put the disk image files on cf and use the D+M menu--find a hrd disk restore option in there somewhere and restore  from cf.

Sorry not to be more specific--haven't done that in nearly a year
Logged
**3100 Zubuntu Jaunty,(working on Cacko dualboot), 16G A-Data internal CF, 4G SD, Ambicom WL-1100C Cf, linksys usb ethernet,  BelkinF8T020 BT card, Belkin F8U1500-E Ir kbd, mini targus usb mouse, rechargeble AC/DC powered USB hub, psp cables and battery extenders.

**6000l  Tetsuized Sharprom, installed on internal flash only 1G sd, 2G cf

Meanie

  • Hero Member
  • *****
  • Posts: 2803
    • View Profile
    • http://www.users.on.net/~hluc/myZaurus/
Coming Back To Cacko From Oz/opie
« Reply #8 on: February 25, 2007, 10:04:36 pm »
Quote
ok, im trying to cp the hdd1sys and hdd2sys files in their respected partitions but i havent had any luck. im using a sd card, i am assuming the address of the card is /dev/sdc so in command i should be able to write

cp dev/sdc/hdd1sys dev/hda1

but that doesn't work.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=155265\"][{POST_SNAPBACK}][/a][/div]

your mounted SD card would be /mnt/card and the respective hdd partitions, /hdd1 and /hdd2
you don't copy things to raw partitions...
Logged
SL-C3000 - pdaXii13 build5.4.9 (based on pdaXrom beta3) / SL-C3100 - Sharp ROM 1.02 JP (heavily customised)
Netgear MA701 CF, SanDisk ConnectPlus CF, Socket Bluetooth CF, 4GB Kingston CF,  4GB pqi SD, 4GB ChoiceOnly SD, 2GB SanDisk SD USB Plus, 1GB SanDisk USB Plus, 1GB Transcend SD, 2GB SanDisk MicroSD with SD adaptor, Piel Frama Leather Case, GoldX 5-in-1 USB cable, USB hub, USB mouse, USB keyboard, USB ethernet, USB HDD, many other USB accessories...
(Zaurus SL-C3000 owner since March 14. 2005, Zaurus SL-C3100 owner since September 21. 2005)
http://members.iinet.net.au/~wyso/myZaurus - zBook3K

Matthewmongan

  • Newbie
  • *
  • Posts: 24
    • View Profile
Coming Back To Cacko From Oz/opie
« Reply #9 on: February 25, 2007, 11:01:00 pm »
Quote
Quote
ok, im trying to cp the hdd1sys and hdd2sys files in their respected partitions but i havent had any luck. im using a sd card, i am assuming the address of the card is /dev/sdc so in command i should be able to write

cp dev/sdc/hdd1sys dev/hda1

but that doesn't work.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=155265\"][{POST_SNAPBACK}][/a][/div]

your mounted SD card would be /mnt/card and the respective hdd partitions, /hdd1 and /hdd2
you don't copy things to raw partitions...
[div align=\"right\"][a href=\"index.php?act=findpost&pid=155271\"][{POST_SNAPBACK}][/a][/div]


alright, then i have a 750$ brick
Logged

adf

  • Hero Member
  • *****
  • Posts: 2807
    • View Profile
    • http://
Coming Back To Cacko From Oz/opie
« Reply #10 on: February 26, 2007, 12:11:07 am »
Quote
Quote
Quote
ok, im trying to cp the hdd1sys and hdd2sys files in their respected partitions but i havent had any luck. im using a sd card, i am assuming the address of the card is /dev/sdc so in command i should be able to write

cp dev/sdc/hdd1sys dev/hda1

but that doesn't work.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=155265\"][{POST_SNAPBACK}][/a][/div]

your mounted SD card would be /mnt/card and the respective hdd partitions, /hdd1 and /hdd2
you don't copy things to raw partitions...
[div align=\"right\"][a href=\"index.php?act=findpost&pid=155271\"][{POST_SNAPBACK}][/a][/div]


alright, then i have a 750$ brick
[div align=\"right\"][a href=\"index.php?act=findpost&pid=155274\"][{POST_SNAPBACK}][/a][/div]
probably not.  but you likely do have a headache.

can you D+M?
Logged
**3100 Zubuntu Jaunty,(working on Cacko dualboot), 16G A-Data internal CF, 4G SD, Ambicom WL-1100C Cf, linksys usb ethernet,  BelkinF8T020 BT card, Belkin F8U1500-E Ir kbd, mini targus usb mouse, rechargeble AC/DC powered USB hub, psp cables and battery extenders.

**6000l  Tetsuized Sharprom, installed on internal flash only 1G sd, 2G cf

stormer

  • Jr. Member
  • **
  • Posts: 52
    • View Profile
    • http://
Coming Back To Cacko From Oz/opie
« Reply #11 on: February 26, 2007, 05:08:09 am »
have you tried /dev/mmcda rather than /dev/sdc ?

I have previously moved from OE back to cacko and don't remember ever using
/dev/sdc for my SD cards (1G Danelec and 1G kingston)
Logged
C3100   - Cacko with PDAXRom and OZ pretensions !

5600 - 255, 256m & 1G Sandisk SD, Wizgo 802.11b, Pocketop irk, bluemonkey BT, Watapon, OZ 3.5.3 Henteges, with a sprinkling of pocketworkstation - depending on the weather !

speculatrix

  • Administrator
  • Hero Member
  • *****
  • Posts: 3707
    • View Profile
Coming Back To Cacko From Oz/opie
« Reply #12 on: February 26, 2007, 05:31:11 am »
Quote
Quote
your mounted SD card would be /mnt/card and the respective hdd partitions, /hdd1 and /hdd2
you don't copy things to raw partitions...
[div align=\"right\"][a href=\"index.php?act=findpost&pid=155271\"][{POST_SNAPBACK}][/a][/div]
alright, then i have a 750$ brick
[div align=\"right\"][a href=\"index.php?act=findpost&pid=155274\"][{POST_SNAPBACK}][/a][/div]

don't panic, it's pretty easy to restore your hard drive partitions... check out meanie's guide to it, and the data for the drive is on Trisoft's support website... just repartition /dev/hda as per the guide, making sure to set up each partition as the right type, format them, then copy on the data.
Logged
Gemini 4G/Wi-Fi owner, formerly zaurus C3100 and 860 owner; also owner of an HTC Doubleshot, a Zaurus-like phone.

Matthewmongan

  • Newbie
  • *
  • Posts: 24
    • View Profile
Coming Back To Cacko From Oz/opie
« Reply #13 on: February 26, 2007, 10:07:16 am »
Quote
Quote
Quote
Quote
ok, im trying to cp the hdd1sys and hdd2sys files in their respected partitions but i havent had any luck. im using a sd card, i am assuming the address of the card is /dev/sdc so in command i should be able to write

cp dev/sdc/hdd1sys dev/hda1

but that doesn't work.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=155265\"][{POST_SNAPBACK}][/a][/div]

your mounted SD card would be /mnt/card and the respective hdd partitions, /hdd1 and /hdd2
you don't copy things to raw partitions...
[div align=\"right\"][a href=\"index.php?act=findpost&pid=155271\"][{POST_SNAPBACK}][/a][/div]


alright, then i have a 750$ brick
[div align=\"right\"][a href=\"index.php?act=findpost&pid=155274\"][{POST_SNAPBACK}][/a][/div]
probably not.  but you likely do have a headache.

can you D+M?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=155279\"][{POST_SNAPBACK}][/a][/div]

yes i can d+m. im not sure what to do with it tough

what i been trying to do in console is:

mount the partiton with
 
# mount /dev/hda1* /hdd1

and make the .sys file with

# mkdir .sys

i use

# cp mnt/card/hdd1sys/hdimage2.tgz* /hdd1/.sys

and

# cp mnt/card/hdd1sys/hdlist1.dat* /hdd1/.sys

to copy the files into the .sys file. unfortunately thats not working.  so i dont know what to do at this point
Logged

speculatrix

  • Administrator
  • Hero Member
  • *****
  • Posts: 3707
    • View Profile
Coming Back To Cacko From Oz/opie
« Reply #14 on: February 26, 2007, 11:50:28 am »
Quote
what i been trying to do in console is:

mount the partiton with
 
# mount /dev/hda1* /hdd1

and make the .sys file with

# mkdir .sys

i use

# cp mnt/card/hdd1sys/hdimage2.tgz* /hdd1/.sys

and

# cp mnt/card/hdd1sys/hdlist1.dat* /hdd1/.sys

to copy the files into the .sys file. unfortunately thats not working.  so i dont know what to do at this point
[div align=\"right\"][a href=\"index.php?act=findpost&pid=155297\"][{POST_SNAPBACK}][/a][/div]

you need to unpack the file rather than simply copying it in. change directory to /hdd2 (e.g.) and decompress and untar, thus

cd /hdd2
pwd
zcat /mnt/card/hdd1sys/hdimage2.tgz* | tar xf -
Logged
Gemini 4G/Wi-Fi owner, formerly zaurus C3100 and 860 owner; also owner of an HTC Doubleshot, a Zaurus-like phone.
Pages: [1]
← previous next →