Can't Find Pdaxii13-custom.tgz...

[Jon_J]

As a last resort, try the emergency console again and mount your CF card manually

mount /dev/hda1 /mnt/cf

or

mount/dev/hdc1 /mnt/cf

In your case, since you don't have a hard drive, I think the first one should work.

mount /dev/hda1 /mnt/cf

[Meanie]

As a last resort, try the emergency console again and mount your CF card manually

mount /dev/hda1 /mnt/cf

or

mount/dev/hdc1 /mnt/cf

In your case, since you don't have a hard drive, I think the first one should work.

mount /dev/hda1 /mnt/cf
[div align=\"right\"][a href=\"index.php?act=findpost&pid=156534\"][{POST_SNAPBACK}][/a][/div]

give up on the idea of trying the emergency console already. there is a bug in the script and unless that is fixed, nothing will work...

[tombraider]

Thanks,  Meanie,  let me tell you that your amazing work is greatly appreciated and you should concentrate your efforts on the most pressing issues and not be concerning yourself with unimportant issues regarding pdaXii13.

So,  please, don't spend any time on my little problem.  I'll just do a complete reflash when I see there is a really stable version out there.

As a last resort, try the emergency console again and mount your CF card manually

mount /dev/hda1 /mnt/cf

or

mount/dev/hdc1 /mnt/cf

In your case, since you don't have a hard drive, I think the first one should work.

mount /dev/hda1 /mnt/cf
[div align=\"right\"][a href=\"index.php?act=findpost&pid=156534\"][{POST_SNAPBACK}][/a][/div]

give up on the idea of trying the emergency console already. there is a bug in the script and unless that is fixed, nothing will work...
[div align=\"right\"][a href=\"index.php?act=findpost&pid=156556\"][{POST_SNAPBACK}][/a][/div]

[Ling]

Hopefully since joining the pdaXrom dev team, Meanie is working on a fully functional 2.6 version, pdaXii13-ng or pdaXrom-works.

[Meanie]

pdaXii13-custom.tgz has been fixed and works now. This is not a trivial issue because this script is used to update and build the pdaXii13 images, so without it working properly there wont be updated and working builds of pdaXii13...

[tombraider]

Just tried it and there's no "x is still running" but just got a huge run of errors saying it can't find paths.  It's looking in /upgrade/usr/share/pixmaps/zbackup.png,  for instance,  when the path should be maybe /upgrade/custom/pixmaps/zbackup.png or /custom/pixmaps/zbackup.png?  I don't know enough to know which it should be...hopefully,  you do??

Errors like this:
cp: unable to open '/upgrade/usr/share/pixmaps/suspend.png: No such file or directory

ALL directories are wrong,  of course, not just pixmaps.  I'm just giving that as an example.

pdaXii13-custom.tgz has been fixed and works now. This is not a trivial issue because this script is used to update and build the pdaXii13 images, so without it working properly there wont be updated and working builds of pdaXii13...
[div align=\"right\"][a href=\"index.php?act=findpost&pid=156735\"][{POST_SNAPBACK}][/a][/div]

[Meanie]

Just tried it and there's no "x is still running" but just got a huge run of errors saying it can't find paths.  It's looking in /upgrade/usr/share/pixmaps/zbackup.png,  for instance,  when the path should be maybe /upgrade/custom/pixmaps/zbackup.png or /custom/pixmaps/zbackup.png?  I don't know enough to know which it should be...hopefully,  you do??

Errors like this:
cp: unable to open '/upgrade/usr/share/pixmaps/suspend.png: No such file or directory

ALL directories are wrong,  of course, not just pixmaps.  I'm just giving that as an example.

pdaXii13-custom.tgz has been fixed and works now. This is not a trivial issue because this script is used to update and build the pdaXii13 images, so without it working properly there wont be updated and working builds of pdaXii13...
[div align=\"right\"][a href=\"index.php?act=findpost&pid=156735\"][{POST_SNAPBACK}][/a][/div]

[div align=\"right\"][a href=\"index.php?act=findpost&pid=156739\"][{POST_SNAPBACK}][/a][/div]

it looks like you ran

./install-fix-beta3.sh upgrade


instead of


./install-fix-beta3.sh / upgrade

[tombraider]

Hmmm,  you're right    Okay, I also had to cd to the "custom" directory in order to get the ./install-fix-beta3.sh / upgrade command to work.
It started updating everything but still gave the following errors after a long string of successful updates:

Code: [Select]

cp: unable to open 'usr/bin/Xdialog' : no such file or directory
chmod: /usr/bin/Xdialog: no such file or directory
..updating /usr/lib
..updating /usr/share
cp: unable to open '/usr/share/pixmaps/firefox.png': no such file or directory
chmod: /usr/share/pixmaps/firefox.png: no such file or directory
cp: unable to open '/usr/share/pixmaps/firefox.png' : no such file or directory
I have Firefox installed on my sd card which I disabled before the install so maybe that's what generated that error.
Okay,  at first glance all seems okay...items in taskbar are different from my previous settings; aterm has the "root-"  prompt and my previous inputs are gone - fresh start.

Will try everything bit by bit and get back to you.  Maybe will get back to you tomorrow on this if I run out of steam tonight.  :-)  Looks good so far.

Thanks.

Just tried it and there's no "x is still running" but just got a huge run of errors saying it can't find paths.  It's looking in /upgrade/usr/share/pixmaps/zbackup.png,  for instance,  when the path should be maybe /upgrade/custom/pixmaps/zbackup.png or /custom/pixmaps/zbackup.png?  I don't know enough to know which it should be...hopefully,  you do??

Errors like this:
cp: unable to open '/upgrade/usr/share/pixmaps/suspend.png: No such file or directory

ALL directories are wrong,  of course, not just pixmaps.  I'm just giving that as an example.

pdaXii13-custom.tgz has been fixed and works now. This is not a trivial issue because this script is used to update and build the pdaXii13 images, so without it working properly there wont be updated and working builds of pdaXii13...
[div align=\"right\"][a href=\"index.php?act=findpost&pid=156735\"][{POST_SNAPBACK}][/a][/div]

[div align=\"right\"][a href=\"index.php?act=findpost&pid=156739\"][{POST_SNAPBACK}][/a][/div]

it looks like you ran

./install-fix-beta3.sh upgrade


instead of


./install-fix-beta3.sh / upgrade
[div align=\"right\"][a href=\"index.php?act=findpost&pid=156740\"][{POST_SNAPBACK}][/a][/div]

[tombraider]

Accidentally hit the on/off switch and am having the old problem of not being able to start it up again.  Tried hitting "home" - doesn't work;  tried "on/off" and sometimes get a flicker but no joy.     Maybe time to reset.

Hmmm,  you're right    Okay, I also had to cd to the "custom" directory in order to get the ./install-fix-beta3.sh / upgrade command to work.
It started updating everything but still gave the following errors after a long string of successful updates:

Code: [Select]

cp: unable to open 'usr/bin/Xdialog' : no such file or directory
chmod: /usr/bin/Xdialog: no such file or directory
..updating /usr/lib
..updating /usr/share
cp: unable to open '/usr/share/pixmaps/firefox.png': no such file or directory
chmod: /usr/share/pixmaps/firefox.png: no such file or directory
cp: unable to open '/usr/share/pixmaps/firefox.png' : no such file or directory
I have Firefox installed on my sd card which I disabled before the install so maybe that's what generated that error.
Okay,  at first glance all seems okay...items in taskbar are different from my previous settings; aterm has the "root-"  prompt and my previous inputs are gone - fresh start.

Will try everything bit by bit and get back to you.  Maybe will get back to you tomorrow on this if I run out of steam tonight.  :-)  Looks good so far.

Thanks.

Just tried it and there's no "x is still running" but just got a huge run of errors saying it can't find paths.  It's looking in /upgrade/usr/share/pixmaps/zbackup.png,  for instance,  when the path should be maybe /upgrade/custom/pixmaps/zbackup.png or /custom/pixmaps/zbackup.png?  I don't know enough to know which it should be...hopefully,  you do??

Errors like this:
cp: unable to open '/upgrade/usr/share/pixmaps/suspend.png: No such file or directory

ALL directories are wrong,  of course, not just pixmaps.  I'm just giving that as an example.

pdaXii13-custom.tgz has been fixed and works now. This is not a trivial issue because this script is used to update and build the pdaXii13 images, so without it working properly there wont be updated and working builds of pdaXii13...
[div align=\"right\"][a href=\"index.php?act=findpost&pid=156735\"][{POST_SNAPBACK}][/a][/div]

[div align=\"right\"][a href=\"index.php?act=findpost&pid=156739\"][{POST_SNAPBACK}][/a][/div]

it looks like you ran

./install-fix-beta3.sh upgrade


instead of


./install-fix-beta3.sh / upgrade
[div align=\"right\"][a href=\"index.php?act=findpost&pid=156740\"][{POST_SNAPBACK}][/a][/div]

[div align=\"right\"][a href=\"index.php?act=findpost&pid=156743\"][{POST_SNAPBACK}][/a][/div]

[Jon_J]

moved post back, since meanie replied to it here.
I had to cd to the appropriate directory twice to get this working.
Original instructions below:
----------------------------
# mkdir /mnt/cf/upgrade
# zcat pdaXii13-custom.tgz | tar xvf - -C /mnt/cf/upgrade
# cd /mnt/cf/upgrade
# /etc/rc.d/init.d/sd stop
# ./install-fix-beta3.sh / upgrade
-------------------------------------
my additional commands inserted
-------------------------------------
# mkdir /mnt/cf/upgrade
# cd /mnt/cf
# zcat pdaXii13-custom.tgz | tar xvf - -C /mnt/cf/upgrade
# /etc/rc.d/init.d/sd stop
# cd /mnt/cf/upgrade/custom
# ./install-fix-beta3.sh / upgrade
-------------------------------------
I only got one error upon install, and it was something like this.
wrong model detected - zaurus model OK
continue?
Y - N

I had a custom clock that got replaced. Now I'm back to military time (24 hr clock)
Some of my custom icons were replaced by the ones that meanie had in the original flash install.
My "Style" was changed back, I prefer "Artwiz because the titlebars are larger.
The taskbar along the bottom needs to be re-populated with the apps I had put there.
Other than that, everything looks fine. smile.gif
version: pdaxii13 build5.3.3 (Charlie) It still identifies my Zaurus as Borzoi, not Terrier. No big deal here.
(I kinda liked the name Sally better, she was one hot chick) smile.gif

EDIT: edited the cd /mnt/cf/upgrade/custom line to be just before executing the install.
EDIT2: one more thing, the screenshot icon *.png file either got deleted or returned back to prior akita install with no icon for this.
I had to add this icon myself. Also I installed scrot and any dependencies to get *.png screenshots.
The screencap icon shows a ripped piece of paper instead of the correct one. This is in gqview.

[Meanie]

ok, the directory for the files is trival, i will correct that when i can...
however, your zaurus model is a worry. it should show the correct model. yours seems completely wrong because you should had ended up with Sally. Charlie is for corgi models, ie 7x0/8x0
Sally is for all the akita based models, ie C1000/C3100/C3200
 checked the screenshot image. its the wrong image and will be replaced with the correct one....

I also had to cd to the appropriate directory twice to get this working.
Original instructions below:
----------------------------
# mkdir /mnt/cf/upgrade
# zcat pdaXii13-custom.tgz | tar xvf - -C /mnt/cf/upgrade
# cd /mnt/cf/upgrade
# /etc/rc.d/init.d/sd stop
# ./install-fix-beta3.sh / upgrade
-------------------------------------
my additional commands inserted
-------------------------------------
# mkdir /mnt/cf/upgrade
# cd /mnt/cf
# zcat pdaXii13-custom.tgz | tar xvf - -C /mnt/cf/upgrade
# /etc/rc.d/init.d/sd stop
# cd /mnt/cf/upgrade/custom
# ./install-fix-beta3.sh / upgrade
-------------------------------------
I only got one error upon install, and it was something like this.
wrong model detected - zaurus model OK
continue?
Y - N

I had a custom clock that got replaced. Now I'm back to military time (24 hr clock)
Some of my custom icons were replaced by the ones that meanie had in the original flash install.
My "Style" was changed back, I prefer "Artwiz because the titlebars are larger.
The taskbar along the bottom needs to be re-populated with the apps I had put there.
Other than that, everything looks fine.
version: pdaxii13 build5.3.3 (Charlie) It still identifies my Zaurus as Borzoi, not Terrier. No big deal here.
(I kinda liked the name Sally better, she was one hot chick)

EDIT: edited the cd /mnt/cf/upgrade/custom line to be just before executing the install.
EDIT2: one more thing, the screenshot icon *.png file either got deleted or returned back to prior akita install with no icon for this.
I had to add this icon myself. Also I installed scrot and any dependencies to get *.png screenshots.
The screencap icon shows a ripped piece of paper instead of the correct one. This is in gqview.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=156745\"][{POST_SNAPBACK}][/a][/div]

[Jon_J]

should I find the correct pdaXii13-custom.tgz file?
and do it again?
How do I make sure if I have the correct pdaXii13-custom.tgz file?
Can I look inside the archive and find some identifier?
I got that file from your page meanie, it's right above the install instructions.
"You can get the upgrade files pdaXii13-custom.tgz from tyrannozaurus. There is an install script contained in the tarball..."

Where is the "akita" one located? It's not on the akita page at tryannozaurus

[Meanie]

should I find the correct pdaXii13-custom.tgz file?
and do it again?
How do I make sure if I have the correct pdaXii13-custom.tgz file?
Can I look inside the archive and find some identifier?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=156749\"][{POST_SNAPBACK}][/a][/div]

there is only one pdaXii13-custom.tgz file for all models.
your problem seems to be that your Z is telling lies about who it is.

what does the following show?


cat /proc/deviceinfo/product
cat /proc/cpuinfo
cat /proc/version

[Jon_J]

should I find the correct pdaXii13-custom.tgz file?
and do it again?
How do I make sure if I have the correct pdaXii13-custom.tgz file?
Can I look inside the archive and find some identifier?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=156749\"][{POST_SNAPBACK}][/a][/div]

there is only one pdaXii13-custom.tgz file for all models.
your problem seems to be that your Z is telling lies about who it is.

what does the following show?


cat /proc/deviceinfo/product
cat /proc/cpuinfo
cat /proc/version
[div align=\"right\"][a href=\"index.php?act=findpost&pid=156750\"][{POST_SNAPBACK}][/a][/div]

cat /proc/deviceinfo/product
SL-C3200
cat /proc/cpuinfo
Processor   : XScale-PXA270 rev 7 (v5l)
BogoMIPS   : 415.33
Features   : swp half thumb fastmult edsp
CPU implementor   : 0x69
CPU architecture: 5TE
CPU variant   : 0x0
CPU part   : 0x411
CPU revision   : 7
Cache type   : undefined 5
Cache clean   : undefined 5
Cache lockdown   : undefined 5
Cache unified   : harvard
I size      : 32768
I assoc      : 32
I line length   : 32
I sets      : 32
D size      : 32768
D assoc      : 32
D line length   : 32
D sets      : 32

Hardware   : SHARP Borzoi
Revision   : 0000
Serial      : 0000000000000000

cat /proc/version
Linux version 2.4.20 (sash@pdaX86) (gcc version 2.95.3 20010315 (release)) #1 Sat, 25 Mar 2006 15:03:52 +0000

Sorry it took so long, I got in a hurry and converted my HDD to readonly by unplugging my USB too soon.

[Meanie]

should I find the correct pdaXii13-custom.tgz file?
and do it again?
How do I make sure if I have the correct pdaXii13-custom.tgz file?
Can I look inside the archive and find some identifier?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=156749\"][{POST_SNAPBACK}][/a][/div]

there is only one pdaXii13-custom.tgz file for all models.
your problem seems to be that your Z is telling lies about who it is.

what does the following show?


cat /proc/deviceinfo/product
cat /proc/cpuinfo
cat /proc/version
[div align=\"right\"][a href=\"index.php?act=findpost&pid=156750\"][{POST_SNAPBACK}][/a][/div]

cat /proc/deviceinfo/product
SL-C3200
cat /proc/cpuinfo
Processor   : XScale-PXA270 rev 7 (v5l)
BogoMIPS   : 415.33
Features   : swp half thumb fastmult edsp
CPU implementor   : 0x69
CPU architecture: 5TE
CPU variant   : 0x0
CPU part   : 0x411
CPU revision   : 7
Cache type   : undefined 5
Cache clean   : undefined 5
Cache lockdown   : undefined 5
Cache unified   : harvard
I size      : 32768
I assoc      : 32
I line length   : 32
I sets      : 32
D size      : 32768
D assoc      : 32
D line length   : 32
D sets      : 32

Hardware   : SHARP Borzoi
Revision   : 0000
Serial      : 0000000000000000

cat /proc/version
Linux version 2.4.20 (sash@pdaX86) (gcc version 2.95.3 20010315 (release)) #1 Sat, 25 Mar 2006 15:03:52 +0000

Sorry it took so long, I got in a hurry and converted my HDD to readonly by unplugging my USB too soon.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=156753\"][{POST_SNAPBACK}][/a][/div]

hmm... it says its a SL-C3200 but also that it is a SHARP Borzoi...